what should a 115mph trap speed be good for in the 1/4.

 

well the guy that owned the car before me ran a 13.21 @ 115mph.

 

the car has Weitec Coilovers, and 16? Dunlop SP Sport FM901.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -vdub- &raquo;</TD></TR><TR><TD CLASS="quote">what should a 115mph trap speed be good for in the 1/4. </TD></TR></TABLE>

high 11s, low 12s on slicks depending on driving,60fts, etc..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99lspwr &raquo;</TD></TR><TR><TD CLASS="quote">high 11s, low 12s on slicks depending on driving,60fts, etc..</TD></TR></TABLE>

but since the laws of drag racing physics dont apply to frank, he should net a 4.30 with a 115 trap speed.

he hee j/k
i have to bust his *****.

low 12's high 11's like said, but it depends strongly on your setup. a large turbo will come on stronger upstairs. depends on alot of things.

 

this is the motor it has a Garrett T3/T04E 60 Trim.

 

dude thats cool

 

Traction, powerband, like everyone has said. Could run high 11's or 12's. I ran 11.7@115 with a 1.7 60ft.

 

i actually went 11.81 @ 118 with a 1.60 shorttime.

 

depends on the 60's but could be good for anything from mid 11's to high 12's.

Z06 traps 115 and on street tires with 1.8-1.9 60's go 12.0-12.5's. slicks and 1.6's go's 11.7-11.8's or so.

 

so with slicks a would probably be in the high 11's low 12's.
then if I turn my boost up another 7psi I should be able to run low 11's to high 10's right.

 

there is only one way to know for sure.

 

yep... drive your *** off at the track and you will know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir &raquo;</TD></TR><TR><TD CLASS="quote">i actually went 11.81 @ 118 with a 1.60 shorttime.</TD></TR></TABLE>

yeah that was in the ummm, eg hatch with the t-type motor right!!??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99lspwr &raquo;</TD></TR><TR><TD CLASS="quote">

yeah that was in the ummm, eg hatch with the t-type motor right!!?? </TD></TR></TABLE>

no no no. that was the john deere with the banshee motor.

actually it is in my t type. sorry should have elaborated.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dunkd &raquo;</TD></TR><TR><TD CLASS="quote">there is only one way to know for sure.</TD></TR></TABLE>

amen to that.

 

can someone move the hell over. this BENCH is getting too full

 

11.8 @ 116
24.5 x 7 - 13 slicks
2650lbs

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic &raquo;</TD></TR><TR><TD CLASS="quote">can someone move the hell over. this BENCH is getting too full </TD></TR></TABLE>
hahahahahahaha


i went 12.2 @ 114 mph with a high 1.8 or low 1.9 60ft