Greddy intercooler : type 31 or type 24 ?
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Paris, France
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Greddy intercooler : type 31 or type 24 ?
Finally, I can't afford for a homemade kit, so I'll start from a greddy kit. My goal is D16 + greddy kit@10 PSI on VAFC hack.
I also need a very efficient intercooler.
Type 31 is cheaper than type 24 but do I need a type 24 for "only" 10 PSI ?
For the same setup, does the type 24 give me some more ?
Thx in advance...
I also need a very efficient intercooler.
Type 31 is cheaper than type 24 but do I need a type 24 for "only" 10 PSI ?
For the same setup, does the type 24 give me some more ?
Thx in advance...
#2
Honda-Tech Member
Join Date: Nov 2002
Location: Botswana
Posts: 3,365
Likes: 0
Received 0 Likes
on
0 Posts
Re: Greddy intercooler : type 31 or type 24 ? (spark)
wha? If you piece it together correctly, a homemade kit will be cheaper than GReddy. and the Type 31 should suit your needs fine.
#3
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Paris, France
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Yes in US...
1-There is to much work to make manifold, turbo, wg, bov, ic & downpipe fit together, I'm can't do the welding, I have to pay for : it's too much money and it won't reach the quality of some setup I have seen here.
2-Injectors, APEXI, Turbo, BOV, WG are very expensive in here when adding port.
3-Since I'm not sure of a place to fine tune it, it won't be reliable.
So I preffer have a bolt on kit. (even modifying it later...). But I really would love to have a getho setup (i would have been prouder).
1-There is to much work to make manifold, turbo, wg, bov, ic & downpipe fit together, I'm can't do the welding, I have to pay for : it's too much money and it won't reach the quality of some setup I have seen here.
2-Injectors, APEXI, Turbo, BOV, WG are very expensive in here when adding port.
3-Since I'm not sure of a place to fine tune it, it won't be reliable.
So I preffer have a bolt on kit. (even modifying it later...). But I really would love to have a getho setup (i would have been prouder).
Thread
Thread Starter
Forum
Replies
Last Post
90crxzc
Forced Induction
9
05-30-2002 06:26 AM
crxnug
Forced Induction
8
02-18-2002 10:52 PM