Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!

2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.

3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, all your posts in the FS sticky will be deleted and you will have % points docked.

4) NO WTB ADS!

5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE

6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here

 

Prices do not include shipping or Paypal charges unless otherwise stated. I might consider some trades, just let me know what you have to offer. More pictures upon request, sence they only allow 20 pictures per post.


88 Honda CRX SI rolling shell clean title. This car has been family owned, my dad bought the car brand new from a Honda dealership back in 88. What’s all included: NHRA certified chromoly cage, Moroso battery box, Shut off switch, jdm type-r cluster, fake spoon steering wheel, sump fuel tank with one -12 line 3ft long off the sump, one -10 line 2ft connected to a magnaflow splitter with two -8 lines ran to the engine bay also one -8 return line, front extended wheel studs, stainless steel brake lines all around, tilton master cylinder (car has been converted to hydraulic), wings west body kit and fiber image hood with a little damage on it. Car is street legal, all headlight and turns signals work. $3300.00


CLICK ON PICTURES TO ENHANCE IMAGE







Here is some pictures of when the car was running.




Used Motec M4 with all options unlocked. Comes with data cable, baro sensor, distributor, o2 sensor and the motec Honda harness. Harness is missing a few connectors: est, positive battery, baro,wastegate, map, aux temp. $2600.00 OBO




Set of Bogart wheels with MH Slicks $1000.00
*Frt. 13in wheels 8.7/25-13 MH slicks
*Rear 15in wheels 3.6/24-15 MH DOT Skinnes




Simpson Bandit Helmet Large SA2000 date of MFG:02/05 $250.00




Impact Racing Jacket and Pants size: X-Large SFI 3-2A/5 Approved. $375.00
For more info: http://www.jegs.com/p/Impact+R...02/-1





JDM GSR hydro tranny W/OBX diff. $700.00 FIRM (Pick up only)







B series v-tec NGK spark plug wires W/MSD cap and coil wire $50.00



B series starter $50.00 each



B series half shaft $75.00 each



Was used for oil pressure. Part number off the sensor
35-2114
P158-5198-4
D1204-023
125 psi pressure sensors
Comes with pig tail $75.00 OBO


Was used for nitrous. Part number off sensor
P195-2000S-E3A
E1004-019
Comes with pig tail $75.00 OBO

Complete turbo kit made for a CRX. Kit includes: Inline pro T4 manifold with a Tial V60 (1 bar spring) with dump tube, Burg Warner S372 turbo with 4in down pipe and -10 oil return line and -4 feed line, Edelbrock intake manifold (b16 or Type-R head) with 76m Blox T-body, 3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom intercooler (precision core 24x12x3). $3600.00




Complete long block. Motor has very low miles only made it to the track less then 8 times this year. LS block with Golden Eagle sleeves, head studs, mains, girdle, head gasket, golden eagle vtec conversion kit, block is bored 81.5 with Eagle rods and JE pistons 9-1, Type-R head port and polish with 1m over size supertech valve’s, retainers and springs, crower turbo cams. $3500.00
Compression Test
COLD WARM
1) 200 210
2) 185 200
3) 200 205
4) 195 210


M&W PRO-10 with harness $450.00

 

NLR AMS-500 $350
Almost new. was used on the dyno, bought and tuned by Tempest.

http://i169.photobucket.com/al...1.jpg

Full-Race Vacuum block (BRAND NEW) $40

Thanks




Modified by turboed4dr at 4:50 PM 11/2/2008

 

Selling off my race car parts.
*Clutchmaster twin disc B-series fresh from clutchmasters new spacer disc $850.00
*Harwood fuel cell 12"x12"x 6.5" comes with -8 fittings $50.00
*Eibach 1100lb springs 8" tall $100.00 for both
*Hondata S300 in P28 $600.00
*Innovate LM-1 wide band o2
*TWM 52mm h22 itbs $1200.00
*F20b long block with Crower 3 vs/ret. $1300.00 (no exaust or intake manifold)
*H22a short block $400.00
*Lots of H parts and trans parts/casings











Lots more to sell will post soon. Pics will be up shortly.

