Selling some parts off my 90 prelude to upgrade
Located in Everett, WA
Text 360-305-0569

Sls h22 t3 topmount turbo manifold
Custom 3" downpipe.
44mm wastegate dumptube
Built to fit in a prelude but will fit in most honda chassis
Asking $900obo for the setup

Precision 6265 billet wheel Turbo, has 10k+ miles on it, wheels still in great shape and minimal shaft play.
.82ar t3 exhaust 4 bolt outlet.
$675obo

Fic 1100cc injectors only. $340obo under 2500 miles

Precision 600hp Fmic in great shape. painted black on one side.
$250obo

Custom intercooler piping with hks ssqv, all clamps/couplers- $150obo

H22 skunk2 intake manifold. $225obo

68mm throttle body- $100obo

Avcr Boost controler. $325obo

dual core aluminum radiator with shroud and fal fan. $160obo

M&H cheater slicks 235/60/15 tires with one pass, trans broke practically new. $300


Willing to ship at buyers cost. Paypal or cash pickup

 

M&W pro14. purchased but not going to use. staying with smart coils. i built a harness but never used, will also come with what is needed to build a new harness(minus the wire) and 2 sets of coils. asking $775shipped+paypal fees OBO...thanks



quick response text me 774-319-9072 justin

 

Block: ls b18b 0 miles on block
81mm
Golden eagle sleeves
O ring
Cp pistons 9:5.1
Eagle rods
Ls crank
New oem water pump
New oem oil pump
Oem head gasket
Oem tensioner
Oem timing belt
T1 block fittings
Moroso 5.5 oil pan
Oem alternator
Arp exhaust studs
Arp head studs

Head: 2001 Gsr
Port and polish
Supertech valves
Supertech springs
Supertech retainers
Brian crower stage 3
New valve seals
New keepers
Toda racing cam gears
Oem distributor
Ngk spark plug cables

Asking 3500$

 

-For sale ENDYN catch can used comes with what you see, the return fitting is a -6an. 65.00 shipped within the US.

 

Brand new ball bearing 6262 fs- https://honda-tech.com/search.php?searchid=15672881

 

For Sale: B series Competition Clutch twin disc $1000
Located in NJ
Just received back from being freshened up from CC.

 

Name: Bobby
Location: Fort Wayne, IN
Price: $15,000 OBO
Email: Bobby.lindsey1@yahoo.com

I've got my 'turn key race car' for sale

I've got a 1990 Integra for sale. This car has been a project of mine for years. I have owned it for roughly 10 years and have been heavily building it for the past 3. Below is a very short list of what's in the car. I have tons for pictures of the car I can share, just let me know what you are looking for.

Exterior I would rate a 7/10 ... its not a show car.
Interior I would rate a 7/10 also ... again its a race car.

There is nothing wrong with the car and its street legal (its just a little loud). I am ready to move onto another project and need to move this one first.

1990 Acura Integra
130k on the chassis, but nearly everything has been replaced
Made 756 hp & 536 ft/lbs @ 32 psi (this setup will easily handle 40 psi)
Car has gone 10.03 @ 155
10 pt cage
AiM Dash


Motor (built by Don at Accelerated Performance)
- Dart Block (81.5 mm stock stroke)
o CP Pistons (coated from Swain Tech)
o Crower Rods
o Eagle Crank (Knife Edged)
o Moroso Oil Pan

- B16 Head
o Ferrea Springs
o Ferrea Valves (0.5mm oversized)
o Crower Cams (Race Engineering Grind)
o T1 Trigger
o AEM Cam Gear

- Transmission (Completely Brand new when purchased)
o MFactory Pro Synchro Gears (1-4)
o MFactory 4.05 Final Drive
o Quaife LSD
o NRG Billet Bellhousing
o Assembled by Chris at Whoopee Doo Racing

- LoveFab Manifold and 4" Downpipe
- Tial Wastegate
- 64/67 Precision Billet Turbo
- Air to Water Intercooler
- Haltec ECU
- M&W PRO 14
- Car has been completely rewired
- 2000 cc ID injectors

 

FS: 2 RLZ CNC PORTED HEADS. FERREA VALVES, VALVES SPRINGS & RETAINERS. SSSSOOOOOLLLLDDDD

FS: Stock GSR TRANS FRESH REBUILD QUAIFE LSD $1400 obo

FS: 84MM GSR BLOCK, GOLDEN EAGLE SLEEVES, CUSTOM T1 SPEC JE PISTONS, GRP
ALUMINUM RODS, CUSTOM ERL CRANK GIRDLE, MOROSO OIL PAN, ATI CRANK DAMPER
$3,000obo

FS: PRO JAY 8 INJECTOR INTAKE MANIFOLD w/ FUEL RAIL SSSSOOOOLLLLDDDD

FS: FULL RACE TOP MOUNT B SERIES MANIFOLD $900

FS: 2 PRECISION 46MM WASTEGATES SSSSOOOOLLLLDDDD

FS: AEM V2 ECU SSSSOOOOOLLLLDDDD

FS: RACESPEC MILSPEC HARNESS $2500 obo (for specs pm me)

FS: 2 SETS "RS" WEB VTEC CAMS $600 PER SET

FS: WELD 2-PIECE SKINNIES NO TIRES SSSSOOOOLLLLLDDDD

PRICED TO SELL, ALMOST EVERYTHING IS BEST OFFER. PM FOR MORE INFO.

