B16 with Inline pro: Which IM??
09-30-2006, 11:12 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: Grabbing 4th at 9000, Somewhere, here
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
B16 with Inline pro: Which IM??
I've been running the inline manifold manifold on my motor with a stock b16 IM.
I am now building another b16 and am planning to rev it out to 10k (thats where the rev limit will be).
I guess the question is 1) Do I run a similar manifold with larger plenum? like AEBS or Skunk2 with similar runners?
2) Do I run a manifold like the GE or Victor X??
This is going on a B16 81.5mm bore. Is there a manifold that will leave some low end and breathe well into 10k?
I looked at a BBK that seemes to have a smaller plenum than the victor X but also the short runners.
Give me your input, I was thinking Victor X.
I am now building another b16 and am planning to rev it out to 10k (thats where the rev limit will be).
I guess the question is 1) Do I run a similar manifold with larger plenum? like AEBS or Skunk2 with similar runners?
2) Do I run a manifold like the GE or Victor X??
This is going on a B16 81.5mm bore. Is there a manifold that will leave some low end and breathe well into 10k?
I looked at a BBK that seemes to have a smaller plenum than the victor X but also the short runners.
Give me your input, I was thinking Victor X.
Thread
Thread Starter
Forum
Replies
Last Post
No VDUBS here in206
Honda Civic / Del Sol (1992 - 2000)
2
02-05-2009 10:32 AM