 

Vibrant Timing Belt Tensioner
Brand new in package. Purchased it for my second motor and never used it.
Works on any B-Series engine.
MSRP is $215
$125 + shipping & 3% for Paypal. (BRAND NEW)

Also have a used B-Series Tensioner from my old Motor
$95 + shipping & 3% Paypal (Still in Mint Condition)


Putting a hold on my K-Series EG Project and have a bunch of BRAND NEW parts to sell.



K-Series Fuel Rail in SILVER (Brand New) in Box
$100 Shipped + 3% Paypal



Billet Adjustable Swivel Neck for K Series.
More Info can be found at http://www.k-tuned.com/kthermostat.html
$130 Shipped + 3% Paypal


K Series Waterpump Pump Block Off Plate with Alternator Kit and Belt.
This is the first Kit which K-Tuned Sells on their site @ http://www.k-tuned.com/kwater.html
$180 Shipped + 3% Paypal



K-Tuned K-Swap Traction Bar for 92-01 Civic and 94-01 Integra
** Will also work with D and B Series Cars **

BRAND NEW IN BOX
$280 SHIPPED + 3% Paypal

 

turbo for sell priced to sell pics and info in here http://jdmcity.com/showthread.php?t=3935

 

FS

Precision 1000cc injectors. used 2 seasons work great, 220 obo or trade towards 1600cc.

foreward facing turbo mani and DP. t3/5bolt. mani and DP are heat wrapped. 550 obo


disassembled or assembled B16 shortblock. parts are used. comes with
either a GE sleeved B16a 81mm block or clean B16A2 block (pm me)
Arias flat top 9ish:1 pistons upgraded wrist pins and NEW 81mm rings
Manley turbo tuff rods
balanced, micro polished, champhered oil ports b16 crank
New ACL main, rod and thrust bearings.
ARP main studs
arp head studs
oem oil pump, water pump, timing belt etc
all parts were new last winter.
whole assembly had like 30 dyno pulls and 6-7 track passes.

 

m&w pro14 box used for 4 events and twice on the dyno asking 850 shipped still new

 

**Up for sale is a Full-Race 3'' down pipe For use with B series bottom mount prostreet manifold only. The down pipe is in near perfect condition...

**For sale also is a T4 Inline Pro manifold Ported out for a T4 turbo. Cheap!!!!! Must Go...

**BRAND NEW GRP aluminum rods for sale for 84.5mm bore. For LS/ B20 motor. 450.00 please add 3% paypal fee's.


**Thermal R&D 3'' exhaust for Integra 3 door F/S exhaust was cut at the circle indicated to add the additional 3'' pipe to reach the down pipe. This is great for a full 3'' turbo exhaust, no need for test pipe.

 

Like the title states. Used for 4 1/4 mile passes and some idling. Practically brand new. $1500 shipped. Both housings are powedercoated TurboX black.

Here are some pics.

 

bosch 1600's only used for about 15 passes on the dyno.SOLD
aem injector driver. used on dyno only $240 shipped
aem 1040 $800 shipped
full-race twin scroll manifold dp and dump tubes. $1250 shipped


tial 44 waste gate. used for about 500 miles $230 shipped
nlr ams 1000 used on dyno only $725 shipped

Hasport efb2 kit for hydro trans. the rear mount is still on my crx so i didnt get a pic of it but will be included. $325shipped
Hasport ef shift linkage $75 shipped or mounts and linkage for $375

autometer phantom tach $75 shipped


greddy Type rs bov $100 shipped




Modified by 1QwIkEf at 8:38 PM 11/4/2008

 

add 3%paypal

New Rc750cc injectors $275 shipped

Msd6al,msd 2 step module and msd coil USED $250.shipped

 

!!!Garage Sale!!!

If interested in anything please contact me via PM. Thank you!


