When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts! 2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it. 3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned 4) NO WTB ADS! 5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE 6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
-AFI B-series Top mount T4 Twin 44mm wastegates setup only used for a year, replaced one wastegate flange was replaced because it was warped. (wastegate NOT included) SOLD
-Hondata Kpro NEW with NEW PRB. Customer brought new then went MoTeC. He paid $1320, wants SOLD
-FJO injector driver with 1600cc injectors. Used, but came out of a working a car. $450
Last edited by Turbogixxer; Oct 29, 2014 at 05:41 PM.
Made some changes to the car and have some parts that i need to sell. Feel free to text for a quicker response 7578182917.
Hasport Motor mounts for 92-95 Civic and 94-2000 Integra. Mounts are basically new, they were used for mock up then changed out to solid billet mounts $240
BNIB Skunk2 rear LCA's for 92-95 Civic and 94-00 Integra. $180
Skunk2 Dual Bend short shifter and weighted ****, fits 92-00 Civic and 94-00 Integra. $120
MoTeC Ignition Expander module, brand new never used. $300
Last edited by NAVY AWS; Oct 23, 2014 at 03:33 AM.
Name: Joe
Location: Richmond, VA
Contact: 804-337-8376
For Sale:
Brand NEW Crower 1mm Oversize Intake Valves and .5 Over Exhaust Valves - $SOLD
Used GSR GRP aluminum rods with ARP 2000 bolts and use an .866 wrist pin. $275
CP Pistons 83mm 9.0:1 compression. With fresh high temperature ceramic top coating and Molly skirt coating. Includes all locks, wrist pins, new ring set and spec sheet. Three pistons are used (200 miles) and one is new. Used pistons were shipped to CP and hardness checked by a CP engineer before coating. Will include all documentation. - $350
Last edited by C16efsedan; Oct 20, 2014 at 10:21 AM.
CNC machined bungs and filter tubes
Interanally baffled design to keep oil inside breather tank
Fully tig welded
Anodized Black
Laser etched logo
3 Earls Ano Tuff -10 Caps Included
3 New Filters with Chrome Tops as pictured Included
Brand new, never used
Stainless Steel
Megaphone with reverse cone
Anti reversion chambers on each runner
O2 bungs in each runner and 1 in megaphone
4 ports matched plugs for each O2 bung when not in use
3 step header design - 1 3/4", 1 7/8", 2", 2 1/8" exit
No waiting several weeks for a race header, this one is ready to go
The Karcepts Shifter Mounting Kit provides the SOLUTION to mounting an RSX style shifter box into K-Series powered Civics and Integras. It positions the shift lever in the stock factory location and maintains all factory interior trim for a clean OEM look.
Part #: KSM01 for 92-00 Civic (non-Del Sol) & 94-01 Integra Chassis
High quality laser cut stainless steel construction
Instructions Included
All hardware Included
RSX Type S shift Box & Cables - $200 FREE Shipping
Used shifter box and cables in excellent condition
Box already trimmed and ready for install in a swapped car or great spare parts to have
Last edited by crxmanror; Oct 13, 2014 at 09:25 PM.
Used polished B16 edelbrock intake manifold ported by endyn with skunk2 pro series 70mm throttle body. No sensors, and map has been welden on TB see pics
combo $500 obo shipped
AEM infinity 8h SOLD
text 8179921706 for faster response
Last edited by turbo-2nr; Oct 21, 2014 at 08:05 PM.
