Lost motion Assemblies
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Sudbury, MA, US
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Lost motion Assemblies
Well, starting to put my head back together and found out I have mixed LMA's. I have 2 pointy tipped LMA's and i have 6 squARE CYLINDER tipped ones. The squarish ones dont go down far if you push them in, but the cone pointy tipped ones go down further and it appears they are slightly taller?!
Wtf?! LMA's @ the dealer are $34 each! No friggin way!
Wtf?! LMA's @ the dealer are $34 each! No friggin way!
#2
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Sudbury, MA, US
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lost motion Assemblies (B18C Turbo)
I have read every single thread on these LMA's and only a couple were helpful. Im thinking about switching to 99-01 prelude LMA's and using the .040" shim underneathe.
I cant find the 1 thread where it was proven disasterous to do this? help.
I cant find the 1 thread where it was proven disasterous to do this? help.
#3
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Sudbury, MA, US
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Ordered 8 of these
14820-PCB-003
So cool how Bernardi honda is 20 minutes from my house but I order online because im too lazy to drive there. Will be picking up the .040" shims tomorrow.
14820-PCB-003
So cool how Bernardi honda is 20 minutes from my house but I order online because im too lazy to drive there. Will be picking up the .040" shims tomorrow.
#5
Honda-Tech Member
Join Date: Sep 2003
Location: miami, fla, us
Posts: 2,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lost motion Assemblies (Ludster)
alot of people use those prelude ones with shims. the style of the lmas changed in the newer motors...gsrs and type rs have the better ones
#6
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Sudbury, MA, US
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lost motion Assemblies (Ludster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ludster »</TD></TR><TR><TD CLASS="quote">I swaped out the old LMA's to the 99 prelude LMA's. 9k miles and it still purrs. </TD></TR></TABLE>
ya but you have a92-96 prelude lol.
I already have them ordered im just worried that with the shim there its going to rattle/vibrate and make noise?
ya but you have a92-96 prelude lol.
I already have them ordered im just worried that with the shim there its going to rattle/vibrate and make noise?
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Sudbury, MA, US
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lost motion Assemblies (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">We ran Prelude LMA's in Xsi-T's B16 head. No problems</TD></TR></TABLE>
#10
Honda-Tech Member
Join Date: Nov 2004
Location: SoCal, CA, USA
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lost motion Assemblies (B18C Turbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C Turbo »</TD></TR><TR><TD CLASS="quote">ya but you have a92-96 prelude lol.
I already have them ordered im just worried that with the shim there its going to rattle/vibrate and make noise?</TD></TR></TABLE>
I daily a b16a
I already have them ordered im just worried that with the shim there its going to rattle/vibrate and make noise?</TD></TR></TABLE>
I daily a b16a
#11
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Sudbury, MA, US
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lost motion Assemblies (non-VTEC)
I got the washers from Home Depot. Stainless steel .040" with a .53" diameter. It fits in the very bottom of the LMA bore.
Thread
Thread Starter
Forum
Replies
Last Post
Prudz_lude
Appearance Build Threads
101
04-07-2015 07:21 PM