Ferrea Roller Followers $700.00




Crane cams roller camshafts (Turbo grind) $500.00



Circuit Worx Final drive 4.72, only 5 passes on it, like new! $600.00




B series intermediate shaft 99 CRV $50.00



AEM 3.5bar (50psi) MAP sensor with wire harness $100.00



95 GSR intake manifold air temperature sensor $20.00



Hondata heatshield intake manifold gasket $30.00




[B]Sparco 5 firesuit, size euro 54, color white/blue trim, SFI 3-2A/5 rated - $400.00
link to Sparco sizing chart http://sparcousa.com/resourceFiles/29.pdf[/B]




[B]Sparco GP2 race gloves, size euro 9 small, color black/grey- $60.00
Sparco sizing chart link http://sparcousa.com/resourceFiles/17.pdf[/B]

 

just call, text or pm 801-628-5084
Parting out my 95 honda civic hatch dx (clean title) sfwd race car. Most of the parts are brand new and have never been installed on the car. My loss is your gain! Parts will be noted below if new or in barely used condition.
Please no trades

There is much much more that is not listed or forgetting

Buyer pays all shipping and 3% PayPal fee

VEHICLE:
95 honda civic hatch dx (clean title) sfwd race car shell graphite gray, Full NHRA certified 8pt chromoly cage, GSR caliper upgrade 8 passes, spc front camber upper control arms, energy suspension urethane kit, Tokico ground control w/ skunk2 springs, Battery shut off, diest parachute cable with handle, Dss stage five hubs and arp extend lugstuds, Stroud window net cert for another yr(brand new!) Full-race fuel sump, digital 6, plx wideband, autometer gauges w/pod omni rear lower control arms
2995.00

ENGINE:
Gsr p72 head ported +polished by golden eagle(brand new!)SOLD!!!
Supertech valvetrain(brand new!)SOLD!!!
Golden Eagle gsr sleeved block 84mm b18c brand new never been started!SOLD!!!
Golden eagle headgasket 84mm(brand new!)SOLD!!!
Greddy kevlar timing belt(brand new!)SOLD!!!
CP pistions(brand new!)SOLD!!!
Manley Rods (brand new!)SOLD!!!
Arp rod bolts(brand new!)SOLD!!!

Black anodized golden eagle fuel rail(brand new!) 110.00
1600CC precision injectors (brand new!) SOLD!!!
Bdl 72mm tb(brand new!) 350.00
Edelbrock intake manifold(brand new!) 290.00
Full-race pro am t4 twin scroll turbo manifold coated SOLD!!!
Tial 44mm wastegates x2 (brand new!)SOLD!!!
Tial 50mm blow off valve(brand new!) SOLD!!!
Garrett GT4294 a/r 1.15 w/flanges(brand new!) SOLD!!!
4" alluminum exhuast rear exit with burns muffler all VbandedSOLD!!!
Moroso catch cans(brand new!) SOLD!!!
Pwr radiator SOLD!!!
Aem 5-bar map sensor 75.00
Avid solid motor mounts(brand new!) 300.00
GSR cams w/stock cam gears 75.00
msd pro cap and rotor 35.00
resistor injector box 40.00

TRANSMISSION:
GSR Transmission (new gears 0 miles brand new!) 550.00
Maxworx scattersheild (brand new!) 125.00
Quaife lsd (brand new!) 750.00
Dss stage five spare axle drive side female bseries 350.00

FUEL SYSTEM:
Full-race fuel sump sold!!!
Aeromotive Eliminator fuel pump SOLD!!!
Aeromotive fuel filters(brand new!) SOLD!!!
Aeromotive Fuel Pressure Regulator (brand new!) 95.00
All stainless lines w/earl fittings SOLD!!!

