ok here is my set up. i got a b16a2 with i/h/e i also have cam gears and the entire fuelsystem upgraded with aem parts as well as an act stage 4 street/strip clutch. im only running the 1/8th since the 1/4 mile track is too far away and the 1/8th is like 2 miles from my house. but anyway im launching from around 3500rpm on street tires and anything higher than that i dont even get a launch i just break loose and spin. my times are anywhere from a 9.42@80.2 mph to 9.6@79.8. i figure that the high speeds are due to the loss of traction which raises the speed but lowers the et. now i know its really bad because i seriously spin 3rd and sometimes 4th gear as i just cross the line. im assuming this is because of the upgraded clutch, seeing as i didnt have this much spin before i upgraded it. but i wanted to know what driving techniques or what can i due to reduce loss of traction and lower my ets. thanks for the help in advance


[Modified by 93hybrid, 3:52 AM 2/23/2003]

 

oh and my reaction time is normally around a .6