March FS thread
02-28-2011, 09:29 PM
#1
HELLO,GOOD MORNIN'
Thread Starter
Join Date: Sep 2002
Location: Savin lives
Posts: 8,909
Likes: 0
Received 0 Likes
on
0 Posts
March FS thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
02-28-2011, 09:35 PM
#2
HELLO,GOOD MORNIN'
Thread Starter
Join Date: Sep 2002
Location: Savin lives
Posts: 8,909
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
Selling a few things just because Im doing some changes in 2011 season
GE GSR manifold Fuel Rail and Manifold 380.00-sold
GE GSR manifold Fuel Rail and Manifold 380.00-sold
Last edited by ahobbs; 03-03-2011 at 10:38 PM.
02-28-2011, 09:45 PM
#3
Honda-Tech Member
Join Date: Apr 2003
Location: Baltimore, MD, USA
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
DC Sports D series Stainless 4-1 header 150 Shipped
D series Custom Sheetmetal Intake Manifold 100 Shipped
D series AEM Alternator Underdrive pulley 30 Shipped
Venom Hi Flow Fuel Rail Fits all D series 50 shipped
D series Custom Sheetmetal Intake Manifold 100 Shipped
D series AEM Alternator Underdrive pulley 30 Shipped
Venom Hi Flow Fuel Rail Fits all D series 50 shipped
Last edited by BIGTUNA; 03-09-2011 at 01:11 PM.
02-28-2011, 10:10 PM
#4
Honda-Tech Member
Join Date: Mar 2008
Location: Iow City, Ia, U.S.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
JDM EvoIII 510cc Yellow top injectors. Came out of a running car. Injectors were supposed to have around 40k on them when I received them and I put about 5k on them. Upgraded to some 1000's and no longer need these. Asking $140 shipped OBO.
02-28-2011, 10:57 PM
#5
Honda-Tech Member
Join Date: Sep 2002
Location: Florida
Posts: 3,445
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
Precision 1600cc injectors low impedance in great shape-$375.00 shipped.
M&H 25x8.7x13 drag slicks in great shape and lots of tread left shipping not included-$250.00
-20 AN weld in aluminum bung brand new all 4-$35.00 shipped.
RPM 72mm throttle body brand new shipped via fedex with tracking # -$315.00
M&H 25x8.7x13 drag slicks in great shape and lots of tread left shipping not included-$250.00
-20 AN weld in aluminum bung brand new all 4-$35.00 shipped.
RPM 72mm throttle body brand new shipped via fedex with tracking # -$315.00
Last edited by V-SPEC 1; 03-04-2011 at 05:13 PM.
03-01-2011, 03:25 AM
#7
Honda-Tech Member
Re: March FS thread
Contact:
Rolando
Somerville, NJ
PM here on HT
Email: DynamicPerformance1llc@yahoo.com
Phone: 908-393-5086
T1 Catch Can. Powder coated black. Used on our race car. Includes 3 filters. Like new. $225 shipped
SOLD!!!!
CTR Cams. (No cam gears) $380 shipped
SOLD!!!!!
Exedy Stage 3 Htper Single Cerametallic Clutch Kit 1991-2005 Acura NSX. Used for a couple months. $600 OBO
Love Fab Tubular Manifold for a B-Series. Flanged for a T3 or T4. Comes with Tial 38mm wastegate with a dump tube. $600 Shipped OBO
Rolando
Somerville, NJ
PM here on HT
Email: DynamicPerformance1llc@yahoo.com
Phone: 908-393-5086
T1 Catch Can. Powder coated black. Used on our race car. Includes 3 filters. Like new. $225 shipped
SOLD!!!!
CTR Cams. (No cam gears) $380 shipped
SOLD!!!!!
Exedy Stage 3 Htper Single Cerametallic Clutch Kit 1991-2005 Acura NSX. Used for a couple months. $600 OBO
Love Fab Tubular Manifold for a B-Series. Flanged for a T3 or T4. Comes with Tial 38mm wastegate with a dump tube. $600 Shipped OBO
Last edited by Dynamic Performance Racing; 03-06-2011 at 05:32 PM. Reason: SOLD
Trending Topics
03-01-2011, 04:47 AM
#9
Honda-Tech Member
Re: March FS thread
Innovative Solid Mounts - $200 Shipped These have the 90A bushing/or will trade for Pure Aluminum solid mounts
AEM fuel Pressure reg Blue - $60 shipped
AEM Feul rail Silver - $60 shipped
B&R Fittings filter to rail kit black line and fittings for AEM rail - $40 Shipped
While let all fuel parts go for $150 shipped if purchased together.