SUSPENSION:
Full-race Pro AM Traction Bars (brand new!) SOLD!!!
Omni rear lower control arms(brand new!)180.00
Energy suspension urethane kit 100.00

EXTERIOR AND WHEELS:
Simpson parachute SOLD!!!
Spoon style carbon fiber duckbill wing(brand new!) SOLD!!!
2 lips, color matched ctr lip and black urethane mugen 50.00 each
Weld racing wheels 13x8 with anodized black centers w/polished lip mt slicks SOLD
Mickey Thompson 24.5x9x13 slicks 5passes two setsSOLD!!!
5 x 114.3 black w/polished lip 17" rims with yokohama es100 80% tread 275.00

INTERIOR & ELECTRONICS:
Momo steering wheel with quik release nrg hub 195.00
Delsol seats 250.00
Stroud 5pt harness cert for another yr(brand new!) SOLD!!!
Hondata s300 with boost option w/ecu(brand new!)SOLD!!!
PLX wideband
MSD digital 6 (brand new!) 275.00 each
MSD hvc 2 coil(brand new!) SOLD!!!
MSD blaster hvc coil 75.00
Autometer gauges and center vent pod, oil pressure and boost 50.00 for each gauge



















Modified by Dwolt226 at 4:50 PM 11/4/2008

 

I am parting out my SFWD .. Thanks

Here is what I have... Buyer pays shipping and paypal fees... Pictures available upon request...
--1994 Yellow Acura Integra GSR with Type R front end conversion(all OEM Metal Panels) NO ENGINE AND TRANSMISSION, 6 point roll bar, HID headlights, Corbeau seats, magnaflow 2.5" exhaust, Tein super street dampner's.. NEw rota 15" slipstreams (black with red lip) and Flakin Z tires.. $5500.00


-Garrett GT4294R (70 mm) with 1.15 a/r exhaust $900.00
-Miezier Electric Water Pump with block off for water pump (complete kit including hoses) $ 250.00
-AEM 1060 (Hal effect or stock ignition setup) $ 800.00
-Weld race light skinies with M&H 24" tires - $ 200.00 ea.
-Forward facing turbo manifold, dump tubes, front mount intercooler, 4" charge pipe, tial 50 mm BOV, 90 mm accufab throttle body, and edlebrock intake manifold, 4" down pipe- $ 2000.00
-Mazworks scatter shield- $150.00
-B16 transmission- $500.00
-LS short block (stock) complete with moroso steel pan- $250.00
-crower 402 all motor cams $250
-Magnafuel 750 fuel pump, 2 fuel filters (100 micron stainless), 10 an feed line, 6 an return $ 500.00
-High Tech Turbo Manifold with 40 mm HKS wastegate and dump tube (t3)- $400.00
-FAL single fan shroud and motor, no blade (blue)- $30.00
-2 piece aluminum catch pan (NHRA Legal) $50.00
-Rear t bracket for b series $30.00
-Front suspension froks (set) $20.00
-Edlebrock fuel rail $50.00
-JDM 1 piece del sol headlights $200.00
-Carbon fiber del sol Hood OEM- $100.00
-MSD pn6562 Boost retard controller $100.00
-MSD pn8912 Tach adapter (2) $25.00
- Nippen denso 550 cc side feed injectors, new (6) $25.00 ea.
-GM boost controller siliniod with wire $20.00
-Moroso 1 quart aluminum overflow tank $30.00
-Tech edge wide band with ntk sensor and display (2 units) $180.00 ea.

Again pics are availble upon request.. or you can call me...

 

FS-all prices are Best offer, buyer resposible for shipping
-AEM EMS PN 30-1010 99-00 civic and some integras-700.00
-Precision 1600cc injectors-flowed last winter by precision-300.00

-99-00 civic bseries dizzy OEM honda-200.00

-S372 turbocharger/has maby 10 track pulls on it, min condition/new style race cover, with 1/4 tap for air fitting in cover/1.25 hot housing-1200.00

-99-00 civic b series shift linkage with energy sus busihings-100.00

-gsr trans with welded diff/scratches 2/3 gears/ make offer

-Aeromotive Eliminator pump-good condition-350.00

-NLR AMS 1000-complete with/w/o co2 bottle and cage bracket 700w/o/800 with

-msd 6al-works fine-100.00

-2 msd blaster ss coils, one red one black 30.00 each

-2 msd coil drivers, used with msd dizzy 100.00 each new

-all 4 ek suspension tokico blues with ground control sleeve over coil overs-no springs-100.00

