Dyno: SOHC, SC61, AEM
#1
Honda-Tech Member
Thread Starter
Dyno: SOHC, SC61, AEM
Honda CRX
sc61 on a log manifold
3 inch open dp
skunk2 intake manifold
stock sleeves
3 bar map sensor
AEM management--tuned by Brad Brooks
car was tuned on slicks..on my car when we started spinning the street tires at 600 horsepower...jacked the car up and put it on slicks...the car lost 40 horsepower from the tire change.
car has previously been mid 11's, and im sure it will make a 10 second pass next time out once he puts some good tires on it. currently running on old beat up from the dyno 24.5x7's. need to get some 24.5x9's on there.
im sure vance can chime in with more specs on the motor...head/cam/etc.
sc61 on a log manifold
3 inch open dp
skunk2 intake manifold
stock sleeves
3 bar map sensor
AEM management--tuned by Brad Brooks
car was tuned on slicks..on my car when we started spinning the street tires at 600 horsepower...jacked the car up and put it on slicks...the car lost 40 horsepower from the tire change.
car has previously been mid 11's, and im sure it will make a 10 second pass next time out once he puts some good tires on it. currently running on old beat up from the dyno 24.5x7's. need to get some 24.5x9's on there.
im sure vance can chime in with more specs on the motor...head/cam/etc.
Trending Topics
#8
B*a*n*n*e*d
Join Date: Jul 2006
Location: DFW, TX, U.S.A
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RC000E)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RC000E »</TD></TR><TR><TD CLASS="quote">Log mani FTW </TD></TR></TABLE>
haha no kidding
haha no kidding
#9
Junior Member
Join Date: Jun 2007
Location: Great Mills, MD, USA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SovXietday)
The car is sick, and does need new slicks, (no traction at all) The car is def. capable of a ten second pass. Vance and I ran the car Friday night at MIR. First pass was 11.2 @ 128mph spinning through 1st and 2nd gear. The second pass, serious traction problems due to the track cooling off, and worn tired old slicks lol. Ran a 11.5 @ 124mph spinning through 1st 2nd and 3rd gear this time. 60' time was 1.87 We're running 30psi with 11degrees timing. on Torco 116 race gas, Brad Brooks is the man, Def. knows his stuff on tunning. There will be videos posted tonight of the car, so watch for them.
#10
Honda-Tech Member
Join Date: Oct 2003
Location: Budds Creek, MD, amishtown
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Re: (turbo_zo)
Thank's for the thread joe. This has been a long time coming for me.
My d16z6 build
- d16z6 stock sleeves
- JE 9:1:1 pistons
- Eagle rods
- Golden Eagle block guard
- ACL race bearings
- ARP head studs
- ZEX 59300 cam
- cometic head gasket
- Crower springs and retainers
- Mild port and polished head by me
- Head milled .013
- skunk 2 intake manifold ported to 74mm by me
- 74mm erick's racing throttlebody
- 1000cc precision injectors running at 80% due to fuel pump
- 255 walbro fuel pump
- Aem fuel rail and Weapon R afr
- Rev Hard log manifold
- custom made 3" downpipe
- sc61 precision turbo
- AEM EMS tuned by Brad Brooks and Tempest Racing
- quaife limited slip dif
- Tech Edge wide band
- Torco 116 fuel
- Royal Purple oil
And some other things I probably forgot.
Here is a link to a video from last friday!! Enjoy
http://www.youtube.com/watch?v=XhSci79lDoM
Modified by Newt Dog at 1:57 AM 6/18/2007
Modified by Newt Dog at 1:23 AM 6/24/2007
My d16z6 build
- d16z6 stock sleeves
- JE 9:1:1 pistons
- Eagle rods
- Golden Eagle block guard
- ACL race bearings
- ARP head studs
- ZEX 59300 cam
- cometic head gasket
- Crower springs and retainers
- Mild port and polished head by me
- Head milled .013
- skunk 2 intake manifold ported to 74mm by me
- 74mm erick's racing throttlebody
- 1000cc precision injectors running at 80% due to fuel pump
- 255 walbro fuel pump
- Aem fuel rail and Weapon R afr
- Rev Hard log manifold
- custom made 3" downpipe
- sc61 precision turbo
- AEM EMS tuned by Brad Brooks and Tempest Racing
- quaife limited slip dif
- Tech Edge wide band
- Torco 116 fuel
- Royal Purple oil
And some other things I probably forgot.
Here is a link to a video from last friday!! Enjoy
http://www.youtube.com/watch?v=XhSci79lDoM
Modified by Newt Dog at 1:57 AM 6/18/2007
Modified by Newt Dog at 1:23 AM 6/24/2007
#14
Honda-Tech Member
Join Date: Oct 2003
Location: Budds Creek, MD, amishtown
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Autoworks)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Autoworks »</TD></TR><TR><TD CLASS="quote">
very nice,
What axles are you using?</TD></TR></TABLE>
A very lucky set of stock si axle's! Haven't broken one yet. knock on wood..
