DARTON OR GE SLEEVES ?
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Henderson, NV, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
DARTON OR GE SLEEVES ?
HI everyone I need some opinion between this sleeves which one you thinks is better and has better warantee against sinking, no offense to any of this companies I'm just looking out for my $$$ THANKS
#2
Re: DARTON OR GE SLEEVES ? (1fastEK9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1fastEK9 »</TD></TR><TR><TD CLASS="quote">HI everyone I need some opinion between this sleeves which one you thinks is better and has better warantee against sinking, no offense to any of this companies I'm just looking out for my $$$ THANKS</TD></TR></TABLE>
This subject has been discussed too many times over the last 7 years or so.
You can't go wrong with either sleeves, not at all! If you go Darton just make sure you have a qualified machine shop to install them, PREFERABBLY someone who has alot of experience with them. ERL sleeves them and they are great, GE does great work as well.
There is no horsepower difference between the sleeving companies they will take what you throw at them. GE hasn't had too many probs in a loong time with sinking as far as I know. Again you can't go wrong either way
Oh but watch out for those threads out there that state "Hey this why is why XXX sleeves is BETTER THAN ANYONE ELSE" blah blah blah those are great Marketing Threads
This subject has been discussed too many times over the last 7 years or so.
You can't go wrong with either sleeves, not at all! If you go Darton just make sure you have a qualified machine shop to install them, PREFERABBLY someone who has alot of experience with them. ERL sleeves them and they are great, GE does great work as well.
There is no horsepower difference between the sleeving companies they will take what you throw at them. GE hasn't had too many probs in a loong time with sinking as far as I know. Again you can't go wrong either way
Oh but watch out for those threads out there that state "Hey this why is why XXX sleeves is BETTER THAN ANYONE ELSE" blah blah blah those are great Marketing Threads
#6
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Henderson, NV, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: (92redhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92redhatch »</TD></TR><TR><TD CLASS="quote">i havent heard anything bad about darton. thats why my block is at ERL right now getting sleeved.</TD></TR></TABLE>
how much are u paying
how much are u paying
Trending Topics
#10
Re: DARTON OR GE SLEEVES ? (1fastEK9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1fastEK9 »</TD></TR><TR><TD CLASS="quote">I also like your time you have on your Si thats what kind of sleeves are you runing</TD></TR></TABLE>
I actually have a Goldene Eagle block at the machine shop now getting bored and honed for some custom Wiseco Pistons. The times in my sig are actually on a Stock sleeved LS block with pistons and rods and a stock B16A head with springs and retainers only
Once I get my BIG BLOCK I shluld run better times, we shall see. These Golden Eagle Sleeves have been great for me since I had run it in the past and had it bored bigger now
I actually have a Goldene Eagle block at the machine shop now getting bored and honed for some custom Wiseco Pistons. The times in my sig are actually on a Stock sleeved LS block with pistons and rods and a stock B16A head with springs and retainers only
Once I get my BIG BLOCK I shluld run better times, we shall see. These Golden Eagle Sleeves have been great for me since I had run it in the past and had it bored bigger now
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Henderson, NV, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: (92redhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92redhatch »</TD></TR><TR><TD CLASS="quote">$1500 sleeves / instalation /bore /hone/ line bore/ cleaning etc....
its not bad.</TD></TR></TABLE>
I'm sorry 2 tell you that you paid 2 much I just got off the phone with them in cali and they price me 1175 for everything
its not bad.</TD></TR></TABLE>
I'm sorry 2 tell you that you paid 2 much I just got off the phone with them in cali and they price me 1175 for everything
#16
Re: DARTON OR GE SLEEVES ? (1fastEK9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1fastEK9 »</TD></TR><TR><TD CLASS="quote">^^^ so you went with GE sleeves</TD></TR></TABLE>
I had a GE B16A block back in the day then a Darton sleeved B16A block that never once gave me any issues, I sold it though I wish I still had it. Also had a GE B16A that I sold too.
I got an extremely good deal on a GE B18C block so I picked it up. Again GE, Darton, ERL, AEBS etc etc you can't go wrong.
I actually just had 2 blocks sleeved with AEBS sleeves for customers recently, I have one more block to get done also. These were done by Jeremy Allen at Inline Pro. All these companies are great.
I had a GE B16A block back in the day then a Darton sleeved B16A block that never once gave me any issues, I sold it though I wish I still had it. Also had a GE B16A that I sold too.
I got an extremely good deal on a GE B18C block so I picked it up. Again GE, Darton, ERL, AEBS etc etc you can't go wrong.
I actually just had 2 blocks sleeved with AEBS sleeves for customers recently, I have one more block to get done also. These were done by Jeremy Allen at Inline Pro. All these companies are great.
#18
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Henderson, NV, USA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: DARTON OR GE SLEEVES ? (Blueprint)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blueprint »</TD></TR><TR><TD CLASS="quote">talk to Camp1320.com here on h-t. They got the best pricing. GE HD sleeves
</TD></TR></TABLE>
I will call them 2 I hear good things about them
</TD></TR></TABLE>
I will call them 2 I hear good things about them
#20
Re: (1995Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1995Civic »</TD></TR><TR><TD CLASS="quote">Im suprised to see that noone mentioned Benson in this thread?</TD></TR></TABLE>
Probably because the Original Poster asked about GE and Darton only so... Too often threads get waaay off base from the OP's actual question or products asked about.
As mentioned before all the sleeving companies do a great job, they all work BUT don't get roped into the hype of "This is the reason why XXX blocks are the best and how they are made" blah blah
Probably because the Original Poster asked about GE and Darton only so... Too often threads get waaay off base from the OP's actual question or products asked about.
As mentioned before all the sleeving companies do a great job, they all work BUT don't get roped into the hype of "This is the reason why XXX blocks are the best and how they are made" blah blah
#24
Re: (Boostfed.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com »</TD></TR><TR><TD CLASS="quote">
Probably because the Original Poster asked about GE and Darton only so... Too often threads get waaay off base from the OP's actual question or products asked about.
As mentioned before all the sleeving companies do a great job, they all work BUT don't get roped into the hype of "This is the reason why XXX blocks are the best and how they are made" blah blah
</TD></TR></TABLE>
I understand that...I was just curious, because I also saw that ERL and AEBS were brought up, so i figured why not Benson?...which is good **** btw!
Probably because the Original Poster asked about GE and Darton only so... Too often threads get waaay off base from the OP's actual question or products asked about.
As mentioned before all the sleeving companies do a great job, they all work BUT don't get roped into the hype of "This is the reason why XXX blocks are the best and how they are made" blah blah
</TD></TR></TABLE>
I understand that...I was just curious, because I also saw that ERL and AEBS were brought up, so i figured why not Benson?...which is good **** btw!
#25
Re: (1995Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1995Civic »</TD></TR><TR><TD CLASS="quote">
I understand that...I was just curious, because I also saw that ERL and AEBS were brought up, so i figured why not Benson?...which is good **** btw! </TD></TR></TABLE>
Pretty much all the sleeving companies are good out there, I wouldn't trust SS Autocrome if they started sleeving though
I understand that...I was just curious, because I also saw that ERL and AEBS were brought up, so i figured why not Benson?...which is good **** btw! </TD></TR></TABLE>
Pretty much all the sleeving companies are good out there, I wouldn't trust SS Autocrome if they started sleeving though