Does any one have any pics 3inch exhaust on a eg turned at a angle that i can see?

 

post this in Appearance and u will get better results.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostage &raquo;</TD></TR><TR><TD CLASS="quote">post this in Appearance and u will get better results.</TD></TR></TABLE>

indeed

 

well i havent got any replys from anyone yet so who knows?

 

my guess it will look the exact same as a 2 inch exhaust angled in that direction, just with a 3 in inlet. good luck if its routed below the LCA's. angled= ugly IMHO anyways. unless of coarse your looking to be from japan

 

refer to avatar.... overdoing jdm is the new rice

 

i have a 6" on my daily driven yugo.

 

^ you need it with that turbo you never got me pics of

 

Here's mine. Goes straight back under the gas tank....looks hella low, but I don't scrape toooo bad.





...hope that helps

 

^^^ looks like that exhaust rides on the ground

 

woah. can't say i like that setup at all...but on the other hand stuff like kthat depends on what kinds of roads you drive on.

i would scrape a shitload with that low exhaust

 

Where did this angled exhaust trend start?It looks like the guy at the muffler shop was drunk when he did the install.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pgmatt &raquo;</TD></TR><TR><TD CLASS="quote">Where did this angled exhaust trend start?It looks like the guy at the muffler shop was drunk when he did the install. </TD></TR></TABLE>

i agree 100%. JDM is just a fad that will soon be overlooked. now a days who isnt "jdm"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SSBPGSR &raquo;</TD></TR><TR><TD CLASS="quote">

i agree 100%. JDM is just a fad that will soon be overlooked. now a days who isnt "jdm" </TD></TR></TABLE>
Im not JDM.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">refer to avatar.... overdoing jdm is the new rice</TD></TR></TABLE>

 

Thanks for the pics and answering my questions i dont think im goin to go taht route because of scrapping either!

And i dont give a **** about jdm this or that i think it is dumb as hell to pay 500 dollars for a bag of **** that has spoon wrote on it, but thanx for the good replys!

 

JDM=ju da man

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pgmatt &raquo;</TD></TR><TR><TD CLASS="quote">Where did this angled exhaust trend start?It looks like the guy at the muffler shop was drunk when he did the install. </TD></TR></TABLE>

It started with race cars in japan that had the exhaust system go straight back with no bends. They just had one slight bend so the muffler could exit through the cut out in the bumper.

 

I would never be able to drive my car where I live with an exhaust as low as TopSecret's. I'd be scraping **** all the time, and I like my **** looking clean.

 

who quotes theirself?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by m R g S r &raquo;</TD></TR><TR><TD CLASS="quote">who quotes theirself? </TD></TR></TABLE>


a ricer.