do they really work? i have bad traction problem through 3 gear and need help
is it worth 350$ to get somthing like z10 or avid or full race or lcon

help me out

 

http://www.etdracing.com/traction.html

ETD is in the middle of a slight re-design and their new bars are AMAZING. Before you buy, I would recommend contacting john at etdracing.com in the New Year when they re-open.

Your looking at $250 for a great traction bar.

 

post this in the integra forum you will get more replies

 

lol


,,|,,

 

I have a set of Jim fabs, and no complaints so far! set them up about 2-3 degrees positive caster and my wheel hop is pretty much non existant. have had them about 3 years now

 

I've got a set of Full-Race on my car now, and wouldn't own another set. I've installed quite a few from some other manufacturers and still like my full race the best.

Clayton

 

sorry to thread jack.....but, does n-e body know if traction bars for a 92-95 civic will fit a dc integra?

sorry again

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coronadrinker &raquo;</TD></TR><TR><TD CLASS="quote">sorry to thread jack.....but, does n-e body know if traction bars for a 92-95 civic will fit a dc integra?

sorry again</TD></TR></TABLE>

yes they will

Clayton

 

i have the full-race traction bar setup and i lowered my 60ft. from a 1.80 to a 1.60...I think there worth the money..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1FSTHATCH &raquo;</TD></TR><TR><TD CLASS="quote">i have the full-race traction bar setup and i lowered my 60ft. from a 1.80 to a 1.60...I think there worth the money..</TD></TR></TABLE>
That was the only change? hmm...been contemplating traction bars myself, but didnt really think they made that much difference...

anymore before and after story's?

 

Im looking for a set as well. Need to fit a '91 CRX with a K motor in it.
http://www.speedsceneracing.com

 

and whats the story on Jim Fab????
Web site says "shop closed for awhile"

 

EMail John @ ETDRacing.com

He will tell you if his fit with a K in a CRX. His new bars are going to kick ***.... I've since the new arms and everything. Too band this stuff is going under the car.

 

Interested in some before and after experiences as well.

 

i went from 1.70 60s to 1.58to1.63 60foots from the bars and a good aliment

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vaporboy12 &raquo;</TD></TR><TR><TD CLASS="quote">i went from 1.70 60s to 1.58to1.63 60foots from the bars and a good aliment</TD></TR></TABLE>

was that the only change?

thats what im looking for, seems im allways stuck in the low 1.7's want to get to the low 1.6's

 

yes just the bar and a good aliment....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpeedSceneScott &raquo;</TD></TR><TR><TD CLASS="quote">and whats the story on Jim Fab????
Web site says "shop closed for awhile"</TD></TR></TABLE>

Not sure, i wasnt aware that he was still making products. I picked up my bars about 3 years ago?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fast2camciv &raquo;</TD></TR><TR><TD CLASS="quote">
That was the only change? hmm...been contemplating traction bars myself, but didnt really think they made that much difference...

anymore before and after story's?</TD></TR></TABLE>

I have some jimfabs i got a few years ago that i still need to put on.. i'll let you know how they do when firebird opens if you dont have some by then..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dmotoguy &raquo;</TD></TR><TR><TD CLASS="quote">

I have some jimfabs i got a few years ago that i still need to put on.. i'll let you know how they do when firebird opens if you dont have some by then.. </TD></TR></TABLE>

 

traction bar helps a lot.