Inducer question gt4294

Reply Subscribe

Thread Tools

Search this Thread

Apr 12, 2007 | 07:34 AM

fmfkid250

Thread Starter

Honda-Tech Member

Joined: Nov 2002

Posts: 2,303

Likes: 0

From: "It's Miley" Pittsburgh, PA

Inducer question gt4294

Can I somehow reduce my inducer size to 67.8 on my garrett gt4294. its a non-BB turbo Can i put a 4094 wheel on it with a sleeve? or get my wheel trimed

Apr 12, 2007 | 08:52 AM

Importrev

Junior Member

Joined: Dec 2006

Posts: 102

Likes: 0

From: USA

Re: Inducer question gt4294 (fmfkid250)

You could sleeve it, but the radius of the wheel would be off I would think when using a smaller wheel in the bigger cover.

Apr 13, 2007 | 03:04 PM

fmfkid250

Thread Starter

Honda-Tech Member

Joined: Nov 2002

Posts: 2,303

Likes: 0

From: "It's Miley" Pittsburgh, PA

Any other Advice?

Apr 16, 2007 | 09:42 AM

Importrev

Junior Member

Joined: Dec 2006

Posts: 102

Likes: 0

From: USA

Re: (fmfkid250)

Just have an inlet sleeve made up to the wheel, then the wheel can stay the same.

Apr 23, 2007 | 06:13 PM

fmfkid250

Thread Starter

Honda-Tech Member

Joined: Nov 2002

Posts: 2,303

Likes: 0

From: "It's Miley" Pittsburgh, PA

would this be legal?

Apr 23, 2007 | 06:29 PM

tokesGTR

Honda-Tech Member

Joined: Dec 2004

Posts: 786

Likes: 0

From: Canada

Re: (fmfkid250)

Read the rules out to us. In some racing classes they have specifically banned inlet reducers and state the wheel itself must be xx.xx mm in diameter.