FMU???????
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: NC
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
FMU???????
does it matter if my fmu is made by paxton???? my friend bought a supercharger kit from paxton i think and i might buy it its a 12:1 should i or should i buy a vortech???
and do i have to use a inline fuel pump to run a fmu or is a 255 walboro good too im only gonna run 5 to 7 psi till i get a new ecu and gett it tuned????
and do i have to use a inline fuel pump to run a fmu or is a 255 walboro good too im only gonna run 5 to 7 psi till i get a new ecu and gett it tuned????
#2
Honda-Tech Member
Join Date: May 2005
Location: Sun Prairie, WI, USA
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
Re: FMU??????? (Hazymix)
don't run the fmu, for the price of a fmu you can add a little more and get your ecu chipped with at least a basemap until you get it tuned. go with a walbro 255. you might want to invest in a new clutch too if you haven't already. factory clutch will not last.
#3
Junior Member
Thread Starter
Join Date: Mar 2006
Location: NC
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Re: FMU??????? (teddy_dc2)
well i have an obd 2 ls swap its a 96. so i still have to buy an ecu and a conversion harness? im buing an fmu from a coworker of mine he had it from his supercharger kit he want only 70. so imma go wit that till i can get a ecu and save up some cash to go to jeff evans for neptune.
#4
Honda-Tech Member
Join Date: May 2005
Location: Sun Prairie, WI, USA
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
as a last resort i would have to agree with the fmu, but $70 i would say is too much, i recently sold my 12:1 blox for $40 shipped. also you can get your ecu chipped for about $75 @ xenocron.com, but then that means converting to obd1. you can prob find a cheap fmu on homemadeturbo.com, but good luck on your decision.
Thread
Thread Starter
Forum
Replies
Last Post
Andrew 825SM
Forced Induction
2
02-28-2002 02:01 AM