just need some opinions. i'm going to be running mild boost on a stock block gsr and already have a edelbrock victor x manifold. a guy wants to trade for a skunk 2 pro series intake manifold. i'm only looking for 250-300 hp. should run w/ what i have or trade it?

 

Why does he want to trade?

Is it the Victor they use in their turbo kit with the additional injector mounts?

Also, 250-300hp will not require any magic in the intake manifold area, so don't fret about the choice too much.

Craig


__________________________________________________ ___________________

See our posts in the Sponsor For Sale section for deals on...
GARRETT Turbochargers!
HASPORT Motor Swap Products
SEIBON Carbon Fiber
PRECISION TURBO
Widebands / Conversion Harnesses / 3Bar Maps
SEIBON Carbon Fiber
TURBOXS

 

xenocron did a test that showed the skunk2pro making 15whp more than the victorX on a ~300whp it was also concluded that beyond that 350 the vitorX would start to take over.

 

the edelbrock is just the standard one. i was just wondering because i ordered a hondata intake gasket and i have a chance to swap the manifold out. i guess i should just keep the edelbrock since there's that small chance that i might forge the bottom end and go a little higher boost. thanks guys.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blinx9900 &raquo;</TD></TR><TR><TD CLASS="quote">xenocron did a test that showed the skunk2pro making 15whp more than the victorX on a ~300whp it was also concluded that beyond that 350 the vitorX would start to take over. </TD></TR></TABLE>

Xenocron

Craig
__________________________________________________ ___________________

See our posts in the Sponsor For Sale section for deals on...
GARRETT Turbochargers!
HASPORT Motor Swap Products
SEIBON Carbon Fiber
PRECISION TURBO
Widebands / Conversion Harnesses / 3Bar Maps
SEIBON Carbon Fiber
TURBOXS

 

edelbrock FTW better for topend.