Cost for pistons?
#6
New User
Join Date: Nov 2000
Location: Omaha, NE, USA
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cost for pistons? (hybridxcivic)
$500 for pistons, and 750 for machine work on the entire block. I had a lot of machine work done though.
bore, hone, deck the surface, hone the crank girdle, micropolish the crank, and machine the pistons cost me 750 and about 5 days
bore, hone, deck the surface, hone the crank girdle, micropolish the crank, and machine the pistons cost me 750 and about 5 days
Trending Topics
#9
Honda-Tech Member
iTrader: (1)
Re: Cost for pistons? (hybridxcivic)
I bought my pistons and rods as a combo for 850 bucks(20 for shipping).
Here's the list:
je pistons(9.0:1) .20 over
rings
pins
clips
eagle rods
I think that was a pretty good price. I bought it from ARI(auto race industries)
A local machine shop is doing the machine work...
resufacing the head(it has a fucken scratch on it)
boring and honing
decking
hot tanking
micing the crank(for bearing sizes)
balancing all the parts
for 450
then I assemble
Here's the list:
je pistons(9.0:1) .20 over
rings
pins
clips
eagle rods
I think that was a pretty good price. I bought it from ARI(auto race industries)
A local machine shop is doing the machine work...
resufacing the head(it has a fucken scratch on it)
boring and honing
decking
hot tanking
micing the crank(for bearing sizes)
balancing all the parts
for 450
then I assemble
Thread
Thread Starter
Forum
Replies
Last Post
Touch
All Motor / Naturally Aspirated
7
10-18-2005 10:47 AM