Alright I put a B20 Vtec in my 94 Acura RS I am using a vtec wire harness and I know that I have to ad the vtec to the harness. Well I let my friend do it cus he said he new how and come to realize he doesnt at first he said all he had to do was switch some wires and after that still no vtec. Second he spliced some wires and still no vtec so now Iam left with a screwed up ecu I tried to replace the wires he took out back in there orignal place (they were a blue wire and a yellow with a green stripe if that helps) and now my car doesnt start and I leak gas from my fuel rail which never did before. So my question is how can I fix this to atleast get my car started again. For the vtec Iam just going to get a hasport subharness to makes things alot easier thanks in advance.