BMC Race Intake Manifold ( B16/ITR B series head ), comes with Accufab 90mm Throttle Body ( includes TPS & Vibrant Vanjen Flange Welded On Throttle Body ) 1000.00 Shipped & Paypald
Free shipping within lower 48 - please add 3% or gift
Home ported GSR head
Supertech black nitride flat faced valves
KMS springs
KMS titanium retainers
extended exhaust manifold studs
comes with cam seal
(NO VTEC SOLENOID)
$600
ATI superdamper for Bseries
$300
Edelbrock victorX GSR manifold
(comes with all fittings and thermal gasket)
$250
M&W pro14. purchased but not going to use. staying with smart coils. i built a harness but never used, will also come with what is needed to build a new harness(minus the wire) and 2 sets of coils. asking $775shipped+paypal fees OBO...thanks for quick response, text me 774-319-9072...justin
Bmc race b-series intake for sale was reinforced at bmc before having been anodized black and the runners are polished, comes setup with a Honda throttle body flange and it's a 4 injector setup
New in box 76mm billet throttle body, new 3" vanjen clamp assembly and new 3" charge pipe
1400 takes it all
Description of item: Jack Myers Custom K series "LEAN MOUNT" Header Condition: Brand new, Never mounted. Location: Stoneville, NC 27048 Contact: Phone 336-932-2023 or Email levantimothy@gmail.com
Up for grabs is a Jack Myers Custom Header designed for either Norris Prayoonto's Lean Mount Kit or Jack Myer's Lean Mount Kit. I had the header built for a 90x99mm setup but this header will work well with larger displacement engines as well. There are two chokes included to dial in the power on the dyno. 2.25" and 2.375". Without a choke the diameter is 2.5"
THIS IS A FENDER EXIT HEADER!! Therefore, a hole needs to be cut in the unibody/fender at the OE battery location to allow the megaphone/turn-back to pass through the frame and out the fender.
This header was designed for a serious All Motor drag car. This is not your typical copy/paste Chinese under-the-pan header. Jack's craftsmanship is untouchable in the import header world (in my opinion) and the quality of his work speaks for itself.
See LeoG Werks picture below. This shows how the header passes through the frame:
Same Header design and fabricator as the header listed forsale.
If you have any questions, please post, email or call.
-Tim
kazera kz-m 15x7 4x100 +25 wheels in great shape.
1 rim a very small rub mark on the lip but other then that no cracks/bends. Come with a set of used Hoosier a6's. You be the judge of how much life is left because i have never owned a set and dont know how long they last but i would assume at least a track day or two
$400obo pick up only
500hp Insane shaft B series axles with DA intermediate shaft, 100 miles and 4 launches these axles are flawless
$400obo + shipping&paypal fee's
I have two sets of of Cardone B series DA axles. one set has 10k miles on it and the other set is brand new. These are by far the best OEM aftermarket axle you can buy they are BRAND NEW not Re-manufactured autozone crap
Used set $60
New set $140obo
+ shipping&paypal fee's
FullRace EF size radiator used for approx 500 miles WORKED flawless. My turbo car did not overheat once even in traffic on a 100 degree day
$200 picked up or $215 shipped + paypal fee's, These are $330 on full races website.
v2 competition wheels 13x8 4x100 factory black finish with 24.5x8.5x13 MH slicks with approx 25 passes on them if that. LOADS of life left. both rims have minor scrapes on the inner lip because they got test fit on a car with "drag" knuckles and they didnt clear but didnt realized until i rolled the car back so it scraped the paint off a little, strictly cosmetic"
$500 local pickup only
Hasport EF B series mounts for hydro transmission with newer 88a inserts installed with approx 300 miles on the new bushings. Included but not pictures DA rear T bracket.
$190 shipped +paypal fee's or $175 picked up
Also have used Fluidyne civic/integra half size radiator. its old and used but does not leak and works just fine. $80 picked up $100 shipped +paypal fee's
All parts located in Chicago area. fastest way to get a hold of me is by Text 872-237-1803
Not open to trades unless its a sleeved b18b/b18a block 81mm bore in GOOD shape with papers. or 96-98 civic EX manual uncut engine harness.
Selling my AEM gauges. I have only mounted the gauges and ran power to them. None of the sending units have been used. No scratches or scuffs. All beauty rings and face plates included still in the box.
SOLD
Last edited by Javlin42; Oct 30, 2014 at 06:54 AM.
Oct FS Thread
