SPEEDFACTORY DRAG CIVIC 8.6 RUN
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Spokane, WA, USA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Honda-Tech Member
#10
Honda-Tech Member
Re: SPEEDFACTORY DRAG CIVIC 8.6 RUN
Thanks guys! 50psi dropping to 47 on that pass. We had issues with the car dying off the line all day and this was the first pass of the day that it actually left.
I just threw too much power at it to make sure it got off the line. Terrible short times but man it was haulin up top. I have in-car I'll put up later.
I just threw too much power at it to make sure it got off the line. Terrible short times but man it was haulin up top. I have in-car I'll put up later.
#11
Honda-Tech Member
Re: SPEEDFACTORY DRAG CIVIC 8.6 RUN
That is S I C K!!!!
Well done guys.... Congratulations to the entire team!
What changed from the last time @ the track?
Fernando @ Kings Performance
Well done guys.... Congratulations to the entire team!
What changed from the last time @ the track?
Fernando @ Kings Performance
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Spokane, WA, USA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: SPEEDFACTORY DRAG CIVIC 8.6 RUN
Thanks guys! 50psi dropping to 47 on that pass. We had issues with the car dying off the line all day and this was the first pass of the day that it actually left.
I just threw too much power at it to make sure it got off the line. Terrible short times but man it was haulin up top. I have in-car I'll put up later.
I just threw too much power at it to make sure it got off the line. Terrible short times but man it was haulin up top. I have in-car I'll put up later.
#23
Honda-Tech Member
Re: SPEEDFACTORY DRAG CIVIC 8.6 RUN
I had the car into the 1.4xx sixty ft range in Vegas, but had problems getting the car to launch all day, it just kept falling on it's face. This was my 3rd try of the day, so I finally just left with too much power to make sure we at least made a pass. That is the reason for the crap short track times.
I hope to put the two together in the next few outings here. Then move away from the Pro1 cams and see if we can't find abit more power.
Just got the in-car vid up:
http://youtu.be/CUGGXsqibUQ
Last edited by JFK78; 05-29-2012 at 10:57 AM. Reason: DA probably incorrect