A few teasers of what's to come...
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: Italy
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
A few teasers of what's to come...
The FedEx man has been very nice to me over the last few weeks. I would have liked to have my manifold by now, but I told Tinker to take his time since I won't be ready for a couple more months anyway. Anyway, the decided stuff is as follows:
B16a2
Lovefab SST
Precision SC61
Tial 38mm WG
Tial BOV
Precision "600hp" Intercooler
Precision Injectors (680cc? Goal is 15psi)
That's the basics of what I am heading towards. I already have the above listed, ordering the Intercooler in a couple hours, and Injectors are two weeks away. I'm still open for suggestions. Anyway, heres a few snaps for all you SC61 fans.
And it's all going into this POS...
I would like to give a BIG Thanks to Arturbo, Ben @ ImportParts.com, Tinker at Lovefab, Jason a.k.a. HulkHB for helping me learn my boost ways, and ImportHatch for all his help with both cars that I've had. Also I encourage everyone that has a few dollars laying around to donate to Vapor Trail's fund. You can see his thread here: https://honda-tech.com/zerothread?id=687941
Thanks for looking, and suggestions are welcome.
Modified by Unsung EM1 at 4:20 PM 11/25/2003
B16a2
Lovefab SST
Precision SC61
Tial 38mm WG
Tial BOV
Precision "600hp" Intercooler
Precision Injectors (680cc? Goal is 15psi)
That's the basics of what I am heading towards. I already have the above listed, ordering the Intercooler in a couple hours, and Injectors are two weeks away. I'm still open for suggestions. Anyway, heres a few snaps for all you SC61 fans.
And it's all going into this POS...
I would like to give a BIG Thanks to Arturbo, Ben @ ImportParts.com, Tinker at Lovefab, Jason a.k.a. HulkHB for helping me learn my boost ways, and ImportHatch for all his help with both cars that I've had. Also I encourage everyone that has a few dollars laying around to donate to Vapor Trail's fund. You can see his thread here: https://honda-tech.com/zerothread?id=687941
Thanks for looking, and suggestions are welcome.
Modified by Unsung EM1 at 4:20 PM 11/25/2003
#4
Banned
Join Date: Jan 2003
Location: Hypocrisy Capital of the World, New York
Posts: 3,983
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (Unsung EM1)
Damnit man, now I'm gunna go through withdrawl until mine gets here in a couple weeks....
#7
Join Date: Sep 2002
Location: Your really lame if you dock my points, WA, 98033
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (Unsung EM1)
is your b16a2 stock. as far as the block. how much boost can it handle safely. i think the 680cc injectors are a good idea if your gonna be boosting that high
Trending Topics
#9
Junior Member
Thread Starter
Join Date: May 2002
Location: Italy
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (Jumpmann23)
Stock block I'll be boosting 7psi. After it's built I'll bump it up to 15psi or more. We shall see how power hungry I get. Thanks for the replies. See you tomorrow Luke.
#13
Join Date: Apr 2001
Location: Northwest Tri Cities Kennewick, WA, USA
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (jerseykid609)
that's quite a turbo if you only plan for 15 psi, in fact it is straight up TOO much TURBO for 15 psi. But whatever floats your boat I guess. Car looks great
#14
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (Mpir3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mpir3 »</TD></TR><TR><TD CLASS="quote">Get ready for some lag </TD></TR></TABLE>
lag means traction
lag means traction
#15
Junior Member
Thread Starter
Join Date: May 2002
Location: Italy
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (Hondaddict)
Just curious why you say it's too much turbo? It puts down amazing numbers even at low boost. Sure, it doesn't get into its max efficiency range until later PSI numbers, but it still works great on low boost. Look up the numbers it puts down, tons of satisfied people.
Cody.... Nah, pics weren't in the trunk. They were taken on a "The North Face" fleece blanket that i tacked against my wall, LOL.
