hiendgsr

Probably a dumb question but my rev hard kit instructions don't say anything about it. On one end we have a + - .... I imagine the - goes to ground and + to ign? or acc? Help me out here. Anybody have a pic of how they mounted their pump?

smurfey002

look on team-integra.net under the articles they show you how to find the correct wire to get it to turn on w/ the ign.

i believe the article was actually posted here before it was there also.

dasher

yeah ... here is the link to my original article...

https://honda-tech.com/zerothread?id=635014

I also posted it in http://www.team-integra.net

good luck..

intekragsr

you need to splice the + into the fuel pump relay located under the dash. Its either a gray or brown box, pin 4 or 7. - to any secure ground.

Make sure it isnt wired backwards. If u do wire it backwards, trust me, you will know, when u turn the ignition on, u will hear a very bad sound.

Make sure to secure it somewhere SECURE, it will vibrate like crazy.