I must say it's taken a while to get to the point where I'm at. My setup has taken some time to put together but I think I have it!!!l lol
Let me know whatt you think.

1997 Acura 1.6 El (Canada only)
2640lbs with driver
1.9l b18c block
Wiseco Pistons
Eagle rods
stock sleeves
CTR cams
Stock head and valvetrain
2.5" cooler piping
Skunk2 Intake manifold
Skunk2 68mm TB
precision intercooler
Custom Ramhorn Manifold
gt35
TialBOV and WG
S300
Avid Traction Bars
M&H 24x8x15 slicks
etc etc

Went to the track this past weekend at CSCS in Cayuga, Canada. It was my first time on slicks and I was happy with what I did. Thanks to John@ M&H for all your help. Slicks were at 12psi and the launch was set at 6600rpm. I want to try and get my time down to 11.0. Any ideas or suggestions would be appreciated.

My slip:
R/T .496
60' 1.880
330 5.106
1/8 7.699
MPH 96.92
1000 9.911
1/4 11.768
MPH 124.63

Trying to get my time down by the end of the year . More seat time needed for sure. Car is making aproximately 470@21psi.

 

Get those 60 ft's down and you'll be ridin better! nice job for that wieght.

 

M&H 24x8x15

 

edited my post when i read the size in your post. hopefully some others will chime in!

 

get that 60ft down. to a low 1.7 and you should do alright. does the car fall on its face on the launch?

 

no, it wants to go. No hesitation at all. I'm running the anti-lag and everything seems ok off the line. Thinking about lowering launch rpm.