-z10 catch can, with -10 fittings and lines to front of valve cover-100.00

-AEM wideband, non gauge type with sensor-100.00

-Aeromotivefuel press regulator -6 in and out-100.00

-ek gas tank with full race sump installed- sold

Modified by vtekthis at 7:51 PM 11/2/2008


Modified by vtekthis at 7:27 AM 11/6/2008

 

AEM EMS obd1#1000-0356 works great. set up for cam trigger. going in a different direction $600.00 firm or trade for s300

 

FS-
~ Two (2)Mickey Thompson Slicks 22/8/15 BNIB
~ Two (2)Hankook Ventus HRII Tires 205/50/15- Less then 100 miles on them
~ Skunk2 Pro Series Intake Manifold for GSR BNIB
~ Full-Race Adjustable B-Series Cam Gears about 20 dyno pulls only!
~ Two (2) GSR Throwout Bearings BNIB
~ Blox Racing Lug Nuts 16 BNIB

Located in NJ. Please PM with any questions.

 

Selling my setup to go bigger

Turbo parts have 6-8 track passes and dyno time on them...never street driven This setup made 550ish HP and ran a 10.4@136 in the quarter mile

Percision SC6152E a/r .63 rated to 620hp
Turbo and 3in Downpipe with flex tube asking $700 obo(SOLD)


Tial polished 38mm wastegate with dump tube asking $200 obo (SOLD)



Rev Hard B-series log manifold $150 obo(SOLD)




Turbo XS dual stage boost controller $150 obo



Stewart Warner Digital Tach and shift light all in one!!!! $75 obo



MSD 3Bar map sensor $50
Will sell turbo setup (turbo, manifold, wastegate, 3 inch downpipe and wastegate neck and dumptube) for $900 plus shipping will accept paypal payments, certified funds (money order or cashiers check) Lets make a deal through me offers


Modified by cotorresgee at 3:47 PM 11/6/2008

 

OBX ITB'S W/ FUEL RAIL
NEVER USED BNIB

$800 PLUS PAYPAL FEES

PM FOR PICS

skunk 2 tuner series.......



stage 3 cams
springs
retainers
cam gears
stock valves

less than 300 miles

700 obo shipped

 

OBD2 Dizzy with MSD pro cap Blaster HVC coil with mount.

$220 shipped

 

00 Honda Civic DX shell
what all it includes:
4" Aliuminum Exhuast with Muffler
Omni Power Drag Coilovers
Omni Power Lower Rear Control Arms
Omni Power Upper Front Control Arms
NHRA certified CAGE Chromoly
RJS window net with sprung rod
Slotted Rotors
Hawk Pads
Full Race Sump
Aeromotive A1000 Pump
-8 feed lines -6 return lines
Chute Cable handle and release cable
Jerry Bickel Chute Mount
Shut off switch with cable to rear with T handle
00 Civic Black headlights
00 SI grill
Passenger JDM airbag DELETE cover
Type R front and Rear Lips
VIS Carbon OEM Hood
VIS Carbon Hatch
VIS Carbon Spoon Wing
Paint is FLawless 00 Civic SI BLUE
00 Civic SI Guage Cluster
Energy Suspension Full Chasiss Urethane Kit
Energy Suspension Rear Trailing Arm Kit
Rear Camber Kit
Much more cant think of off hand.
6,200 obo












--------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------


Will pay shipping on small parts and willing to work with seller on half of shipping on larger stuff. email me for more pictures or PM me with questions. 3.5% on all paypal fees

PAYPAL VERIFIED ONLY PLEASE !!!!!!!

