installing 4 pin header
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Mar 2007
Posts: 803
Likes: 0
From: Granger, IN, United States
installing 4 pin header
does anyone have a picture of where the header goes exactly in a p75 converted to p28? i know the spot but there are 5 solder points and its only a 4 pin header.
anyone got a picture of the exact spot for the 4 pin header?
or a description works too.
anyone got a picture of the exact spot for the 4 pin header?
or a description works too.
Honda-Tech Member
Joined: Mar 2007
Posts: 11,399
Likes: 69
From: East Coast 506, Canada
Re: installing 4 pin header
You solder the pins in CN2 pos. 1-2-3-4 leave 5 open. Position number 1 is labeled.
Not the greatest picture but here is a P75 that I did recently for a customer.
with the ECU oriented as pictured above pins are from right to left
Pin # 1 - Ground
Pin # 2 - Rx (recieve)
Pin # 3 - 5v (not used)
Pin # 4 - Tx (transmit)
Not the greatest picture but here is a P75 that I did recently for a customer.
with the ECU oriented as pictured above pins are from right to left
Pin # 1 - Ground
Pin # 2 - Rx (recieve)
Pin # 3 - 5v (not used)
Pin # 4 - Tx (transmit)
Last edited by GhostAccord; Nov 4, 2009 at 05:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post
