Im hoping someone can help me here... Ive been searching for a write up but I cant seem to find it at all today... ive been searching for like 45 mins and cant find it... it was a write up on how to change your fuel lines to the stainless braided lines, fuel rail, fuel filter, and install a FPR... I thought it was in the Forced Induction FAQ but I cant find it at all... If anyone can help me out id appreciate it.


Modified by 94 IntegraLS at 5:35 PM 10/27/2007

 

Or if someone could make a build sheet for me id appreicate it... basically im gonna be using an AEM fuel rail or similar and a Aeromotive fuel filter and FPR... if someone could make a build sheet for what fittings id need for the feed and return... I also want to change out all the rubber hose from the fuel filter with some stainless braided steel lines... Thanks!


Modified by 94 IntegraLS at 7:49 PM 10/27/2007

 

bump... if anyone can help id appreciate it... I found one write up but its not exactly what im looking for... but its something similar to this if it'll help https://honda-tech.com/zerothread?id=577983 the only thing is that on the one im looking for they used an aftermarket fuel filter and fuel rail and I believe the FPR was mounted directly to the fuel rail.