What's up guys, I'm just trying to see what you guys are running SOHC wise.
I'm on a hunt to see how far I can get into the 14's (if i even can).

I ran a 15.03 @89.6 with a 2.23 60' time. I know the 60 ft can use some work.

Mods are..

freshly rebuilt d16z6
zex/comp 59300 cam
autzone intake with cheap velocity stack
ebay header
2.25 crush bent cat back to thrush turbo muffler
stock p28

also my clutch is slipping pretty hard after i run the car once, so with a new clutch (hopefully next week) I'm planning on hitting 14's.

Everyone post your set up!

 

I have a D16Y7 w:injen intake, Ebay 4-1 header,NGK cold plugs, accell wires, MSD SCI ignition, MSD ss blaster coil, msd cap/rotor, NOS super powershot dry system(50 shot), 2-1/4 exaust to a straight muffler, 97' EX tranny, Exedy racing clutch(STG1), Energy Suspension motor mount inserts,Hondata S-100 management systemW/nitrous being ran through the Hondata''--and all that only got me to a 14.2-- So, I did what I could--and i'm sure you can do alot more but I already bought a GSR block and crank w/CP 9:0:1 forged pistons...so I wanted boost and thats what I'm gonna get!

 

went 14.0 on mine

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohcproject nyce &raquo;</TD></TR><TR><TD CLASS="quote">went 14.0 on mine </TD></TR></TABLE>

specs?

 

d16y8 head port and polished
d16y7 zc piston 13:2:1 compression 100 ocatane recomned
jg cam
jg rentaniers
blox vaule springs
stock vaules
edelbrock manifold
bullfrog header
stock injecters
shot ping rods
and it is for sale also

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00_EKHatch &raquo;</TD></TR><TR><TD CLASS="quote">I have a D16Y7 w:injen intake, Ebay 4-1 header,NGK cold plugs, accell wires, MSD SCI ignition, MSD ss blaster coil, msd cap/rotor, NOS super powershot dry system(50 shot), 2-1/4 exaust to a straight muffler, 97' EX tranny, Exedy racing clutch(STG1), Energy Suspension motor mount inserts,Hondata S-100 management systemW/nitrous being ran through the Hondata''--and all that only got me to a 14.2-- So, I did what I could--and i'm sure you can do alot more but I already bought a GSR block and crank w/CP 9:0:1 forged pistons...so I wanted boost and thats what I'm gonna get! </TD></TR></TABLE>

The first thing you need to do is learn how to read. The title says "SOHC All Motor Thread". The 2nd thing you need to do is learn how to type!

 

Stock Z6 with IHE and 20x8x14, 14.85 in 2002.......

Stock D16A6 with P29's & 22x8x15, 14.2 in 2000

 

nice!! an all motor sohc thread hehe

d16a6 block / d15b vtec head (ported by ME)
stock bottom end
Comp59300
Y8IM ,stock bore TB
diY CAI intake
4-2-1 crush bent header, 2 1/4 collector
stock jdm p08 ecu
el cheapo 185/65/14 tires

best e.t to date
15.066
2.431 60ft
91.28mph

if only i could get a decent 60ft hehehe

 

I went 13.6@99mph in mine about 9 years ago.

Stock block 10:1 compression D16A6, full headwork and bolt ons.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mista Bone &raquo;</TD></TR><TR><TD CLASS="quote">Stock Z6 with IHE and 20x8x14, 14.85 in 2002.......

Stock D16A6 with P29's & 22x8x15, 14.2 in 2000</TD></TR></TABLE>


What was your 60' and mph in the stock z6?

 

Circa 1996, D16A6, with dual 44mm mikunis, bisimoto cam and valvesprings, headwork, dc header, daily driven '88 crx, twm manifold, D16A1 pistons with LS rods: 12.6 all motor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bisimoto &raquo;</TD></TR><TR><TD CLASS="quote"> dc header</TD></TR></TABLE>

sweet.. me to Bisi..

 

I seriously don't give a **** what you think, the dude was asking for anybody's setups and noone was responding, so I went ahead and typed mine down- So really whats your deal? This is not a place to criticize other peoples stuff...

 

14.07 about eight years ago.

-86 crx hf
-stock d15b bottom end
-stock d15b head-milled like no tommorow
-d16a6 intake manifold and tb
-huge WEB CAM
-dc 4-2-1
-14x8x20 mt's

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00_EKHatch &raquo;</TD></TR><TR><TD CLASS="quote">I seriously don't give a **** what you think, the dude was asking for anybody's setups and noone was responding, so I went ahead and typed mine down- So really whats your deal? This is not a place to criticize other peoples stuff...</TD></TR></TABLE>

I think the reason he said something to you is because the Title says ALL MOTOR SOHC. not SOHC Nitrous setups.

 

wanna add juice?

First pass on stock Z6 I went 13.97.........ended up going 13.09 on a STOCK Z6 with just IHE, others went 12's, I ran otu of clutch.

Wil, people miss you.