Is there a big difference from a precision 350 intercooler and one of equal measurements off of ebay??

 

bump

 

up is it worth the 230 or should I go fo the 100 ebay one

 

Ebay. They are bar and plate intercoolers which are better than tube and fin.

Plus, its pretty hard to expletive up an intercooler. Save yourself the $130 and buy the ebay one.

 

That is unless the brackets, endtanks and welding hasn't gone through hell.

I'd stick w/ the Precision or Sparco.. Save the piece of mind, not just the cash.

 

go with the ebay intercooler i run one at 28 psi no issues

 

would there be any power difference?

im going to be running a fully built sohc with t3 60 trim turbo at around 20 minimum boost.

 

i have a fully buil z6 running 28 psi on a t3/t04e 57 trim, my IAT's are great

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTteg &raquo;</TD></TR><TR><TD CLASS="quote">Ebay. They are bar and plate intercoolers which are better than tube and fin. </TD></TR></TABLE>

I heard the exact opposite.

 

i thought tube/fin had less pressure drop but slightly less cooling capazity while the bar and plate cooled better but had more turbulence

 

When I did a few searches on here, I found that the majority believe that bar and plate are more efficient.

 

Here is the thread I was referring to.

https://honda-tech.com/zerothread?id=416595

 

hmm
this one is 100 shipped

http://cgi.ebay.com/ebaymotors...%3AIT

 

Ha, thats actually the exact same one I have.

 

Ebay baby!!!

 

Ebay