Well I have been planing on doing a custom turbo setup, but before I strat purchessing stuff, particulary fuel mangement I want to find a good tuner In Texas preferable central do you guys have any suggestions?

 

No matter where in Texas you are make the drive to Jotech and talk to Tony or Kenny.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AVATAR &raquo;</TD></TR><TR><TD CLASS="quote">No matter where in Texas you are make the drive to Jotech and talk to Tony or Kenny.</TD></TR></TABLE>

 

Ok and were is that?

 

dallas tx

 

JOTECH #(972)278-9744

 

jotech

 

Give Lawrence Connley a call. He specialises in FAST & DFI. He runs DFI in his 6 second Camero, and has tuned a few people in and around Texas on this board. He charges $75.00 the first hour and $50.00 after that. Very reasonable and very experienced with forced induction!
http://www.conleyracing.com/

 

well dallas is about two, two and a half hours away but they seem to have a good rep!! so it must be worth it huh.

 

I'd go to Jotech just so I could hopefully get lucky and sneak a peak at their Civic. Once I finish my rebuild I plan on taking my car to them to get my hondata retuned.

 

Yeah and see if you can take a peak at Norwoods car too Conly's prices are pretty killer, but I'd trust Jotech just based on their experience over them.
Oh yeah and they are actually in Garland.

 

Tony tunes all the hondata, but I tuned all his FMU cars

stan

 

It's an ART so I hear. . .

 

tony @ Jotech

If I didnt know how to tune a car.. Thats definitely the place I would go.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Flamenco-T &raquo;</TD></TR><TR><TD CLASS="quote">Tony tunes all the hondata, but I tuned all his FMU cars

stan</TD></TR></TABLE>
Bull ****! I tune the FMU there. Dont try to take my job.

 

Can Jotech tickle the keys on a Z-Dyne?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo &raquo;</TD></TR><TR><TD CLASS="quote">
Bull ****! I tune the FMU there. Dont try to take my job.</TD></TR></TABLE>
well, you do all the Vortech, I mean, they make great FMU's..

stan

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by st00pid &raquo;</TD></TR><TR><TD CLASS="quote">
Thats definitely the place I would go.</TD></TR></TABLE>

id go see him ^ (st00pid)

 

any good tuners in the houston area? i'm a good 7 or 8 hours away from dallas and about 1-2 hours away from houston.

 

id go see him ^ (st00pid)

 

st00pid is in Houston area. JoTech is in Garland area. If i was anywhere in the remote area of texas tho, id make the drive to Tony at JoTech.

 

Tony@Jotech if you haven't figured it out yet.

 

id go to lawrence connelly in houston

 

if you cant see from the replys on this board....JOTECH

 

i'd drive down to jotech from toronto if i had to