New Dyno Pulls (Vid Inside)
Thread Starter
Member
Joined: Dec 2006
Posts: 56
Likes: 0
From: Brownsville, Texas, USA
New Dyno Pulls (Vid Inside)
Thanks to Jason "st00pid" for the sick tunes on all the setups I've built over the years and to everyone who has helped out.
Same setup except that this time I built the motor myself after sending the parts off the get balanced. First motor did 757whp which was more than substantial but this one on the other hand did 829whp which is enough....for now.
Well anyways the car is now tuned and ready to make some more 9 second passes . Unfortunately the transmission wasn't ready and promptly puked fourth gear. Have no fear. Parts are on order and hope to make some more passes SOON after I dial in the chassis a little more and rebuild the tranny.
Modified by TopNotchPerformance at 1:36 AM 8/19/2008
Same setup except that this time I built the motor myself after sending the parts off the get balanced. First motor did 757whp which was more than substantial but this one on the other hand did 829whp which is enough....for now.
Well anyways the car is now tuned and ready to make some more 9 second passes . Unfortunately the transmission wasn't ready and promptly puked fourth gear. Have no fear. Parts are on order and hope to make some more passes SOON after I dial in the chassis a little more and rebuild the tranny.
Modified by TopNotchPerformance at 1:36 AM 8/19/2008
Honda-Tech Member
Joined: Jul 2003
Posts: 2,830
Likes: 0
From: NEW YORK, us
Re: New Dyno Pulls (tunedbycft)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tunedbycft »</TD></TR><TR><TD CLASS="quote">NICE numbers! Good luck running stock trannies with that power 
Fernando @ CFT</TD></TR></TABLE>
lol, im guessing that was 3rd gear? trying to keep the trans together on the dyno?
Fernando @ CFT</TD></TR></TABLE>
lol, im guessing that was 3rd gear? trying to keep the trans together on the dyno?
Trending Topics
Honda-Tech Member
Joined: Mar 2005
Posts: 319
Likes: 1
From: Arkansas/Kansas
Re: (st00pid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by st00pid »</TD></TR><TR><TD CLASS="quote">Penman, I appreciate your help on the boost control. Works like a champ!</TD></TR></TABLE>
i need something from you jason
whiskazz@sbcglobal.net
i need something from you jason
whiskazz@sbcglobal.net
Re: (labtec2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by labtec2 »</TD></TR><TR><TD CLASS="quote">the mac dad will make ya
a daddy mac will make ya
a kriss kross will make ya
jump jump lol</TD></TR></TABLE>
hahha LOL sick **** boiiiiiii
a daddy mac will make ya
a kriss kross will make ya
jump jump lol</TD></TR></TABLE>
hahha LOL sick **** boiiiiiii
Thread
Thread Starter
Forum
Replies
Last Post
CHEETAH
All Motor / Naturally Aspirated
42
Apr 21, 2005 07:05 AM
