Finally some pics of my setup
I have a 99 civic ex w/ fully built gsr w/ the following set up:
83mm CP Pistons 9:1 cr w/ Pauter Rods
Darton M.I.D. sleeve kit
Gsr crank
Gsr head w/ 01 Type R cams
Skunk2 valve springs & Retainers
Ferrera Valves .5mm oversized
Jg Elderbrock IM w/ Str 68mm TB
Custom Polished STr cams gears and fuel rail(by NRG)
Gsr tranny w/ Quaife Diff
Act Prolite Flywheel w/ Act 6-puck
Here is some pics (better pics up soon)finally figured out how to post the pics







[IMGhttp://www.we-todd-did-racing.com/wetoddimage.wtdr/wMzU2Nzk5NnM0MTNkZmQzMXk1NDE%3D.jpg][/IMG]


my old set up: (stock b18c1 w/ sc44)

Modified by 1fastgsrturbo at 3:16 AM 4/17/2004
83mm CP Pistons 9:1 cr w/ Pauter Rods
Darton M.I.D. sleeve kit
Gsr crank
Gsr head w/ 01 Type R cams
Skunk2 valve springs & Retainers
Ferrera Valves .5mm oversized
Jg Elderbrock IM w/ Str 68mm TB
Custom Polished STr cams gears and fuel rail(by NRG)
Gsr tranny w/ Quaife Diff
Act Prolite Flywheel w/ Act 6-puck
Here is some pics (better pics up soon)finally figured out how to post the pics







[IMGhttp://www.we-todd-did-racing.com/wetoddimage.wtdr/wMzU2Nzk5NnM0MTNkZmQzMXk1NDE%3D.jpg][/IMG]


my old set up: (stock b18c1 w/ sc44)

Modified by 1fastgsrturbo at 3:16 AM 4/17/2004
i wanted to put the pics in the actual post but putting the link was all i could figure out
My turbo set up is going to be ( waiting for turbo and manifold):
Full-Race t3/t67
Full Race manifold
Tial 40mm wastegate and Tial 50mm BOV
Custom 2.5 inch piping
Precision 750hp Intercooler
Hondata s100b w/ Precision 880cc injectors
(Tuning will be done by NRG Tech in L.I., NY)
My turbo set up is going to be ( waiting for turbo and manifold):
Full-Race t3/t67
Full Race manifold
Tial 40mm wastegate and Tial 50mm BOV
Custom 2.5 inch piping
Precision 750hp Intercooler
Hondata s100b w/ Precision 880cc injectors
(Tuning will be done by NRG Tech in L.I., NY)
Thanks guys on the
. MY goals are what ever should get me on the fastest fwd in the country list.
But as far as hp, I have seen similar set ups make 500 whp under 20psi w/ about 350tq. If i can pull that off I will be more than happy. I have had tons of problems with this new build up just from improper installations to defective parts. I really just want a realiable (fast) 10sec street car that gets good gas mileage (when not boosting). If i can complete all of those goals then all the head aches and problems would have been worth it. Oh yeah plus I better hit those goals b/c I have dropped a whole lotta money.
. MY goals are what ever should get me on the fastest fwd in the country list.
But as far as hp, I have seen similar set ups make 500 whp under 20psi w/ about 350tq. If i can pull that off I will be more than happy. I have had tons of problems with this new build up just from improper installations to defective parts. I really just want a realiable (fast) 10sec street car that gets good gas mileage (when not boosting). If i can complete all of those goals then all the head aches and problems would have been worth it. Oh yeah plus I better hit those goals b/c I have dropped a whole lotta money.
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GLHS895 »</TD></TR><TR><TD CLASS="quote">extra points for the orange paint
</TD></TR></TABLE>
heh...
</TD></TR></TABLE>heh...
oh snap the orange block crew!
looks good man!
i was going to do the same thing with my valve cover but fade it to white instead of black..... great minds think alike perhaps?
i was thinking of white and orange stripes instead...
dope setup
looks good man!
i was going to do the same thing with my valve cover but fade it to white instead of black..... great minds think alike perhaps?
i was thinking of white and orange stripes instead...
dope setup
Thread
Thread Starter
Forum
Replies
Last Post
1.9crxNA
All Motor / Naturally Aspirated
5
Jan 20, 2007 01:11 PM
Brewer
All Motor / Naturally Aspirated
135
Oct 20, 2005 08:26 PM



