BoostedsiR

I got my maxrev kit in and I know that there is DIY piping kit there is a *** load of pipes that are 90 deg angles but my question is the pipe from the intake manifold to the intercooler shouldn't there be a flange for the BOV or do I just weld it

http://www.maxrev.com/product.esiml?PID=3

just a little confused 94 hb b16a

B18Flip

you'll need to weld it on

hondaswaper

the max rev kit we installed had an aluminum BOV flange , so we put on the intercooler endtank.