ive had the aem uego wideband for about a month now. it gets power and grounds at the thermostat. Recently, i bought a hondata s300 and decided to datalog with it. I hooked up the white wire to D10 on the ecu and it gets a very weird reading on the smanager. The wideband shows its reading around 12:1 A/F at idle but on the laptop, it reads around 0.78, but it goes up and down along with the wideband. Ive also verified in the settings/units area that its supposed to be displaying air fuel ratio. Ive been googling and searching for the past hour now and still havnt found a solution. Any help ?

 

nm .. i fixed it .. i changed the lambda setting to air/fuel setting but it never changed the min and max setting for me .. so i overlooked it ..