zexxbo

lets see it.
hands down, who is putting down the most power in their 4 banger. doesnt matter if its d,b, h, k or f. as long as its a honda motor and its putting down power, i wanna who is king.

ive searched and looked vigorously and havent been able to find who is putting down the most power. i know what all of the parts are rated up to but havent found anyone who has broken the best parts from too much power.
aebs/benson sleeves- rated to 1000hp
pauter rods- rated to 1000hp
cp/wiseco pistons- rated to 800hp
gt42r- rated to 1000hp

my friend has a 2.0 gsr hatch w/ gt40r @ 35lbs is at 724ish whp

BioXide02

820 whp with issues.. Should of been higher.

https://honda-tech.com/zerothread?id=1824653

SOHCD16y8

Did Eggum ever come out with an actual number? It has to be around 1200.

zexxbo

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHCD16y8 &raquo;</TD></TR><TR><TD CLASS="quote">Did Eggum ever come out with an actual number? It has to be around 1200.</TD></TR></TABLE>

dunno. i would marry ms stephanie tho, so hott that shes into (understatement of the year) hondas. keep em coming.
820 is pretty massive, what kind of turbo is on there?

BioXide02

GT42r

Dunc

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHCD16y8 &raquo;</TD></TR><TR><TD CLASS="quote">Did Eggum ever come out with an actual number? It has to be around 1200.</TD></TR></TABLE>

DSport Issue 49B (January 2007) page 81 stated 1100whp & 700wtq with the GT42R 74mm turbo on about 50psi


Modified by Dunc at 6:31 PM 1/26/2007

DaveF

our car has had multiple dyno pulls all around 820whp. in the range of 35-38 psi from a 74mm turbo


on another note, there is a thread in drag racing forum somewhere about a 1000 whp dyno...

here it is...

https://honda-tech.com/zerothread?id=1245999&page=1


Modified by dturbocivic at 6:33 PM 1/26/2007

drtysohc

i heard of a guy (not going to mention names because i don't know whether or not he would want me to talk about it) made 680 on 22psi, breaking the tires loose on the dyno at 7500 rpm, and was spinning to 12,000 he trapped 163 on 36 psi and was still spinning at the 1320...and supposedly wasn't running as much boost as he wanted to.

EKB18C97

her car made 1100 hp. it was in this months issue.

tony1

I don't have any problem spinning the tires from 3rd gear on with over 800hp. Nobody is spinning the tires at the finish line and going 163.

Arturbo

B-series GT42R

preludeserge

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zeimbo &raquo;</TD></TR><TR><TD CLASS="quote">lets see it.
hands down, who is putting down the most power in their 4 banger.</TD></TR></TABLE>

Kinda OT. Not exactly B,D,F,H, or K, but it's a "four banger".
http://www.turbomagazine.com/t...tegra/

FactionR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by preludeserge &raquo;</TD></TR><TR><TD CLASS="quote">

Kinda OT. Not exactly B,D,F,H, or K, but it's a "four banger".
http://www.turbomagazine.com/t...tegra/</TD></TR></TABLE>

do you think thats a streetable 4000hp?

non-VTEC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FactionR &raquo;</TD></TR><TR><TD CLASS="quote">

do you think thats a streetable 4000hp?</TD></TR></TABLE>

ya....why not.....the perfect sunday church car

HiProfile

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by non-VTEC &raquo;</TD></TR><TR><TD CLASS="quote">

ya....why not.....the perfect sunday church car </TD></TR></TABLE>

Assuming the church is no more than 1/3 a mile away. And pray you don't have to drive around for a parking spot. Billet block w/o coolant can get hairy at 4000hp and a temps above oil's boiling point.

But what I wouldn't give for a 4.8L dohc in my civic...

preludeserge

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FactionR &raquo;</TD></TR><TR><TD CLASS="quote">

do you think thats a streetable 4000hp?</TD></TR></TABLE>

Who said anything about streetable?

ExospeedAMcrx

That link should be banned from this Forum. haha.

ExospeedAMcrx

Why dont you add:

Arias Pistons
Carrillo Rods
Darton Sleeves

in your best parts list.

nsxmatt

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by preludeserge &raquo;</TD></TR><TR><TD CLASS="quote">Kinda OT. Not exactly B,D,F,H, or K, but it's a "four banger".
http://www.turbomagazine.com/t...tegra/</TD></TR></TABLE>

That's Norwoods "claim". Just like all the cars he built would be driveable, it's just a claim of his.

tony1

For what it's worth, the 4000hp was an estimate of what it should make on nitro, on paper. It never got close, 1800bhp is the most it ever made, on methanol, on an engine dyno. Nothing too spectacular out of a 5 liter motor.

zexxbo

does anyone know the exact parts in stephanie eggums set up? lets see some setups.. if youre cool with it. id like to know exactly what youre using to hold the massive hp numbers..

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">Why dont you add:

Arias Pistons
Carrillo Rods
Darton Sleeves

in your best parts list. </TD></TR></TABLE>

i was just naming a few. i know arias pistons are good as my friend has them in his 724ish whp without hiccups. but just comparing them next to the cp's; i think the cp pistons really stand out. ive also seen a few people with problems from arias pistons, they are really good tho. do you know the power ratings for carillos and darton? i know they are up there tho for sure.

ExospeedAMcrx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zeimbo &raquo;</TD></TR><TR><TD CLASS="quote">does anyone know the exact parts in stephanie eggums set up? lets see some setups.. if youre cool with it. id like to know exactly what youre using to hold the massive hp numbers..

i was just naming a few. i know arias pistons are good as my friend has them in his 724ish whp without hiccups. but just comparing them next to the cp's; i think the cp pistons really stand out. ive also seen a few people with problems from arias pistons, they are really good tho. do you know the power ratings for carillos and darton? i know they are up there tho for sure. </TD></TR></TABLE>

Well as you can see Kenny Tran is on Arias pistons. Ask him how his Arias pistons handle the power.
Also a few of the 2JZ powered Pro-RWD cars were on Arias as far as I know.

Carrillo rods, first of all, the CARR bolts if you compare it to the other bolts used by Manley, Crower, Pauter, are way bigger. They actually tq to 65lbs vs 45lbs on most of those rod bolts that come in those kits.
Darton Sleeves, LS1 motors, Top Fuel cars, alot of the ERL blocks are Darton MIDs. I wouldnt put anything else in our motor that we plan on making over 1000hp with.

Whats your basis on CP pistons that they can withstand that much? I know many of the pistons companies are good and make the power, I really dont believe in saying a certain piston brand is less than the other. Unless you've used All brands at one point and have multiple experience with each, its not really an accurate calculation

nonvtecallmotor

expletive everyone. I made 3whp beat that.

boostedcivicsir

i put 8hp motors on concrete mixers all day, hell i just fixed a 68hp Deutz turbo floor saw the other day he hee.

10secivic

That graph is crazy 160+ mph on the dyno, whos graph is that.