Ive currently got an ls/vtec setup and have decided to turbo it!, now for the past year i was building it upon a powerful N/A beast and put down 194whp and 133ft. lbs. tq.....here is my current setup.....

b16 head ported polished/ 3 angle valve job
head milled .10 thou
ITR intake manifold
aem fuel rail/pressure regulator
aem c.a.i.
aem cam gears
310cc injectors(may need to change)
holley fuel pump
srp 10.5:1 pistons (is this too high?)
eagle rods
z10 crank girdle
skunk2 stage 2 cams (could be a problem?)
skunk2 valvetrain
thermal exhaust (selling)
airmass header (selling)
hondata stage 2 ems

i think thats it, now i know i may have to go bigger on the injectors, i want to run atleast 9-10psi to start and eventually sleeve the block and go higher but for now if you have any suggestions as to what to add or replace please let me know.

thanks
gen2teg




[Modified by GEN2TEG, 5:01 PM 10/24/2002]