hawkturbo

how good they are this rods for force induction aplication can rev too 9,000

DaveF

those rods ^^^ need to be recondition'd

we were using an old set of crowers (from 2002) making ~800hp reving to 11k or so in the hotrod coupe. we went 8.75@165 on that bottom end.

hawkturbo

thanks dave for the info

purpleh22

Don't know if these are Econo Billet or the Pro Series rods. Earlier H/T posting said they believed both types were the same construction/manufacturer and the difference was that on the Pros, Crower does the finish machining themselves. Might want to have them Magnafluxed and reconditioned to be sure they're ok.

DaveF

the econo billet looks like an eagle rod.