Offers and Trades are welcomed
AEBS B18C1 84mm sleeved block Fresh bore and hone - $475 shipped - needs work
Update!!
Had 15 inquiries about the block so.....
Block has stripped bolt holes on the transmission side that are plugged with helicoils. It will also need an align hone, because the machine shop misplaced the original main caps. All can be fixed at any machine shop
Included:
maincaps
Gsr girdle
timing belt tensioner
water pipe
anything else pictured that i might have missed
AEM fuel Pressure reg Blue - $60 shipped
AEM Feul rail Silver - $60 shipped
B&R Fittings filter to rail kit black line and fittings for AEM rail - $40 Shipped
While let all fuel parts go for $150 shipped if purchased together.
Offers and Trades are welcomed
AEBS B18C1 84mm sleeved block Fresh bore and hone - $475 shipped - needs work
Update!!
Had 15 inquiries about the block so.....
Block has stripped bolt holes on the transmission side that are plugged with helicoils. It will also need an align hone, because the machine shop misplaced the original main caps. All can be fixed at any machine shop
Included:
maincaps
Gsr girdle
timing belt tensioner
water pipe
anything else pictured that i might have missed
Last edited by gogetta; 03-26-2011 at 05:00 PM.
03-01-2011, 05:25 AM
#10
Honda-Tech Member
Join Date: May 2005
Location: pa
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
K Series Comp Clutch Twin Disk. Low Miles. Needs disk, Stripped splines on current disk. other is alright.
K20-R Differential with new bearings
pm for price and pics. BOTH SOLD
K20-R Differential with new bearings
pm for price and pics. BOTH SOLD
Last edited by SpoolinDa; 03-07-2011 at 07:38 AM.
03-01-2011, 07:14 AM
#13
Honda-Tech Member
Join Date: Mar 2001
Location: Phoenix, AZ, USA
Posts: 2,708
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
AEM Series 2 (part number 30-6040), new in box, fits Honda/Acura with OBD1 ECU plugs. $950 shipped in the continental US.
**SOLD** Barely Used T1 Gforce Shifter kit, includes shifter, shift rod, T1 mounting plate, etc. Was $995 new, used for 5 shifts, lol. Customer didnt want to take the time to properly adjust it. His loss, your gain. $725 plus shipping. **SOLD**
Brand new RC 550cc K-series injector set, never used, only opened box to take picture. $265 shipped.
Brand New Spec Twin Disc setup, for K-series, part number SA00MT2. Rated to handle 800 ft lbs of torque, which is more than any Honda I've ever dyno tuned, lol. Includes everything show in pic. $1050 shipped.
joe@locashracing.com for more info.
**SOLD** Barely Used T1 Gforce Shifter kit, includes shifter, shift rod, T1 mounting plate, etc. Was $995 new, used for 5 shifts, lol. Customer didnt want to take the time to properly adjust it. His loss, your gain. $725 plus shipping. **SOLD**
Brand new RC 550cc K-series injector set, never used, only opened box to take picture. $265 shipped.
Brand New Spec Twin Disc setup, for K-series, part number SA00MT2. Rated to handle 800 ft lbs of torque, which is more than any Honda I've ever dyno tuned, lol. Includes everything show in pic. $1050 shipped.
joe@locashracing.com for more info.
Last edited by locash; 03-01-2011 at 07:26 PM.
03-01-2011, 11:13 AM
#14
Honda-Tech Member
Join Date: Jan 2005
Location: Raleigh, NC
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
P/N: 4-8022-C
Works on all 92-00 transmissions, 88-91 will need a custom or modified throw-out bearing.
Looking to get $1050 shipped/paypal'd, though will consider any reasonable offer.
Thanks, Kevin
03-01-2011, 11:41 AM
#15
Honda-Tech Member
Join Date: Nov 2006
Location: md
Posts: 993
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
-Competition Twin Disc $750
-K20 head $1400(head needs to be milled but the valvetrain and cams are in great shape)
supertech full valvetrain. Stainless Nitride coated intake valves. Inconel exhaust valves. All standard size. Seats from supertech as well. Ep3 cut rockers for single lobe. Drag Cartel drop in cams cut to single lobe.
-K24 crank $150
K series intake manifold $450
Hybrid K series Solid Mounts for EK brand new $450
-K20 head $1400(head needs to be milled but the valvetrain and cams are in great shape)
supertech full valvetrain. Stainless Nitride coated intake valves. Inconel exhaust valves. All standard size. Seats from supertech as well. Ep3 cut rockers for single lobe. Drag Cartel drop in cams cut to single lobe.
