94 teg getting built have some ???????s
12-07-2005, 11:51 AM
#1
Honda-Tech Member
Thread Starter
94 teg getting built have some ???????s
i got a 1994 teg with a b18b so far i got a new crank bearings darton sleeves put in the block eagle rods and je 8.5.1 pistons blockgaurd. The head is being done by kms. ported 5 angle valve job and stage 2 cams im going to use 750cc injectors
t3/t4 turbo? My question is should i retard the timing . I was going to use hondata s200 with boost along with a 3bar map. Then i was going to have the car hauled to hybrid dynamics which its not to far from my house for dyno tuning or up to evens tuning in easton pa.
any help would be great. the reason i ask is because i use to have a 1.6 sohc in a civic turbo and we had to retard the timing and i was using a jackson racing boost timing controller. i ran 7psi .
t3/t4 turbo? My question is should i retard the timing . I was going to use hondata s200 with boost along with a 3bar map. Then i was going to have the car hauled to hybrid dynamics which its not to far from my house for dyno tuning or up to evens tuning in easton pa.
any help would be great. the reason i ask is because i use to have a 1.6 sohc in a civic turbo and we had to retard the timing and i was using a jackson racing boost timing controller. i ran 7psi .
Thread
Thread Starter
Forum
Replies
Last Post
HMTforlife
Engine Management and Tuning
12
07-21-2008 06:31 AM
