all nor cal boosters!!
Thread Starter
B*a*n*n*e*d
Joined: Nov 2001
Posts: 991
Likes: 0
From: sacramento, ca, usa
all nor cal boosters!!
I need to find a machine shop in northern california to bore an hone my block, balance an blueprint it. an since the crank isnt from the the motor orginally, i'm thinking i need to get that machined also.
[Modified by thejdmkid, 10:11 PM 7/1/2002]
[Modified by thejdmkid, 10:11 PM 7/1/2002]
Thread Starter
B*a*n*n*e*d
Joined: Nov 2001
Posts: 991
Likes: 0
From: sacramento, ca, usa
Re: all nor cal boosters!! (GudeH23a)
what about comptech there pretty close??????? expensive
also do u think that a local machine shop could handle this task without f**kin it up
also do u think that a local machine shop could handle this task without f**kin it up
Joined: May 2002
Posts: 4
Likes: 0
From: Citrus Heights, CA, USA
Re: all nor cal boosters!! (thejdmkid)
I have my '00 GSR block up at Comptech right now. Threw a JRSC on it and ran a little lean....long story short. They're boring out to put oversize Honda pistons in (didn't want to deal with alloy problems), balancing pistions, new rings, timing belt, gaskets/seals, labor, shaving block....out the door $2,300. Kind of depressing. I also pulled the engine myself and took it up there to save money on them pulling it. Let me know if you have any ?'s.
Thread
Thread Starter
Forum
Replies
Last Post
leadfoot78
Honda Civic / Del Sol (1992 - 2000)
2
Oct 24, 2003 11:16 AM