Password JDM conversion harness obd2a to obd1 45.00


Digital 7 Programmable with HVAC coil 700.00


Digitial 7 Hand Held Programmer 100.00


Mazworx Scatter shield 100.00



MSD igniter 35.00


ARP Main Studs 2 sets 45.00 each set


01-05 Honda Civic lowering Springs 1.5” Sprint 50.00


Tial 44mm Large Springs 22.00 each

1) Green .8 bar 11.60 psi spring


2) Yellow .6 bar 8.70 psi springs


Neptune Dataloging cable 35.00


IPG V1 Turbo Camshafts with GE cam gears 350.00
mm/lift
1mm/duration
11.56 @ 253
10.92 @ 250


Speed sensor GSR 40.00


Integra mounts 35 each


OBD2a Engine Harness Injector resistor all wired in with resistor box, 5 bar map wired in. everything is all reloomed. 145.00


Virtual Works Top Mount Manifold
Wastegate Dump Tubes
4" down pipe with Flex and V-band will fit with both GT42 or s372
1300 for everything Shipped



Virtual Works Intake Manifold with Accufab 90mm Throttle body
comes with cable, IACV, Push lock Fittens for vaccum sources
For GSR head Fully polished also TPS is included.
1100 shipped



Small smudge will polish it clean before i ship lol i did have little dirty hands removing it lol but no scratches at all.


Golden Eagle Cam Gears Black 165.00



Autometer SALE



Electric fuel Pressure Gauge
#4363 with sensor 130.00


Electric fuel Pressure Gauge
No sensor 65.00


Nitrous Pressure Gauge
#4328 50.00


Boost Gauge 0-35psi
#4304 40.00



3 3/8s Tach 0-10,000 rpm With mounting cup
#6604 75.00


Oil Pressure Electric
#4353 40.00



Modified by buck02 at 2:24 PM 11/12/2008

 

Vehicle is located in Southern New Hampshire...

HAS TO GO!!! $2500 Takes it!!!

85 CRX project car. Rust free body...
Custom engine mounts for K-Series engine
Custom Blackstone Race Cars custom 4link rear end
Custom Blackstone Race Cars rollcage w/window net brackets
Custom Blackstone Race Cars aluminum dash
Fiberglass doors
Custom molded 91 crx one piece front-end
Body is prepped & ready for paint (pics do not show its current state. front has be fitted to the front of the doors so it looks correct)
Clutch cylinder brackets are done
Brake cylinder mounted
Staging brake and lever
Aluminum racing seat
Custom Lexan windows

Call jeff @ (978) 337-3234. Serious inquiries only.

 

race car partout,cams manifold topmount hondata more trade for k series parts

i have decided to try out k series so parting out my b series stuff. here it is.

Prices do not include shipping or paypal 3%

competition clutch twindisk 700
700 miles on this always used a clutch pedal stop great clutch



genuine bosch 044 fuel pump bought new has -10 in -8 out fittings included 190
drove around block on this and that is all.


deist scattershield blanket 100


moroso aluminum oilpan comes with GSR and LS oil pickups 150



ONEfab topmount manifold fits 42r 650
this was just started up and driven around the block also good as new. Does have a wastegate elbow on it now.


ARP headstuds for LS but have nice spacers so they can be used with b series vtec motors.70

B16 hydro tranny 100% mint best tranny i ever drove on. 500

AEM fuelrail with -10 in drilled for 1600cc injectors 90

hasport EK mounts stiffest urethane they make. 250
only pic i have of them




Modified by SwappedTURBOegg at 7:59 PM 11/3/2008


Modified by SwappedTURBOegg at 1:14 PM 11/4/2008


Modified by SwappedTURBOegg at 1:39 PM 11/4/2008

 

Parting this Car Out - Lots of Great Deals -- Lots of Great Parts !!!!

All Parts are basically brand new, engine and car have only been idled and driven around the parking lot, never been on a dyno or the race track.

For information or to purchase parts:

Phone -- 407-324-4684
Email -- James@IPGParts.com





The Car is still put together and we will be in the process of disassembly shortly

Pictures will be available upon request as I take them during the disassembly process -- you all know what these parts look like.

