List your 450+ hp setup's
#1
Thread Starter
Join Date: Nov 2007
Location: Birmingham, AL, USA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
List your 550+ hp DOHC setup's
I'm just letting everyone post their 550+ hp setup's for the community to view because in the Honda world 550hp is a big hurtle for most Honda enthusiast. So post hp on dual cam engines and if you have 1/8 or 1/4 post them also. Thank you
Modified by HYBRDcrx at 7:03 PM 2/11/2008
Modified by HYBRDcrx at 11:26 AM 2/12/2008
Modified by HYBRDcrx at 7:03 PM 2/11/2008
Modified by HYBRDcrx at 11:26 AM 2/12/2008
#2
Honda-Tech Member
Join Date: Oct 2003
Location: Budds Creek, MD, amishtown
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Re: List your 450+ hp setup's (HYBRDcrx)
Lol.. Here ya go..
1990 crx si, 1940 lbs with driver.
d16z6 sohc
ported and polished head
Zex 59300 cam
Crower springs and retainers
STR intake manny
74mm Ericks Racing throttlebody
1000CC injectors
Eagle rods + JE pistons
STOCK SLEEVES
SC61
Rev Hard log
461HP @ 354FT TQ
10.97 @ 131MPH
Modified by Newt Dog at 8:25 PM 2/11/2008
1990 crx si, 1940 lbs with driver.
d16z6 sohc
ported and polished head
Zex 59300 cam
Crower springs and retainers
STR intake manny
74mm Ericks Racing throttlebody
1000CC injectors
Eagle rods + JE pistons
STOCK SLEEVES
SC61
Rev Hard log
461HP @ 354FT TQ
10.97 @ 131MPH
Modified by Newt Dog at 8:25 PM 2/11/2008
#4
Honda-Tech Member
Re: List your 450+ hp setup's (HYBRDcrx)
b18c1
Laskey assembled
pauter rods
cp pistons 84mm (9:1)
benson sleeved
Full-Race stage2GTAC gt3076R .82
To much other stuff to list....
Making 503whp car went 11.3 @ 128 Full interior ac/ps/abs/cruise etc. It has the power to run 10s I just don't have enough seat time.
Laskey assembled
pauter rods
cp pistons 84mm (9:1)
benson sleeved
Full-Race stage2GTAC gt3076R .82
To much other stuff to list....
Making 503whp car went 11.3 @ 128 Full interior ac/ps/abs/cruise etc. It has the power to run 10s I just don't have enough seat time.
#5
Re: List your 450+ hp setup's (sp00led)
b18c1
cp pistons 83mm (9:1)
eagle rods
ge sleeved
super 70 turbo/ramhorn
built head etc.
see sig for numbers
car went 11.0 at 123 blowing the lower piping off a lil after the 1000ft mark
full interior no t-bars or axles daily driven
cp pistons 83mm (9:1)
eagle rods
ge sleeved
super 70 turbo/ramhorn
built head etc.
see sig for numbers
car went 11.0 at 123 blowing the lower piping off a lil after the 1000ft mark
full interior no t-bars or axles daily driven
#6
Re: List your 450+ hp setup's (gisserhatch)
Benson H22a1
87.5mm Weisco
Eagle rods
GT3076 .82 AR
Skunk2 IM
Stock head/cams
520whp 430wtq 21psi 114
480whp 370wtq 17psi 92 pump
90 prelude SI chassis
Track times to come soon
87.5mm Weisco
Eagle rods
GT3076 .82 AR
Skunk2 IM
Stock head/cams
520whp 430wtq 21psi 114
480whp 370wtq 17psi 92 pump
90 prelude SI chassis
Track times to come soon
#7
Honda-Tech Member
iTrader: (5)
Join Date: Jul 2006
Location: houston, tx, US
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
b18c1
stock sleeves
9:1 wesico piston
eagle rods
stock head
FR t3 topmount
gt35r
517whp at 22psi - Q16
tuned by burgermass on eCtune
car went 10.96 at 127 on like 20psi
full interior, no traction bars, stock axles
stock sleeves
9:1 wesico piston
eagle rods
stock head
FR t3 topmount
gt35r
517whp at 22psi - Q16
tuned by burgermass on eCtune
car went 10.96 at 127 on like 20psi
full interior, no traction bars, stock axles
Trending Topics
#12
Thread Starter
Join Date: Nov 2007
Location: Birmingham, AL, USA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
List your 550+ hp DOHC setup's
well i've been out of the honda world for a few years and I'm getting back in so yeah i'm kinda new to the current scene. I'm building a 500-600hp engine and just wanted to see what everyone else is running and to see what setup has been working the best
#13
Man U FTW
Re: List your 550+ hp DOHC setup's (HYBRDcrx)
Well, what the hell....
