DIY: Greddy Type Mase
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: The Swamp, FL
Posts: 7,139
Likes: 0
Received 0 Likes
on
0 Posts
DIY: Greddy Type Mase
Haha, this is a pointless thread, but for all of those who've never seen the private parts of BOV, heres your chance.
First you take an ordinary Greddy Type S bov shown below
Then take it apart like so:
Then its time for the Mase Transformation. I dont know about you guys, but I hate gay purple.
Greddy Type S + Sand Paper + More Sandpaper + Time + hurt hands = blingin' Greddy Type Mase
HOLY COW!!! too blingin' to get a picture of.....
j/k
There I hope you liked my dumb post...Cheers
First you take an ordinary Greddy Type S bov shown below
Then take it apart like so:
Then its time for the Mase Transformation. I dont know about you guys, but I hate gay purple.
Greddy Type S + Sand Paper + More Sandpaper + Time + hurt hands = blingin' Greddy Type Mase
HOLY COW!!! too blingin' to get a picture of.....
j/k
There I hope you liked my dumb post...Cheers
Trending Topics
#10
Honda-Tech Member
Join Date: Mar 2001
Location: Ft. Worth, TX
Posts: 3,650
Likes: 0
Received 0 Likes
on
0 Posts
Re: DIY: Greddy Type Mase (B18Flip)
I did that to my TurboXS type s a while back, but it has grooves that are really hard so sand out, so now it has purple stripes
#14
Honda-Tech Member
Re: DIY: Greddy Type Mase (FBP Si 2000)
mase you are the man when you took the top off did the spring shoot out ? would that purple stuff come off with paint stripper ? thanks .
#15
Re: DIY: Greddy Type Mase (jonny5)
its not paint, its kinda anodized i think. im pretty you are going to have to use an abrasive to remove the purple. im gonna polish mine this weekend! great idea, go FL boys....haha jk.. yeah im an idiot.
#16
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: The Swamp, FL
Posts: 7,139
Likes: 0
Received 0 Likes
on
0 Posts
Re: DIY: Greddy Type Mase (00TurboEX)
I think you will have to sand it off. dont be dumb like me, i did it by hand, which took forever and a day, use a dremel, it sure sucked getting the corners and ****
#17
New User
Join Date: Oct 2001
Location: Southern Cali
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Re: DIY: Greddy Type Mase (Mase)
Nice Work Very Nice . It looks like my old BOV got a good Home Enjoy the BOV Now
Later David
[Modified by Civic Power, 11:07 PM 12/10/2002]
Later David
[Modified by Civic Power, 11:07 PM 12/10/2002]
#18
Member
Join Date: May 2001
Location: The Pacific, Northwest
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
Re: DIY: Greddy Type Mase (Civic Power)
Did you use a metal polish at all?
I polished my Vtec solenoid head using the following steps:
220 grit
400 grit
800 grit
1500 grit
2000 grit
Mothers Metal Polish applied with Dremal tool and polishing pad.
I have to say, the Mothers polish and Dremal tool made all the differnce....it took it from a nice shinny finish to a mirror like gleam...I couln't believe how shinny it was!!!! I also did it to my distributer and drivers side mount...I didn't spend enough time on those peices so they arent as shinny...
I polished my Vtec solenoid head using the following steps:
220 grit
400 grit
800 grit
1500 grit
2000 grit
Mothers Metal Polish applied with Dremal tool and polishing pad.
I have to say, the Mothers polish and Dremal tool made all the differnce....it took it from a nice shinny finish to a mirror like gleam...I couln't believe how shinny it was!!!! I also did it to my distributer and drivers side mount...I didn't spend enough time on those peices so they arent as shinny...
#19
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: The Swamp, FL
Posts: 7,139
Likes: 0
Received 0 Likes
on
0 Posts
Re: DIY: Greddy Type Mase (InfamousRS)
actually i didnt run to the store for anything, i used what i had here:
60 grit (ouch)
400
1000
2000
im gonna use a dremel and metal polish later down the road.....
60 grit (ouch)
400
1000
2000
im gonna use a dremel and metal polish later down the road.....