604whp Accord..........
#1
Thread Starter
Join Date: Jun 2004
Location: Minneapolis, MN
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
604whp Accord..........
Well my accord is all finished for now. Turned out pretty well imo. I made 604whp and 482 ft-lbs. The fall of at the end was a miss fire because the spark plug wires were coming loose at the end of the run. So we zip-tied them on and the power band just stays level all the way to 8k rpm. next few pulls it made 602 and 599. I was happy with those numbers so we called it a night at 2:00AM lol. This power was made with a full T4 turbo and also the stock head/cams/intake manifold/throttle body. I even still have the intake butterflys functioning. I will be taking the car to the track in a week or so and we shall see how it does.
Here's some pics
Modified by Drag-Accord at 9:23 AM 2/27/2006
Here's some pics
Modified by Drag-Accord at 9:23 AM 2/27/2006
Trending Topics
#14
Honda-Tech Member
iTrader: (1)
Re: 604whp Accord.......... (Drag-Accord)
that's some sick *** power from 6k to 8k. hope to see the car in person tomorrow at elite! hopefully my new setup makes close to that much power...but i know my power curve will be nothing close to yours...which makes me sad.
#15
Honda-Tech Member
Join Date: Aug 2001
Location: manakin sabot, va, us
Posts: 4,083
Likes: 0
Received 0 Likes
on
0 Posts
Re: (red_crx)
nice power get some times this weekend
BTW wheres the vtec xover the somthing look funny , the chart looks a mph dyno but its by rpm with no vtec jump? what rpm is vtec coming on?
BTW wheres the vtec xover the somthing look funny , the chart looks a mph dyno but its by rpm with no vtec jump? what rpm is vtec coming on?
#17
Thread Starter
Join Date: Jun 2004
Location: Minneapolis, MN
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DLB1994)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DLB1994 »</TD></TR><TR><TD CLASS="quote">nice power get some times this weekend
BTW wheres the vtec xover the somthing look funny , the chart looks a mph dyno but its by rpm with no vtec jump? what rpm is vtec coming on?</TD></TR></TABLE>
waiting for someone to notice that.
vtec is at 5k rpm. and there's nothing to see because of the stock cams and stock everything else. Cams would make it look like a vtec curve.
Here's a pic of the 10-point cage. Rear doors completely cut out, rear dash cut out/ everything behind front dash is gone/ dash board is even gutted. It's a tin can, and i'm going to be weighing it hopefully later this week.
Believe it or not, i drove it to work like this today lol.
BTW wheres the vtec xover the somthing look funny , the chart looks a mph dyno but its by rpm with no vtec jump? what rpm is vtec coming on?</TD></TR></TABLE>
waiting for someone to notice that.
vtec is at 5k rpm. and there's nothing to see because of the stock cams and stock everything else. Cams would make it look like a vtec curve.
Here's a pic of the 10-point cage. Rear doors completely cut out, rear dash cut out/ everything behind front dash is gone/ dash board is even gutted. It's a tin can, and i'm going to be weighing it hopefully later this week.
Believe it or not, i drove it to work like this today lol.