Just thought i'd share
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: 41°39′10″N 72°23′29″W, Connecticut
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
Just thought i'd share
I recently dropped some turbo parts to a buddy of mine to get 2000 degree high temp coated, I am in favor of the nice bling look of a fully polished SS manifold .. but overtime things tend to tarnish. I picked up these parts from another IS300 enthusiast that crashed his car a few weeks back, it need a new home and decided it needed a little makeover...
From this:
Thermal coat ..
Final Coat
Modified by TheWickedOne at 8:47 PM 11/28/2005
Modified by TheWickedOne at 8:52 PM 11/28/2005
From this:
Thermal coat ..
Final Coat
Modified by TheWickedOne at 8:47 PM 11/28/2005
Modified by TheWickedOne at 8:52 PM 11/28/2005
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: 41°39′10″N 72°23′29″W, Connecticut
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just thought i'd share (bnut510)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bnut510 »</TD></TR><TR><TD CLASS="quote">all that for a ssauto mani? LOL </TD></TR></TABLE>
Look again buddy... i believe SSauto has not made any 6 cylinder 2JZGE manifolds yet ...
Look again buddy... i believe SSauto has not made any 6 cylinder 2JZGE manifolds yet ...
#5
Honda-Tech Member
Re: Just thought i'd share (TheWickedOne)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheWickedOne »</TD></TR><TR><TD CLASS="quote">
Look again buddy... i believe SSauto has not made any 6 cylinder 2JZGE manifolds yet ...
</TD></TR></TABLE>
Close enough: Click Here J/K
Phil
Look again buddy... i believe SSauto has not made any 6 cylinder 2JZGE manifolds yet ...
</TD></TR></TABLE>
Close enough: Click Here J/K
Phil
#6
Honda-Tech Member
Join Date: Nov 2003
Location: South Florida
Posts: 3,711
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just thought i'd share (TheWickedOne)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheWickedOne »</TD></TR><TR><TD CLASS="quote">
Look again buddy... i believe SSauto has not made any 6 cylinder 2JZGE manifolds yet ...
</TD></TR></TABLE>
ugh yes the have
Look again buddy... i believe SSauto has not made any 6 cylinder 2JZGE manifolds yet ...
</TD></TR></TABLE>
ugh yes the have
#7
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: 41°39′10″N 72°23′29″W, Connecticut
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Re: Just thought i'd share (hondaguyef)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaguyef »</TD></TR><TR><TD CLASS="quote">
Close enough: Click Here J/K
Phil</TD></TR></TABLE>
hahahaha
Close enough: Click Here J/K
Phil</TD></TR></TABLE>
hahahaha
#10
Honda-Tech Member
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just thought i'd share (TheWickedOne)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bnut510 »</TD></TR><TR><TD CLASS="quote">all that for a ssauto mani? LOL </TD></TR></TABLE>
Gary, they're just busting ur *****
Gary, they're just busting ur *****
#11
all the ssac supra mani's i've seen in person are holding up perfectly fine, and supporting very nice numbers, just so ya know.
a local guy has a 2jzgte swapped into a 2000 tacoma, and his is was doing 680whp daily with no issues...this his panhard bar broke and tore *** on his bed
a local guy has a 2jzgte swapped into a 2000 tacoma, and his is was doing 680whp daily with no issues...this his panhard bar broke and tore *** on his bed
#13
Honda-Tech Member
Re: (m R g S r)
How can you tell its weak and thin metal from the pics?
I think you are full of **** honestly.
FYI look at all the Supra manifolds out there. They are all the same design, so I doubt any of you could tell the difference between them with the pics provided
I think you are full of **** honestly.
FYI look at all the Supra manifolds out there. They are all the same design, so I doubt any of you could tell the difference between them with the pics provided
#14
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: 41°39′10″N 72°23′29″W, Connecticut
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just thought i'd share (Turbocivic94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 »</TD></TR><TR><TD CLASS="quote">
Gary, they're just busting ur ***** </TD></TR></TABLE>
Thats fine .. i find it comical, They are showing a fine display of ignorance and stupidity...
Gary, they're just busting ur ***** </TD></TR></TABLE>
Thats fine .. i find it comical, They are showing a fine display of ignorance and stupidity...