-K24 crank $150
K series intake manifold $450
Hybrid K series Solid Mounts for EK brand new $450
Last edited by BILLY_BAD_A$$; 03-31-2011 at 05:24 AM.
03-01-2011, 01:06 PM
#16
Honda-Tech Member
iTrader: (2)
Join Date: May 2008
Location: Houston, TX
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
Precision 1600cc Injectors - SOLD
Aeromotive fuel pump speed controller - $225 shipped
Aeromotive fuel pump speed controller - $225 shipped
Last edited by sweetfwdthunder; 03-30-2011 at 06:09 PM. Reason: sold injectors
03-01-2011, 03:34 PM
#18
Honda-Tech Member
iTrader: (1)
Join Date: May 2005
Location: Northern UT
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
F.S. Used parts. Buyer pays shipping.
bosch 1000cc injectors. $200
GT35R DBB 61mm, 70A/R compressor housing. 67mm T4 1.06 back housing. $700
Oddyssey battery pc680 15lbs bought new 7 months ago has 2 year warranty $75
LS cable trans $100+shipping
bosch 1000cc injectors. $200
GT35R DBB 61mm, 70A/R compressor housing. 67mm T4 1.06 back housing. $700
Oddyssey battery pc680 15lbs bought new 7 months ago has 2 year warranty $75
LS cable trans $100+shipping
03-01-2011, 04:44 PM
#19
Honda-Tech Member
Join Date: Nov 2003
Location: NJ, 07728
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
Turbo set up made 650hp+ when it was on the car with a t3 67trim turbo
Full race ramhorn T3 turbo manifold - $550 obo
Full race 3" downpipe slight dent but flows fine O2 sensor not included - $200 obo
Tial 44mm wastegate w/dumptube - $285 obo
AEBS intake manifold SOLD!!!!!
Precision 825 hp intercooler brand new in box - $495 obo
Inline Pro T4 cast iron turbo manifold brand new (not pictured) - $400 obo
Custom 3" exhaust system w/borla muffler (not pictured) - $300 pick up only
Tial BOV brand new in box (purple) (not pictured)- $200 or obo
Any questions email me @ boostedeg@yahoo.com or PM me.
Last edited by boostedeg; 03-05-2011 at 10:56 AM.
03-01-2011, 07:04 PM
#20
Honda-Tech Member
Join Date: Jul 2001
Location: toronto, on, canada
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
Hasport solid mounts $400
2 sets of driveshaft shop axels 3.9s with a set of hubs one set is barnd new still in the box $1400 obo
Six sigma race header with megaphone $1100 obo
Rear Kens Kustom Trailing arm with Strange shocks 80lb springs and Weld wheels bolts up on 88-01 civic or Integra $2500 obo
Front penske shocks with resevoirs $800obo
Skunk2 upper control arms $150obo
Kens Kustom single wheel wheelie bars $500obo
Front lower control arms with custom solid bushing $120obo
Custom carbon fiber one piece front end $1200 obo
Franks Custom fiberglass doors modified window frame for ef with door pins needs a little work complete with hardware $600obo
pro stock wing $300
Buyer pays shipping
Pm me or email me at vr6this@hotmail.com
or rolling chassis for$5,000obo
2 sets of driveshaft shop axels 3.9s with a set of hubs one set is barnd new still in the box $1400 obo
Six sigma race header with megaphone $1100 obo
Rear Kens Kustom Trailing arm with Strange shocks 80lb springs and Weld wheels bolts up on 88-01 civic or Integra $2500 obo
Front penske shocks with resevoirs $800obo
Skunk2 upper control arms $150obo
Kens Kustom single wheel wheelie bars $500obo
Front lower control arms with custom solid bushing $120obo
Custom carbon fiber one piece front end $1200 obo
Franks Custom fiberglass doors modified window frame for ef with door pins needs a little work complete with hardware $600obo
pro stock wing $300
Buyer pays shipping
Pm me or email me at vr6this@hotmail.com
or rolling chassis for$5,000obo
Last edited by Allmotor B20; 03-08-2011 at 03:21 AM.
03-01-2011, 07:26 PM
#21
Honda-Tech Member
Join Date: Feb 2003
Location: Duncannon, PA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
These are M&H Street & Strip DOTs in the 235/60/15 size. I got these towards the end of the race season last year and only put 12 passes total on them. There are 8/32nds left on both tires. Reason I'm selling is to go back to running slicks again.
I ran these on a set of 15" rota slips and ran 28psi in them on the street and dropped them down to 10psi at the track. Pretty convenient not having to unbolt street tires and switch to slicks. I cut a best 60' of 1.87 and that was running a bunch of boost in first gear with 110 racegas.
