onePOINTsix

Ok, i have 2 sets of RX7 injectors, both are out of the older style non-turbo RX7s, both have Red Tops with Denso on one side and 195500-1350 on the other, 2 of them have Gray plugs with the notch in the center, the other 2 have Red plugs with a offset notch. My question is are these low or high impedance injectors and what is their flow rating. Ran a search and only found out about the top color and not the plugs, any hlp would be awsome

onePOINTsix

TTT, only 1 hour 15 minuites till it's X-Mas!!


Modified by Sideout at 12:50 AM 12/25/2003

99blackcivicSi

Are they off of a 12a or 13b? and what year RX7 would be helpful also

Del_Slowest

VEHICLE Injector Types Flow Rate
1988-91 Civic si/crx si Peak and hold 240cc
1992-95 Civic si/ex Saturated 240cc
1996-00 Civic Saturated 240cc
1990-91 Integra Peak and hold 240cc
1992-00 Integra ls/gsr/type R Saturated 240cc
1992-96 Prelude non-vtec Peak and hold 240cc
1992-96 Prelude VTEC Peak and hold 345cc
1997-up Prelude VTEC Saturated 280cc
1991-up Sentra se-r/200sx se-r Saturated 265cc
1991-up MR2 Turbo Peak and hold 440cc
1988-91 Supra Turbo Peak and hold 550cc
1993-up Supra non -Turbo Saturated 315cc
1993-up Supra Twin Turbo Peak and hold 550cc
2000-up Celica GT-S Saturated 310cc
1990-up Miata 1.6 liter Saturated 215cc
1993-up Miata 1.8 liter Saturated 240cc
1993-up RX-7 Twin Turbo Saturated 550cc/850cc
1990-96 300zx Twin Turbo Saturated 370cc
1991-up 3000GT VR-4 Peak and hold 350cc
1989-up Eclipse Turbo Peak and hold 450cc