1994 Acura Integra RS - JDM Front End Complete Rolling Chassis -- $7800 -
-- Barely seen the sunlight since painted
-- Mazworx 9 Second Legal Cage (needs to be certified)
-- Stroud Parachute Setup
-- Corbeau Seats with Simpson Harnesses
-- Window Net
-- Complete Skunk2 Suspension include Pro-C Coilovers with Drag Spring Rates, Front and Rear Camber Kits, Rear Lower Control Arms
-- Complete Fuel System including Sumped Tank, Aeromotive Pro Filter, Aeromotive A1000 Fuel Pump, -10AN Lines from tank to fuel rail, -6AN Return, Aeromotive FPR
-- Autometer Shift Light with Digital Pro Shift System, AEM Oil Pressure Gauge
-- Battery relocated to the Rear
-- Sparco Flash 5 Steering Wheel with Quick Release
-- DriveShaft Shop Stage 5.9 Axles

(wheels are not included in the price, can be purchased seperately)

Darton Sleeved Assembled B18c1 Shortblock -- sold
-- 84mm CP Pistons with Upgraded Wrist Pins
-- Manley Turbo Tuff Connecting Rods
-- ACL Race Bearings
-- GSR Crankshaft
-- ATI Race Damper
-- Tapped Oil Pan
-- completely assembled from the headgasket to the oil pan, ready for your cylinder head or purchase the one we have available as well !!!

B16 Head with Trevor Johnson Headwork -- sold
-- Skunk2 Pro Series Valve Springs
-- Skunk2 Titanium Retainers
-- Skunk2 STD Size Valves

Skunk2 Pro2+ Camshafts -- $500

T1 Cam Trigger Kit including Sensor, Mount, and Golden Eagle Cam Gear -- $450

Edelbrock B16 Victor X Intake Manifold -- sold

BDL 70mm Billet Throttle Body -- sold

BDL Black Fuel Rail -- $100

RC Engineering 1600cc Injectors -- sold

Peakboost Top Mount T4 Turbo Kit including, T4 Top Mount Exhaust Manifold with Tial 60mm W/G Flange, 4" Downpipe, 3" Intercooler Pipe Kit Tial Flange with Silicone Couplers and T-Bolts, Intercooler Core, Turbo Feed and Return Lines -- $2500
turbo, wastegate, blow off valve not included in price, can be purchased seperately if you like

Intercooler Setup Only -- includes Garrett 24" x 12" x 4.5" core (32" total length including endtanks) -- 3" inlet/outlet, all silicone couplers, all t bolt clamps -- tial 50mm bov flange already in place -- for a top mount turbo setup -- $1350

Peakboost Top Mount Manifold (T4) with 4" Downpipe -- $1350

Garrett GT4294R Turbocharger with 1.01 A/R -- $1500

Tial 60mm Wastegate -- Black -- sold

Tial 50mm BOV, Blow Off Valve -- Black -- sold

Fluidyne 92-95 Civic Half Size Radiator with Slim Electric Fan -- $285

T1 Catch Can Kit, including catch can, filters, fittings, line, and Valve Cover with fittings already installed - bolt on and go !!! -- sold

GSR Transmission with Heat Treated Gears, Liberty Handcuff, Quaife LSD -- sold

Exedy Twin Disc Ceramettalic Clutch -- sold

Golden Eagle Scatter Shield -- $125

Weld 13x8 Magnum Import Drag Wheels, 5" Backspacing with Brand New MT 24.5" Slicks -- $800

Weld 15x3.5 Magnum Import Drag Wheels with Brand New MT 22.5" Tires - sold

NLR AMS-500 Boost Controller -- $325

AEM EMS, Part # 30-1040u (obd1 Civic, Integra, Accord) -- $1350

M&W Pro 10 Ignition with T1 Harness and Crane Coil -- $650

Avid Racing Pro Series Traction Bar Kit for 94-01 Integra, 92-00 Civic -- $250

Innovative Engine Mount Kit with Race Inserts for B Series into 92-95 Civic, 94-01 Integra -- $250

For information or to purchase parts:

Phone -- 407-324-4684
Email -- James@IPGParts.com