Cody.... Nah, pics weren't in the trunk. They were taken on a "The North Face" fleece blanket that i tacked against my wall, LOL.
#17
Re: A few teasers of what's to come... (Unsung EM1)
DAMN, looks really good Jake. Cant wait to line up with you at the track
And again just look at those quality pics, were gona have to hook up this week and take some pics of some manifolds
And again just look at those quality pics, were gona have to hook up this week and take some pics of some manifolds
#18
Honda-Tech Member
Join Date: Jan 2002
Location: WA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (hulkhb)
Looks good Jake. Cant wait to help on the install. I guess you finally got talked into going boosted... Finish it up man, cant wait to see it.
Yager-
Yager-
#21
Re: A few teasers of what's to come... (Tinker219)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tinker219 »</TD></TR><TR><TD CLASS="quote">looks good man Am I correct in guessing that the turbo was in the trunk when you snapped the photos? </TD></TR></TABLE>
Either that or he's got the same carpet in his house
Either that or he's got the same carpet in his house
#22
Guest
Posts: n/a
Re: A few teasers of what's to come... (Unsung EM1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Unsung EM1 »</TD></TR><TR><TD CLASS="quote">Just curious why you say it's too much turbo? It puts down amazing numbers even at low boost. Sure, it doesn't get into its max efficiency range until later PSI numbers, but it still works great on low boost. Look up the numbers it puts down, tons of satisfied people.
Cody.... Nah, pics weren't in the trunk. They were taken on a "The North Face" fleece blanket that i tacked against my wall, LOL. </TD></TR></TABLE>
It puts down very nice numbers, yes, but peak numbers don't tell teh whole story...Im building my b16a this winter and everyday go back and forth between the sc61 and something smaller, I only want 425whp and im sure i could do it with a smaller turbo with less lag, although it would be alot easier with the sc61...hell sometimes i can't stand the lag of my t3/t04e 60 trim .63ar garrett and im right in its efficency range @ 1 bar...how much power do you want all said and done?
Cody.... Nah, pics weren't in the trunk. They were taken on a "The North Face" fleece blanket that i tacked against my wall, LOL. </TD></TR></TABLE>
It puts down very nice numbers, yes, but peak numbers don't tell teh whole story...Im building my b16a this winter and everyday go back and forth between the sc61 and something smaller, I only want 425whp and im sure i could do it with a smaller turbo with less lag, although it would be alot easier with the sc61...hell sometimes i can't stand the lag of my t3/t04e 60 trim .63ar garrett and im right in its efficency range @ 1 bar...how much power do you want all said and done?
#23
Junior Member
Thread Starter
Join Date: May 2002
Location: Italy
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Re: A few teasers of what's to come... (Mpir3)
How much power? I'm not sure yet.... It won't be a daily driver, so I wouldn't mind putting down over 400whp.
#24
Honda-Tech Member
ur not putting down over 400 on a stock engine
not to hate...
but yo, nice stuff you got!
should be a very potent setup!
how much boost do you think you'll run? and wut kind of engine management?
sory if these qs were answered before, i didnt really wnat to read thru this whole page
not to hate...
but yo, nice stuff you got!
should be a very potent setup!
how much boost do you think you'll run? and wut kind of engine management?
sory if these qs were answered before, i didnt really wnat to read thru this whole page
#25
Junior Member
Thread Starter
Join Date: May 2002
Location: Italy
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tad)
Yeah I know i'm not going to put down 400 on stock block. Since you didn't read, I'll be doing 7psi on stock block, then 15psi or more once it's built. EMS i'm still undecided.
Thread
Thread Starter
Forum
Replies
Last Post
HickamHatch
Texas -OK -LA (Sales)
17
11-16-2008 11:55 AM
JdMhEaD
Classifieds: Forced Induction
9
02-07-2008 06:24 PM
guymosiris
Classifieds: Forced Induction
3
11-30-2003 09:07 PM