 

Sold

 

Gato Gsr manifold with 75mm edelbrock ford style tb, has one set of dummy injectors and 1 set of top hats. Priced to sell I want 750 shipped and paypal in the 48 states I also have 8 new 110lbs injectors for 400 if you buy the manifold. Pm me for any ?

 

Selling some of my parts off my race car everything fits B SERIES VTEC

MOROSO ALUMINUM 5.5 quart baffled oil pan with moroso pick up was 550 new will do 400- fits 1.8 models

Ferrea dish valves/bee hive springs 90 ft seat pressure /retainer e11000/ keepers/locators missing 2 intake/ex valves otherwise all there and complete keepers were 300 alone ill take 450- for everything

Skunk 2 tuner series cam gears 100-

call or text 7174480189 if you need more info

 

RC370cc injectors $150 (Peak and Hold)+ shipping





Paypal accepted(please include 3% fee). Parts located in Los Angeles, CA Please text or call 424-230-6503, Tom

 

*Please Read Whole ADD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.

I hate to have to go in this direction but due to some changes in my life I have to get rid of one of my cars. So with that I decided to part out my drag car. I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.

Text or PM only 1 306 551 5139

- Race motor brand new never used - $3650 shipped (Does not come with valve cover $200 more for that) *WILL NOT PART OUT. SOLD AS A WHOLE*
Benson sleeved LS-vtec engine (sleeved prior to benson engraving the block)
84mm bore
GRP billet aluminum rods
Custom ross 11:1 pistons w/gas ports
JE custom wrist pins
O-ring'd block and reciever grooves in the head
SCE Copper head gasket
Moroso 5qt oil pan

JG cylinder head GSR
cnc'd
ferrea bronze guides
JG .5mm oversized flat face valves
JG valve springs and retainers
fresh valve job and surface
Highly polished front of cylinder head looks amazing
Brand new skunk2 pro 1 camshafts




- B series PAR Dog Box Gearset 2.9/2.0/1.4/1.09 With a 4.4 Final drive and cuff support maybe 10 passes with brand new M-Factory Diff installed in a re-endforced case - $4650shipped






Chase Bays CM1 Engine Harness - sold



AIR Carbon Fiber intake manifold(Fits both gsr and b16 heads dual bolt pattern) - $900 Shipped
B series Carbon Fiber Valve Cover - $400 shipped



B series Oil Catch Can, Comes with valve cover, 4 lines(2 for head and 2 for block), and oil catch can - sold

Sprinwerks Slicks and Skinnies *WILL NOT SPLIT THESE UP DON'T ASK*
Fronts are 26x10x15 with bead lock(4x100 bolt pattern)
Rears Skinies are 25x4.5x15 (4x100 bolt pattern)
SOLD

Fuel System - 800 shipped
- 2x Bosch 044 with relays
- -8an Feed and return braided lines
- 5 gallon fuel cell




- Precision GT4294 journal bearing, 4" V-Band . Rated for up to 850hp, small chip in one fin *see picture* - $650 shipped plus paypal




- Garett 950hp Dual Back door intercooler(core size is 3.5"x12"x24") with 3" piping flanged for a tial 50mm BOV- The outlet piping on the front mount was squished a bit during shipping when I received it. This set up is used. - $490 shipped



- 4" Aluminum exhaust for EG Hatch, 3" vband with clams, one spot was cut for shipping purposes and will have to be re-welded or put a new vband clamp on it. There is a dent on the tip of the muffler from shipping. (please note the exhaust is not properly lined up for the picture - SOLD

- KOYO aluminum Rad with 12" mishimoto fan and hoses with Rad cap (ALL BRAND NEW) sold

- 2.5" steel cold side piping with clamps NO BOV
Front mount intercooler roughly 20"x9"x3" (made 475hp no problem) - SOLD

- AZ racing GSR Girdle - $80shipped


- Eg traction bar (garage built so not the nicest) - $100 shipped



- J's Racing CF air Duct for EG (passenger side) -Sold

Sorry for not having my name in all the pics. I recently packaged everything up to move but can take better picks for people who are only seriously interested. The only different from the parts now compared to when I took these pics are they are now in packaging ready to ship.

