<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExploitedRacing &raquo;</TD></TR><TR><TD CLASS="quote">O yea... not to mention the T3 flange is a $22.50 flange, that he got for FREE for his wait.

</TD></TR></TABLE>

I liked that you offered compensation for my time since I had to give my customer a free ceramic coating for HIS wait.. You promised 2 stainless but I got 1 mild T3 flange though. I'm not going to go over all the other times you lied since it's clearly posted above. Customer service is virtually free, bad reputaions cost you big time. I told you that if you fucked around with me anymore I would post this. Don't act surprised.

 

its acually 304 stainless steel T3 flange, if you would another, i have them instock now.

 

Maybe it is stainless. I don't know how to tell. It looks exactly like the mild DSM one. No i don't want another one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExploitedRacing &raquo;</TD></TR><TR><TD CLASS="quote">...i personally dont make all the flanges myself, I have a newer employee on the mill and if here and there a flange gets out looking like that tell me, i have no problem replacing it with a "good" one for free.
</TD></TR></TABLE>

It's really best to just not make more excuses and try to make things right again.

The customer usually doesn't give a **** about how you are running your operations and giving an excuse like this doesn't make up for poor quality. It's your responsibility to run a good business, not the consumer's responsibility to alert you of poor quality.

 

EJ1, thats a good point, but if you didnt read all the posts bail even mentioned that this wasnt about the flange quality and that he already used it.

I was just informing any potential customers that if some how a flange that wasnt of A+ quality got to them to let me know and i would replace it for free. I wasnt trying to point fingers. Although usually knowing the situation a little better helps lighten the mood.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExploitedRacing &raquo;</TD></TR><TR><TD CLASS="quote">EJ1, thats a good point, but if you didnt read all the posts bail even mentioned that this wasnt about the flange quality and that he already used it.

</TD></TR></TABLE>

This is true, but you would think that after dicking around with him for a month you would make sure that the product he ordered was absolutely perfect.

My favorite part of this whole situation was how instead of tracking down this order and making good on it, you were busy trolling honda tech for new customers.

Here is a good way to get customers:

Bailhatch "Hey I just ordered from Exploited and I got my flanges so damn fast it was crazy. They were perfect and Brian was a no bullshit guy. "

You dropped the ball man.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by snoochtodanooch &raquo;</TD></TR><TR><TD CLASS="quote">i am sorry, but i am getting a little sick of ordering performance stuff anymore. 90% of these companies do a terrible job and i am forced to put up with it on a dailey basis, and i have had enough. Even the big guns have let me down, titanmotorsports and others. PLus, if your running a business where you are fabricating parts, you don't run out of material, period. thats just absurd. </TD></TR></TABLE>

I TOTALLY agree guy... no doubt!!!!

 

I'll never buy from this place

Thanks for the heads up, i'll pass the word around.

 

bmc website is hardly worked on... how can we trust him either...... dang kind of hard to choose which place

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsvtecpower &raquo;</TD></TR><TR><TD CLASS="quote">bmc website is hardly worked on... how can we trust him either...... dang kind of hard to choose which place </TD></TR></TABLE>

from the sounds of him though, he's actually busy providing paid for parts to his customers. he may not have time to keep up a website. my .02

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fknslmd &raquo;</TD></TR><TR><TD CLASS="quote">

from the sounds of him though, he's actually busy providing paid for parts to his customers. he may not have time to keep up a website. my .02</TD></TR></TABLE>

exactly. I could care less what the website looks like, It's the parts, price and service I care about.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch &raquo;</TD></TR><TR><TD CLASS="quote">

exactly. I could care less what the website looks like, It's the parts, price and service I care about.</TD></TR></TABLE>



Re read this thread. There are numerous people who have dealt with him and praise his products and service.

 

he made it, i think he's read it. while other ppl will do business with er, i dont think bailhatch will

 

I also am just starting to get into making flanges on production so getting them instock and ready to ship same or next day is going to take a few weeks. Sorry for any situations like this which will be kept to a minimum.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">he made it, i think he's read it. while other ppl will do business with er, i dont think bailhatch will</TD></TR></TABLE>

I was agreeing with bailhatch and telling lsvtecpower to reread the thread.

Lsvtecpower was the one questioning a company's service based on the cosmetics of their website.

 

oh, sorry, i misread it.

 

BMC Flanges are the best hands down. Great people to work with as well.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsvtecpower &raquo;</TD></TR><TR><TD CLASS="quote">bmc website is hardly worked on... how can we trust him either...... dang kind of hard to choose which place </TD></TR></TABLE>

I think the site is just sorta there... I also agree it sucks. But I bought a flange through him through homemadeturbo.com and it was a perfect transaction. That and the quality of the flange was very

 

Just to let you guys know... i appreciate those who have had great transactions with my company for posting there good experiences.

Also, Theres A LOT shipments going out tomorrow, so those waiting for flanges... there most likely shipping tomorrow, today i made all the B series flanges, and D-series.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExploitedRacing &raquo;</TD></TR><TR><TD CLASS="quote">I also am just starting to get into making flanges on production so getting them instock and ready to ship same or next day is going to take a few weeks. Sorry for any situations like this which will be kept to a minimum.

</TD></TR></TABLE>

 

I ordered my flanges on the 10th, you said they would ship the 13th or the 14th so we shall see.

If I would have seen this post before I ordered I might have steered away from exploited..

 

Just found out they shipped today. Last time I order from Exploited

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 5thgencivic &raquo;</TD></TR><TR><TD CLASS="quote">Just found out they shipped today. Last time I order from Exploited </TD></TR></TABLE>

Way to start clearing things up, Exploited.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegunderpressure &raquo;</TD></TR><TR><TD CLASS="quote">

Way to start clearing things up, Exploited. </TD></TR></TABLE>

What?!?!

Three days late?

That is like 2 weeks sooner than Bailhatch got his.

That is what I call improvement.

 

dang enough people...geesh...