#15
Honda-Tech Member
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just thought i'd share (TheWickedOne)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheWickedOne »</TD></TR><TR><TD CLASS="quote">
Thats fine .. i find it comical, They are showing a fine display of ignorance and stupidity... </TD></TR></TABLE>
Welcome to HT
Thats fine .. i find it comical, They are showing a fine display of ignorance and stupidity... </TD></TR></TABLE>
Welcome to HT
#16
iTrader: (2)
Re: Just thought i'd share (Turbocivic94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheWickedOne »</TD></TR><TR><TD CLASS="quote">
Thats fine .. i find it comical, They are showing a fine display of ignorance and stupidity... </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 »</TD></TR><TR><TD CLASS="quote">
Welcome to HT</TD></TR></TABLE>
Couldn't of said it better myself.
Thats fine .. i find it comical, They are showing a fine display of ignorance and stupidity... </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 »</TD></TR><TR><TD CLASS="quote">
Welcome to HT</TD></TR></TABLE>
Couldn't of said it better myself.
#20
Re: Just thought i'd share (Turbocivic94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 »</TD></TR><TR><TD CLASS="quote">
Gary, they're just busting ur ***** </TD></TR></TABLE>
if i wanted to bust his *****, id take a little mini-me mouse mallet to pound on them. u can see that the quality on that mani is ****... look at how thin it is tho... dont tell me u cant notice that. how much did that coating cost anyways im curious?
Gary, they're just busting ur ***** </TD></TR></TABLE>
if i wanted to bust his *****, id take a little mini-me mouse mallet to pound on them. u can see that the quality on that mani is ****... look at how thin it is tho... dont tell me u cant notice that. how much did that coating cost anyways im curious?
#22
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: 41°39′10″N 72°23′29″W, Connecticut
Posts: 1,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just thought i'd share (bnut510)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bnut510 »</TD></TR><TR><TD CLASS="quote">
if i wanted to bust his *****, id take a little mini-me mouse mallet to pound on them. u can see that the quality on that mani is ****... look at how thin it is tho... dont tell me u cant notice that. how much did that coating cost anyways im curious? </TD></TR></TABLE>
Show some class man ... The reason to start this thread was to show folks, how much of an improvement it makes on parts that need a little TLC.
And what if it is a SSAC mani, (which it isn't) .. Who cares if it was ..
if i wanted to bust his *****, id take a little mini-me mouse mallet to pound on them. u can see that the quality on that mani is ****... look at how thin it is tho... dont tell me u cant notice that. how much did that coating cost anyways im curious? </TD></TR></TABLE>
Show some class man ... The reason to start this thread was to show folks, how much of an improvement it makes on parts that need a little TLC.
And what if it is a SSAC mani, (which it isn't) .. Who cares if it was ..
#23
Junior Member
Join Date: Aug 2003
Location: some were in, mi, united states
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just thought i'd share (TheWickedOne)
looks sweet. i might be having that done soon on my rb25
thats not an SSAC BTW. all the ssac manifolds the runners are one piece without welds in the middles or whatnot. this one uses different pieces of on each runner
thats not an SSAC BTW. all the ssac manifolds the runners are one piece without welds in the middles or whatnot. this one uses different pieces of on each runner
#25
Re: Just thought i'd share (TheWickedOne)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheWickedOne »</TD></TR><TR><TD CLASS="quote">
Show some class man ... The reason to start this thread was to show folks, how much of an improvement it makes on parts that need a little TLC.
And what if it is a SSAC mani, (which it isn't) .. Who cares if it was .. </TD></TR></TABLE>
what kinda class u want me to show u on h-t? i was just messin around... yehh if its ssac, yehh im talkin **** cuz i dont like the guy or his products... did i say anything negative about him? someone was sayin i was bustin *****... soo calm down buddy before i bust your nuts to
Show some class man ... The reason to start this thread was to show folks, how much of an improvement it makes on parts that need a little TLC.
And what if it is a SSAC mani, (which it isn't) .. Who cares if it was .. </TD></TR></TABLE>
what kinda class u want me to show u on h-t? i was just messin around... yehh if its ssac, yehh im talkin **** cuz i dont like the guy or his products... did i say anything negative about him? someone was sayin i was bustin *****... soo calm down buddy before i bust your nuts to