EBAY RAM HORN
#1
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: 978, MA
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
EBAY RAM HORN
has anyone tried any of the ebay ram horn ? have any cracking issues ? im looking into one but dont want to get it if noone have any feedbacks on them looking at something like this one http://cgi.ebay.com/ebaymotors/B-Ser...Q5fAccessories
#3
Honda-Tech Member
Join Date: Aug 2009
Location: Florida
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
At this point get it and tell us how it goes. I'm tired of telling people that you get what you pay for. Ebay crap is just that CRAP. SEARCH!!!
#5
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: 978, MA
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
yes i know that but threes gotta be people out there that had good luck with these manifolds .. and if they did i would like to know ..
#6
Honda-Tech Member
Re: EBAY RAM HORN
I havent used one personally, but my boy who lives in my neighborhood (stock ls/vtec turbo) has had one. His wastegate flange, #1 runner & #3 runner cracked in three weeks of use. He has a Spoolin Performance ramhorn now.
He doesnt have an account on here, but I can get some pics & post em up if he hasnt thrown it away.
He doesnt have an account on here, but I can get some pics & post em up if he hasnt thrown it away.
Last edited by Silva Bullit DC4; 01-01-2010 at 05:19 PM.
#7
Honda-Tech Member
Join Date: Jun 2007
Location: Evansdale, ia, usa
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
look they use thin cheap **** .. all the welds sucked i had one on my d16 spend the oney 1 time buy nice good **** and save by not re buying junk !!!! just my .02 cent take it or leave it
Trending Topics
#8
Honda-Tech Member
Re: EBAY RAM HORN
cast iron only if your gonna ebay it, once you see one of the ebay tubular manifolds in person you can just invision all the little 7 year old kids in china welding it together with a flux core wire feed welder. lol
#10
Honda-Tech Member
Join Date: Oct 2009
Location: NY
Posts: 3,802
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
my friend had a turbo dc4 and purchased a ram horn header from ebay. he was only putting out 8 pounds of boost. the header lasted about half a year i think...yeh about 7 months. and it eventually cracked. i mean after all it is a header from ebay and is a replicated design. no R&D goes into these parts so u cant expect much from them especially at the price they sell for.
#12
Honda-Tech Member
Join Date: Nov 2004
Location: Lafayette, La
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
I was given an Ebay turbo kit with the same exact manifold. The "brace" thats welded to the wastegate flange is the top of the massive hole it started creating. Its very thin and I would not spend the money for a new one. Upgraded my kit fully minus the IC and am much happier. Full-race.com FTW
#13
Honda-Tech Member
Join Date: Nov 2004
Location: Lafayette, La
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
Also it started cracking about 2 months into riding it (riding it every other week at 15psi on the ebay turbo). After it starts cracking, you can't even reach boost...it gets quite depressing...so save your money and get something nicer. Well worth it
#14
Honda-Tech Member
Join Date: Jul 2008
Location: Calhoun, GA, Gordon
Posts: 1,728
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
The brace right there on the front had cracked, so My friend had to Re-Weld the manifold there. I got this to run on my turbo set up i'm doing until I can get a Nice better one.. I would say if your having to go cheap, they have some nice top mount cast irons on ebay for about $270.00 or you could just get a cast log.. but I wouldn't recommend the Ram Horn from them..
#15
Honda-Tech Member
Join Date: Aug 2007
Location: Miami,FL
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re: EBAY RAM HORN
Thanks for the pic. From what I'm seeing by searching they all seem to crack at the wastegate. Definately an area to reinforce or even weld on thicker tubing to support the wastegate.
#16
Re: EBAY RAM HORN
well, just by looking at the beads at every joint, the welds were just horrible, definately not TIG welded like stainless tubing should be, but flux core wire fed(like someone mentioned already) by someone with little skill. Not to mention they use lower quality stainless steel too. If you could weld, you could lightly grind all the beads and tig a nice wide bead over all the seams...but i'd just save a lil more cash and get something nicer. just my thought.
#18
Honda-Tech Member
Re: EBAY RAM HORN
have one now.....
they are JUNK!!!!!
just as much junk as the other ebay tubular manifolds...
its has cracked so many times im not welding it up anymore!
going to cast.
they are JUNK!!!!!
just as much junk as the other ebay tubular manifolds...
its has cracked so many times im not welding it up anymore!
going to cast.
#19
Re: EBAY RAM HORN
or just spend the money once on a professionally made stainless tubular manifold that will make more power, and last as long or longer than a cast manifold.
#20
Honda-Tech Member
Join Date: Jul 2008
Location: Calhoun, GA, Gordon
Posts: 1,728
Likes: 0
Received 0 Likes
on
0 Posts
#24
Re: EBAY RAM HORN
www.bmcrace.com is a good 1 i kno of..i ran their topmount and never had a problem...and i run their intake mani now...good company