 

For Sale: 99 SFWD EK Shell

I have for sale is a 99 SFWD shell. Shell has no rust and in great condition. The hood and bumper could use paint.
10PT cage with parachute done by Gato performance in Orlando Florida. Cage has been certified.
Car has full dash and neatly fitted with cage along with carpet
Suspension Buddy Club Spec N+ with Skunk 2 Caber kit front and rear.
Wheels: Rota Slip Streams 16'' which will come with car. Also have Welds 13x9 with slicks with 20 hits and spin-work skinnies with tires which will be additional price.

Asking price: $4700
Asking price with Welds and spin-work skinnies: $5800

Located in Palm Bay Fl

 

S2000 engine complete parts
CP Pistons
Eagle Rods
Ferrea Roller rocker arms
Cylinder head has Ferrea beehive valve springs/valves/retainers/etc... also decked
F20 Block sleeved by Inline Pro closed deck-oring/bore/hone deck with timing cover etc...
ACL main and rod bearings
ARP head studs

All parts are solvent/hot tanked/ultra sonic cleaned via our Safety Kleen machine process, (spotless)

F20 s2000 engine is not assembled as customer ended up changing directions to a v8 project :-(.

$9800 obo/trades etc...for engine assembly/transmission/acid dipped bare metal rolling chassis

I am willing to separate engine assembly from rolling chassis if needed.

make trades/offers call or PM for details!










EK Civic Acid Dipped with chromoly tig welded roll cage rolling chassis

$2999 - call or PM for details


H23A sleeved block already bored/honed/decked ready to assemble
JE 9:1 comrpession pistons and ASC forged connecting rods
all parts are brand new and can assemble if requested
$1999




Tex Blackwell
B.R.E. Motorsports, Inc.
Concord, NC 28027
704-723-9235-shop
980-521-2224-cell call/text

 

For Sale. Precision PTE4508 custom. 82MM wheel, T4 flange. Your choice of AR. 1.12 or 1.28. It's on ebay. 1800.00 here, or bid on it to see the reserve.

Precision PTE4508 Turbo Honda 2jz Garrett Eaton Mustang PTE8280 | eBay

 

SOLD

 

Used polished B16 edelbrock intake manifold ported by endyn with skunk2 pro series 70mm throttle body. No sensors, and map has been welden on TB see pics
combo $500 obo shipped
AEM infinity 8h decided to go a different route box opened never used $1250obo shipped

text 8179921706 for faster response

 

FS:
Cylinder head-$700 shipped in US.
Bottom end-$1850 shipped in US.

B16a2 cylinder head-56k mile head. Stock ports, 5 angle valve job, Ferrea 6000 std size valves, supertech springs and retainers. Very clean head. Has about 10 miles on it since valve train was done. $700 shipped in US.

B16a2 83mm AEBS sleeved and O ringed block. Pauter rods, Ross 8.5:1 pistons, z10 girdle, AEBS main studs, gsr pickup and oil pan with -10an drain. Oem water pump and ITR oil pump. $1850 shipped in US. Has less than 3000 miles on it, 75% of which were all motor and never saw wot. Most of the rest were at 250whp besides the last 10 miles or less at 500whp on e85. Never revved over 9500.

 

For sale!

-Benson sleeved 89mm h22 block (used) W/ brand new main bearings.
its already notched to clear DSS 5.9 axles on an H2B car and has the bse plugs in the girdle and was line honed at the time of sleeving.
Comes with crank
$850(no oil pan)


-Manley turbo tuff h22 rods (1000hp) w/ ACL race bearings $750

-brand new h22 oil pump w/ bse plugs $190

-brand new h22 water pump $70

-stock h22 head, w/cam caps and vtec solenoid $150

*will make a deal for someone who wants it all.

PM or text me @ (541)571-5126

 

BNIB turbosmart 60mm wastegate

BNIB turbosmart 50mm bov

package deal for both 600+shipping, wont let me upload pics so either text me at 914-4six9-1635 or email me at rwdk20@aol.com. thanks for looking

 

Turbo smart 60 mm wastegate

Turbo smart 50mm blow off valve

600 package deal or 450 for wastegate and 225 for bov

 

Borgwarner s366 brand new t4 twin scroll with a 91 hotside 650+shipping

 

Golden eagle sleeved B20z just got back. 1150 shipped
Gsr crank (have oem bearing forblock and crank) package deal



[/URL]


New in box 46mm pte WG $300 +shipping [/URL]

 

Selling parts that have been laying around.

-AFI B-series Top mount T4 Twin 44mm wastegates setup only used for a year, replaced one wastegate flange was replaced because it was warped. (wastegate NOT included) $850
-Hondata Kpro NEW with NEW PRB. Customer brought new then went MoTeC. He paid $1320, wants $1000.
-FJO injector driver with 1600cc injectors. Used, but came out of a working a car. $450