81.5mm GSR (stock sleeves)
9.8:1 CP pistons
Eagle Rods
SLS Shorty manifold (for now)
Borg Warner S256 .70ar V-band
3" SS DP and exhaust
Tial 38mm
PTE 1000cc injectors
Chipped P28 with Crome
Still in the works, but i'm tuning on E85 and shooting for about 450whp
81.5mm GSR (stock sleeves)
9.8:1 CP pistons
Eagle Rods
SLS Shorty manifold (for now)
Borg Warner S256 .70ar V-band
3" SS DP and exhaust
Tial 38mm
PTE 1000cc injectors
Chipped P28 with Crome
Still in the works, but i'm tuning on E85 and shooting for about 450whp
#14
Honda-Tech Member
Join Date: Oct 2007
Location: pa, us
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Re: List your 450+ hp setup's (sp00led)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sp00led »</TD></TR><TR><TD CLASS="quote">b18c1
Laskey assembled
pauter rods
cp pistons 84mm (9:1)
benson sleeved
Full-Race stage2GTAC gt3076R .82
To much other stuff to list....
Making 503whp car went 11.3 @ 128 Full interior ac/ps/abs/cruise etc. It has the power to run 10s I just don't have enough seat time.</TD></TR></TABLE>
was that 503 on race gas or pump and what psi? i have the same setup
Laskey assembled
pauter rods
cp pistons 84mm (9:1)
benson sleeved
Full-Race stage2GTAC gt3076R .82
To much other stuff to list....
Making 503whp car went 11.3 @ 128 Full interior ac/ps/abs/cruise etc. It has the power to run 10s I just don't have enough seat time.</TD></TR></TABLE>
was that 503 on race gas or pump and what psi? i have the same setup
#15
Honda-Tech Member
Join Date: May 2003
Location: newark/elkton, de/md
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Re: List your 550+ hp DOHC setup's (Schister66)
594Whp/420Wtq Sippin on Some E85izzle 21-22lbs
93 Hatch
B18b
85MM
Darton sleeves
9.1 Cp pistons
Eagle H-Beams
ERL Griddle
HeadGames BUilt head
B16 Head
Ferreea Everyting
ITR Cams
ARP H/S
JG Intake manifold
BBK 70mm t/b
1000cc RC's
Intank Walbro 255 (stock lines)
Full-Race St3 Ram horn T3/67
Thremal 3in
AEM Ems
The rest in my sig
vvv
Modified by g2crx at 9:05 PM 2/12/2008
Modified by g2crx at 9:13 PM 2/12/2008
93 Hatch
B18b
85MM
Darton sleeves
9.1 Cp pistons
Eagle H-Beams
ERL Griddle
HeadGames BUilt head
B16 Head
Ferreea Everyting
ITR Cams
ARP H/S
JG Intake manifold
BBK 70mm t/b
1000cc RC's
Intank Walbro 255 (stock lines)
Full-Race St3 Ram horn T3/67
Thremal 3in
AEM Ems
The rest in my sig
vvv
Modified by g2crx at 9:05 PM 2/12/2008
Modified by g2crx at 9:13 PM 2/12/2008
#16
Honda-Tech Member
Re: List your 550+ hp DOHC setup's (g2crx)
built b16a minor porting
stock b18c1 block with arp bolts
victorx manifold
1000cc
ramhorn manifold
t04e 57trim
c16
455hp
301tq
stock b18c1 block with arp bolts
victorx manifold
1000cc
ramhorn manifold
t04e 57trim
c16
455hp
301tq
#17
GDD's Dr. Phil?
Join Date: Sep 2005
Location: SW Florida / Denver Colorado
Posts: 1,773
Likes: 0
Received 0 Likes
on
0 Posts
Re: List your 450+ hp setup's (B20luda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B20luda »</TD></TR><TR><TD CLASS="quote">Benson H22a1
87.5mm Weisco
Eagle rods
GT3076 .82 AR
Skunk2 IM
Stock head/cams
520whp 430wtq 21psi 114
480whp 370wtq 17psi 92 pump
</TD></TR></TABLE>
H series torque FTMFW!
87.5mm Weisco
Eagle rods
GT3076 .82 AR
Skunk2 IM
Stock head/cams
520whp 430wtq 21psi 114
480whp 370wtq 17psi 92 pump
</TD></TR></TABLE>
H series torque FTMFW!
#18
Re: List your 450+ hp setup's (oneludesol)
b18c fully built by me
set-up
b18c block
b16a2 head
84mm cp's
ls crank
vid on the dyno http://youtube.com/watch?v=ftk6OOMO6MA lol
set-up
b18c block
b16a2 head
84mm cp's
ls crank
vid on the dyno http://youtube.com/watch?v=ftk6OOMO6MA lol
Thread
Thread Starter
Forum
Replies
Last Post
GOIN V8 HUNTIN
Tech / Misc
2
11-08-2005 06:13 PM
B18 CYA
For Sale
6
06-04-2004 07:14 AM
USDM 4G VTEC
Forced Induction
16
02-07-2004 10:21 AM
blackedoutcivic
For Sale
22
07-05-2003 12:16 AM