I have a jimfab traction bar, 24.5x7x13 m/t. No wheel hop, Just spin's it's *** off. I just ordered 24.5x8.5x13 m/h's
very nice,
What axles are you using?</TD></TR></TABLE>
A very lucky set of stock si axle's! Haven't broken one yet. knock on wood..
I have a jimfab traction bar, 24.5x7x13 m/t. No wheel hop, Just spin's it's *** off. I just ordered 24.5x8.5x13 m/h's
#15
Honda-Tech Member
Re: (Newt Dog)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Newt Dog »</TD></TR><TR><TD CLASS="quote">
A very lucky set of stock si axle's! Haven't broken one yet. knock on wood..
I have a jimfab traction bar, 24.5x7x13 m/t. No wheel hop, Just spin's it's *** off. I just ordered 24.5x8.5x13 m/h's </TD></TR></TABLE>
sounds good
A very lucky set of stock si axle's! Haven't broken one yet. knock on wood..
I have a jimfab traction bar, 24.5x7x13 m/t. No wheel hop, Just spin's it's *** off. I just ordered 24.5x8.5x13 m/h's </TD></TR></TABLE>
sounds good
#16
Re: Dyno: SOHC, SC61, AEM (Turbo-charged)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo-charged »</TD></TR><TR><TD CLASS="quote">Honda CRX
sc61 on a log manifold
3 inch open dp
skunk2 intake manifold
stock sleeves
3 bar map sensor
AEM management--tuned by Brad Brooks
car was tuned on slicks..on my car when we started spinning the street tires at 600 horsepower...jacked the car up and put it on slicks...the car lost 40 horsepower from the tire change.
car has previously been mid 11's, and im sure it will make a 10 second pass next time out once he puts some good tires on it. currently running on old beat up from the dyno 24.5x7's. need to get some 24.5x9's on there.
im sure vance can chime in with more specs on the motor...head/cam/etc.
</TD></TR></TABLE>
My old B16A made 676whp on street tires, swapped to slicks made 656whp . Our results are very similar
Dyno #s looking good, hope to see some 10's out of it
sc61 on a log manifold
3 inch open dp
skunk2 intake manifold
stock sleeves
3 bar map sensor
AEM management--tuned by Brad Brooks
car was tuned on slicks..on my car when we started spinning the street tires at 600 horsepower...jacked the car up and put it on slicks...the car lost 40 horsepower from the tire change.
car has previously been mid 11's, and im sure it will make a 10 second pass next time out once he puts some good tires on it. currently running on old beat up from the dyno 24.5x7's. need to get some 24.5x9's on there.
im sure vance can chime in with more specs on the motor...head/cam/etc.
</TD></TR></TABLE>
My old B16A made 676whp on street tires, swapped to slicks made 656whp . Our results are very similar
Dyno #s looking good, hope to see some 10's out of it
#19
Honda-Tech Member
Join Date: Oct 2003
Location: Budds Creek, MD, amishtown
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno: SOHC, SC61, AEM (SOHC_MShue)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">Nice power guys. I cant wait to see this thing run 10's </TD></TR></TABLE>
Slick's are on the way!!
Slick's are on the way!!
#21
i ♥ my honda
Global Mod
Global Mod
Re: Dyno: SOHC, SC61, AEM (Turbo-charged)
Oh, yeah 10's no problem! Some better slicks and your in there
<FONT COLOR="orange">Tempest</FONT>
Video looks good too
<FONT COLOR="orange">Tempest</FONT>
Video looks good too
#22
Re: Dyno: SOHC, SC61, AEM (White Smoke)
damn buddy, its about time, i know you have been dieing to crack a ten just like me, you seemed pretty happy about your first pass even with the issues you had, with that hp and your weight tens shouldnt be a problem bud ill see you this friday, hopefully we both will get lucky!
#23
Honda-Tech Member
Join Date: Oct 2003
Location: Budds Creek, MD, amishtown
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno: SOHC, SC61, AEM (95dxb18c1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95dxb18c1 »</TD></TR><TR><TD CLASS="quote">damn buddy, its about time, i know you have been dieing to crack a ten just like me, you seemed pretty happy about your first pass even with the issues you had, with that hp and your weight tens shouldnt be a problem bud ill see you this friday, hopefully we both will get lucky! </TD></TR></TABLE>
Yea, We should not have a problem if we can get traction.. I ordered some 24.5x8.5x13 M/H's today. Got some good video of your run..
Yea, We should not have a problem if we can get traction.. I ordered some 24.5x8.5x13 M/H's today. Got some good video of your run..