Going to the highest bidder...
Thread Starter
Honda-Tech Member
Joined: Sep 2001
Posts: 4,121
Likes: 0
From: in the LEAVES, USA
Going to the highest bidder...
Someone BUY this, this is all that is left. I want to get it out of my garage and bring something new in 
Buy it before it goes to eBAY.
Make offers, it will go to the highest bidder (reserve set) (reasonable offers only).
----------------------------------------------------------------
B18B Block - Sleeved by GEM - Bored to 84mm - Crank
JE Pistons - 84mm - 10:1 - Block honed to pistons
NON-VTEC Water Pump
OEM Gaskets, O-Rings, Timing Belt, Injector Seals, Etc.
Cometic 84mm HP HeadGasket
VTEC Oil Pump
ONE Tube of HondaBond
TWO OEM Honda Oil Filters
----------------------------------------------------------------
Thanks for the space Dustin
[Modified by 2K_TEG, 1:14 PM 10/6/2002]
Buy it before it goes to eBAY.
Make offers, it will go to the highest bidder (reserve set) (reasonable offers only).
----------------------------------------------------------------
B18B Block - Sleeved by GEM - Bored to 84mm - Crank
JE Pistons - 84mm - 10:1 - Block honed to pistons
NON-VTEC Water Pump
OEM Gaskets, O-Rings, Timing Belt, Injector Seals, Etc.
Cometic 84mm HP HeadGasket
VTEC Oil Pump
ONE Tube of HondaBond
TWO OEM Honda Oil Filters
----------------------------------------------------------------
Thanks for the space Dustin
[Modified by 2K_TEG, 1:14 PM 10/6/2002]
Thread Starter
Honda-Tech Member
Joined: Sep 2001
Posts: 4,121
Likes: 0
From: in the LEAVES, USA
Re: Going to the highest bidder... (Doodoo)
Damnit!! Just what I need too... Right when I have no 'serious' money to throw around. 
Trending Topics
TTT
Honda-Tech Member
Joined: Dec 2001
Posts: 7,139
Likes: 0
From: The Swamp, FL
Re: Going to the highest bidder... (SuperTeg95)
2k_Teg will hook you up with some kick *** GE rods for cheap, i believe like 300. As for the head, you can use a stock b18b head. Any other questions can be directed to me or Kyle (2K_Teg)
Thread Starter
Honda-Tech Member
Joined: Sep 2001
Posts: 4,121
Likes: 0
From: in the LEAVES, USA
Re: Going to the highest bidder... (Mase)
2k_Teg will hook you up with some kick *** GE rods for cheap, i believe like 300. As for the head, you can use a stock b18b head. Any other questions can be directed to me or Kyle (2K_Teg)
I have too much to do with getting you guys turbo kits.I can get whoever buys this block some eagle rods for real cheap. Not, GE...I don't know what he was thinking.
The 10:1 compression is with a B20 head.
Honda-Tech Member
Joined: Dec 2001
Posts: 7,139
Likes: 0
From: The Swamp, FL
Re: Going to the highest bidder... (2K_TEG)
I can get whoever buys this block some eagle rods for real cheap. Not, GE...I don't know what he was thinking.
HAHA ill tell you what i was thinking........I was thinking, I was trying to hurry up and get off the damn computer so i can go ride my bike in the cold *** weather and toast me some single conversion supras tonight, hehehe (well I did beat all 3 of them, hehe to 160 anyways....my top speed, then they toast me)
Sorry guys, EAGLE RODS
on me
Honda-Tech Member
Joined: Oct 2002
Posts: 715
Likes: 0
From: Spartanburg, sc, us
Re: Going to the highest bidder... (Mase)
I ask because I was thinking about buying it, but I have a gsr head and I just wanted to to what my CR would be with those pistons. I also thought the block was already assembled.
Thread Starter
Honda-Tech Member
Joined: Sep 2001
Posts: 4,121
Likes: 0
From: in the LEAVES, USA
Re: Going to the highest bidder... (Mase)
of them, hehe to 160 anyways....my top speed, then they toast me)
Thread Starter
Honda-Tech Member
Joined: Sep 2001
Posts: 4,121
Likes: 0
From: in the LEAVES, USA
Re: Going to the highest bidder... (SuperTeg95)
I ask because I was thinking about buying it, but I have a gsr head and I just wanted to to what my CR would be with those pistons. I also thought the block was already assembled.
