Love Fab Mini-Me users please read...
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: usa
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
Love Fab Mini-Me users please read...
Can you please post pics of your intercooler pipes on the hot side? I prefer pics with traction bars if possible. It is a very tight squeeze (99 Civic/B18C) to get by the traction bars w/o going under them.
Also, if you have pics of your oil return please post them. My oil return is almost level if not level. I just wanted to get some ideas of what others have done with there setups.
Sorry, I have no pics of my setup yet.
TIA
Also, if you have pics of your oil return please post them. My oil return is almost level if not level. I just wanted to get some ideas of what others have done with there setups.
Sorry, I have no pics of my setup yet.
TIA
#3
Re: Love Fab Mini-Me users please read... (simike)
i have a mini me and its pretty level. Off the turbo you have to use a 90 degree and kinda play around with the positioning of the turbo and see where you get the most angle at. I have a integra with traction bars, not sure if its different from 99 civic, but if i get the chance ill get some pictures
#4
Honda-Tech Member
Re: Love Fab Mini-Me users please read... (sfwd dc2)
Can you run it straight up then take it down where the washer reservoir sits? That is how I plan on having my piping done.
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: usa
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
Re: Love Fab Mini-Me users please read... (g2turbo)
My intercooler pipes are already finished. I also had to have a 90deg elbow welded to the turbo. I just wanted to see how others did theirs.
My oil return is finished also, but I am not so sure how sensitive the oil returns are. Meaning what is acceptable and how easy it is to blow the seals in the turbo. My previous setup had a good angle into the oil pan so I had no worries about it.
Thanks for any pics you can post. I searched and didn't find any that were still up.
My oil return is finished also, but I am not so sure how sensitive the oil returns are. Meaning what is acceptable and how easy it is to blow the seals in the turbo. My previous setup had a good angle into the oil pan so I had no worries about it.
Thanks for any pics you can post. I searched and didn't find any that were still up.
#6
Honda-Tech Member
Re: Love Fab Mini-Me users please read... (simike)
ill get a pic of my pipes. but there is a big hump right over the traction bars, insted of going up you can run them closer to the block, but it wont work with ac
Thread
Thread Starter
Forum
Replies
Last Post
b18sihatch
Honda CRX / EF Civic (1988 - 1991)
75
04-30-2006 05:19 PM