good price??
#1
Junior Member
Thread Starter
Join Date: Jul 2003
Location: bell, oh, us
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
good price??
I am trying to get my ls block rebuilt with, eagle rods, srp pistons, acl bearings. The shop I went to wants like 1000 to do that. The short block was taken apart(completely) before I brought it in to save some time. What is the average price to do something like that. pistons and rods I brought in....he told me I needed bore n hone, decked, pressure tested(or something like that), then assembly.
#2
Re: good price?? (fiftee_su)
Sounds like a scam to me
Earl will do a bore/hone/hottank for a very reasonable price. PM him for details. And odds are, you won't need the block to be decked.
I'd say the price should be closer to $600 for the work + assembly. Don't forget you'll also need a new oil pump.
Earl will do a bore/hone/hottank for a very reasonable price. PM him for details. And odds are, you won't need the block to be decked.
I'd say the price should be closer to $600 for the work + assembly. Don't forget you'll also need a new oil pump.
Thread
Thread Starter
Forum
Replies
Last Post
JICsube
Forced Induction
10
01-23-2003 12:20 PM
ExospeedAMcrx
Classifieds: Forced Induction
3
01-08-2003 03:58 PM