B18c4 turbo set up
#1
Honda-Tech Member
Thread Starter
Join Date: May 2014
Location: Swindon - UK
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
B18c4 turbo set up
Hi Guys,
After copious amounts of research, talking to suppliers and some very knowledgeable people, I have finally put together my boost parts list & prices ..
Interested in your thoughts/opinions ..
After copious amounts of research, talking to suppliers and some very knowledgeable people, I have finally put together my boost parts list & prices ..
Interested in your thoughts/opinions ..
#6
Honda-Tech Member
Thread Starter
Join Date: May 2014
Location: Swindon - UK
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18c4 turbo set up
Yes, EVO injectors from the Mitshubishi's.. More readily available over here.
BOV I never thought was massively important in terms of brand .. Exhaust will be custom made by me ..
Some form of manual boost controller, this will be a reputable brand.. Greddy or Apexi perhaps..
Anything i've missed off the list?
BOV I never thought was massively important in terms of brand .. Exhaust will be custom made by me ..
Some form of manual boost controller, this will be a reputable brand.. Greddy or Apexi perhaps..
Anything i've missed off the list?
#7
Swaggylicious
Re: B18c4 turbo set up
Just as long as you don't get a fake greddy BOV that will leak or something
for a manual boost controller, I'm using Hallman and it's been pretty good so far
for a manual boost controller, I'm using Hallman and it's been pretty good so far
Trending Topics
#9
Moderator
iTrader: (14)
Re: B18c4 turbo set up
Hallmans are fantastic manual controllers. GReddy BOVs are a good choice as long as not a knock-off. BOV is VERY important to make sure that boost pressure and the tune of the car is consistent .
Another set of great companies that doesn't require specific springs for adjustment are the SAMCO BOVs (Yes, the same company known for their hoses...) and Turbosmart.
No springs to switch up, no worry about proper vacuum to spring ratio.
Another set of great companies that doesn't require specific springs for adjustment are the SAMCO BOVs (Yes, the same company known for their hoses...) and Turbosmart.
No springs to switch up, no worry about proper vacuum to spring ratio.
Thread
Thread Starter
Forum
Replies
Last Post
91ls-v
Northern California (Sales)
1
09-27-2010 08:30 PM
booscivic
Classifieds: Forced Induction
5
02-09-2009 01:21 PM
booscivic
Mid-Atlantic (Sales)
5
02-09-2009 01:20 PM