I was so pleased about the last batch of GT30Rs that I had configured, I thought I'd just share to the community (Thanks Pete..). One is STC's for the New Evo project, the other is a customer's Turbo that will soon be shipped after final assembly this week.




Customer Zach.....



Speaking of Ceramic and powder coating, we're now starting to do Valve covers.

Ceramic Silver (Test) I hand painted the blue with an acrylic paint, so we'll see how long it lasts.



Silver flake base coat (again hand painted letters)



Even the Wrinkle coats are now being done. This one below is a TEST prototype for my wife's EM1


Notice the "moon" cut


This last one was hard to do on the lettering because it is 2 layered.


Comments, please? I may consider this as an addition to the line.

 

The turbo's and blue wrinkle coating looks good!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 11psiTurboSI &raquo;</TD></TR><TR><TD CLASS="quote">The turbo's and blue wrinkle coating looks good!</TD></TR></TABLE>
yeah looks really good.

 

how much is a ceramic coating for a manifold, turbine housing, and downpipe? And possibly a compressor housing?

 

and your semi close to me if i ever need anything

 

wrinkle coat looks excellent!

 

Nice. I hope to use your services very soon. That valve cover came out perfect.

 

You could have posted a picture of that part you coated for me early this week I doubt many of the new people here have seen it done.

 

Nice Mac, can you give us a list of the color options that you will offer? I am interested in the valve cover coating....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 &raquo;</TD></TR><TR><TD CLASS="quote">Nice Mac, can you give us a list of the color options that you will offer? I am interested in the valve cover coating....</TD></TR></TABLE>

Well. For the wrinkle coats right now I only have the HOnda Wrinkle blue, Type R Red, and Black. I'm working on getting some other wrinkle colors.

As for the others. I have over 3000 to choose from. They can either use Clear coat or not.

You must send your valve cover, $100, and I'm working on some faster turnaround times, so make sure that you have some other valve cover to use in the meantime.

The Lettering on the valvecovers is a little extra, because otherwise the coat WILL cover the whole thing. What I've done is use a small sander to file the powder coat off of the VTEC lettering.


Modified by TheShodan at 8:40 PM 10/9/2005

 

Great.... you can expect my valve cover this winter....

 

How much to coat a Edelbrock Victor X intake manifold?

 

I have had TheShodan coat a couple things for me thus far. I will continue to have TheShodan do my coatings Here is a TiAL 44mm that came in from coating today.





TheShodan. Check your PM's in a couple minutes.

 

Wow. looks nice.

 

looks great mac

ill be in touch..i think i may have you coat some stuff over the winter for me

 

God damn that looks good.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kowalski &raquo;</TD></TR><TR><TD CLASS="quote">God damn that looks good.</TD></TR></TABLE>

Functional too

 

nice work will be sending my valve 2 ya soon

 

Can't really see too well, but I think I like the third one down. A little gunmetal type action?

 

damn i like that valve cover job. how much?! hahaha. you do moon cutting too?

 

wow. looks great.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stealthmode62 &raquo;</TD></TR><TR><TD CLASS="quote"> Can't really see too well, but I think I like the third one down. A little gunmetal type action?

</TD></TR></TABLE>

Yes. That is a Gunmetal that I have available as well. I also have a lighter Black chrome that is used. I even have florescent (sp?) colors. As for the wrinkle coats, I can start doing Spoon wrinkle yellow, Jun (Green/yellow), and several others if the demand is right.