trying to decide on which cams to run
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2009
Location: elkhart
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
trying to decide on which cams to run
Ok I'm down to just ordering cams for my build and can't seem to make a decision on a set.
First set: skunk2 pro1 cams
Second set: GSC T1 cams
Build is a sleeved ls/vtec with 10:1 compression with a twin scroll manifold and a 67mm turbo with a divided t4 1.10ar exhaust housing.
Hp goal is 750-800whp but looking for a cam that will help with spool, make good midrange power and be able to carry it to 9,500 rpms. Also still be streetable..
Thanks for any input.
First set: skunk2 pro1 cams
Second set: GSC T1 cams
Build is a sleeved ls/vtec with 10:1 compression with a twin scroll manifold and a 67mm turbo with a divided t4 1.10ar exhaust housing.
Hp goal is 750-800whp but looking for a cam that will help with spool, make good midrange power and be able to carry it to 9,500 rpms. Also still be streetable..
Thanks for any input.
#2
Honda-Tech Member
iTrader: (12)
Join Date: Nov 2007
Location: carlisle, pa, usa
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
I'm in the same boat , T1s r on back order till July and I can't find a set anywhere. Good luck if u decide on them. I may end up getting pro1s even tho I sold my pro1s to try another set. Another option would b kelford 176-t.
#6
Honda-Tech Member
Thread Starter
Join Date: Nov 2009
Location: elkhart
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: trying to decide on which cams to run
#7
Honda-Tech Member
Thread Starter
Join Date: Nov 2009
Location: elkhart
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#11
Honda-Tech Member
Join Date: Apr 2006
Location: TX
Posts: 1,400
Likes: 0
Received 0 Likes
on
0 Posts
Re: trying to decide on which cams to run
#12
Honda-Tech Member
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: trying to decide on which cams to run
GSC's ! If you can find them. Thought i had seen a set for sale on FB in the SFWD community page. They perform very well in my car. Myles quit bogarting all the cams and selll a pair to the OP lmao
#13
Honda-Tech Member
iTrader: (1)
Re: trying to decide on which cams to run
I am thinking of trying GSC for my next tuning session, but I haven't seen a lot on them as much as with the skunk 2, I currently have Crower and can't wait to take them out, seems the car was choking closer to 700hp so all I left the dyno with 662hp. I went trying to get 800hp.
#14
Honda-Tech Member
Thread Starter
Join Date: Nov 2009
Location: elkhart
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: trying to decide on which cams to run
i got mine about a month ago from Real Street on ebay, great price too! it says they have some sets left http://stores.ebay.com/Real-Street-P...p2047675.l2563
#16
Honda-Tech Member
Thread Starter
Join Date: Nov 2009
Location: elkhart
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
#17
Honda-Tech Member
#24
Honda-Tech Member