my boosted d16 setup
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: my boosted d16 setup (UJLSMoFo)
235hp at 12psi 12.5@110
265hp at 14psi 12.3@113
285hp at 18 psi 12.1@86 LETTING OFF
265hp at 14psi 12.3@113
285hp at 18 psi 12.1@86 LETTING OFF
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: my boosted d16 setup (UJLSMoFo)
turboed d16z6, eagle rods, je pistons, studded bottom end, ported and gasket matched head, skunk2 manifold, 255 walbro, 550 rc injectors, aem fuel rail, b&m fuel reg, motor mount inserts, msd 6al, blaster and cap, 2step (4600rpms), btm, apexi vfac, timer and bov, precision intercooler, intercooler sprayer, nos fogger efi kit (50shot), greddy catch can. 6puck sprung clutch, phatom grip, hp coilovers.
#6
Re: my boosted d16 setup (UJLSMoFo)
285whp on the bottle? Must be a small turbo....
Anyways, is this car daily driven?
Hows the clutch in traffic? Im thnking of upgrading to the same one as mine is slipping, but Im a little over 300whp on my sohc @ 16psi and just looking for a line on the clutch
Nice setup though
Anyways, is this car daily driven?
Hows the clutch in traffic? Im thnking of upgrading to the same one as mine is slipping, but Im a little over 300whp on my sohc @ 16psi and just looking for a line on the clutch
Nice setup though
#7
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: my boosted d16 setup (W O T)
no bottle, t3 super 60trim drove it for a year. and the clutch is great, it just eats away at your flywheel over time. its a 6puck clutchnet with a act extreme pressure plate
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: my boosted d16 setup (wantboost)
thanks i sold the car 2 mons ago and ran across some pics to share.
#12
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: my boosted d16 setup (zombie247)
i made the intercooler sprayer. at the track i gained about 6 to 7 more mph at the top end. tried spraying it on the dyno, but it didnt work to well. it would lean the car out. sucking the nitrous through the intake.
#22
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: east coast performance and tuning, jacksonville, nc
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tad)
never had time to run it after the mani was put on sold it like the next day. 2 dyno pulls for 12 pounds and let it ride. 226hp with a very safe a/f. the guy i sold it to didnt know anything about turbos. his trying to sell it right now, because he is scared of it. his asking 10,000.00 that what i sold it to him for.