$240 picked up or $270 shipped
I ran these on a set of 15" rota slips and ran 28psi in them on the street and dropped them down to 10psi at the track. Pretty convenient not having to unbolt street tires and switch to slicks. I cut a best 60' of 1.87 and that was running a bunch of boost in first gear with 110 racegas.
$240 picked up or $270 shipped
Last edited by BoostingSnail; 03-02-2011 at 05:44 AM.
03-02-2011, 10:59 AM
#23
Honda-Tech Member
Join Date: Oct 2007
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS thread
All prices are without shipping or paypal fees. Will send pics
please text me with questions.. phone # (909)648-3810
MOTOR::::: Everything is Brand new, Long block had a start-up when built by Bob McCray
H22 800 hp custom build motor
Golden eagle manifold (Brand New) $SOLD
golden eagle fuel rail (Brand New) $100
BoB Mckray ported and polished head
ferrea valves and springs retainers
JE custom 9.5.1 dish pistons
Custom H-beam rods
Darton sleeved block
custom belt pulleys
motor blueprinted and balance by CLU
clevite bearings
Drive oil pump
moroso oil pan
fidanza enlighten flywheel
Scatter shield
brand new starter, alternator
hyper stage 6 clutch
heavy duty pressure plate
$4000 for motor and trans
3 sets of h22 to EG axles (hasport, custom, Driveshop) $175 each or $350 for 3 sets
Lenzo vpd wheels with 24.5 x 9 and skinnies $900
skunk2 pro rear lower control arms. $150
H22 EG Hasport motor mounts- $300
skunk2 70mm throttlebody with 4 bar map sensor (brand New) $300
aeromotive fuel pressure reg $150 brand new still in package
brand new never ran SYNAPSE turbo manifold t3/t4 $700
brand new PRECISION t3/t4 turbo 6765 billet wheel h cover $1000
HONDATA S300 IS SOLD
innovative lm-1 wideband $250
TIAL 44 wastegate $200
1680 cc injectors (bosch) $250 shipped
880 cc precision injectors included $150 shipped
please text me with questions.. phone # (909)648-3810
MOTOR::::: Everything is Brand new, Long block had a start-up when built by Bob McCray
H22 800 hp custom build motor
Golden eagle manifold (Brand New) $SOLD
golden eagle fuel rail (Brand New) $100
BoB Mckray ported and polished head
ferrea valves and springs retainers
JE custom 9.5.1 dish pistons
Custom H-beam rods
Darton sleeved block
custom belt pulleys
motor blueprinted and balance by CLU
clevite bearings
Drive oil pump
moroso oil pan
fidanza enlighten flywheel
Scatter shield
brand new starter, alternator
hyper stage 6 clutch
heavy duty pressure plate
$4000 for motor and trans
3 sets of h22 to EG axles (hasport, custom, Driveshop) $175 each or $350 for 3 sets
Lenzo vpd wheels with 24.5 x 9 and skinnies $900
skunk2 pro rear lower control arms. $150
H22 EG Hasport motor mounts- $300
skunk2 70mm throttlebody with 4 bar map sensor (brand New) $300
aeromotive fuel pressure reg $150 brand new still in package
brand new never ran SYNAPSE turbo manifold t3/t4 $700
brand new PRECISION t3/t4 turbo 6765 billet wheel h cover $1000
HONDATA S300 IS SOLD
innovative lm-1 wideband $250
TIAL 44 wastegate $200
1680 cc injectors (bosch) $250 shipped
880 cc precision injectors included $150 shipped
Last edited by vtec_killer_; 03-23-2011 at 09:52 AM. Reason: Sold the Rolling Chassis
03-02-2011, 02:56 PM
#24
Honda-Tech Member
Re: March FS thread
silver pro comp 2.1/16 water temp gauge 100-250 temp=30 bux
silver pro comp 2 1/16 0-100 oil psi gauge 40 bux
aem wide band gauge with new sensor 175 bux
silver sport comp monster tach 10,000 with adjustable rpm setting and external shift light=175 bux
phantom 2 1/16 0-100 psi mechanical fuel gauge 30 bux
phantom 2 1/16 30psi boost gauge 40 bux
96-00 civic 2 gauge cluster bezel 30 bux
autometer low oil psi pencil warning light with 15 psi sensor=40 bux
2 gauge pillar mount for 2 1/16 gauges fits 96- civic/integra =25 bux
00 civic si cluster 175 bux
aem twin fire and aem pencil coils make offer
aem 30-1020 ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $600
ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)
2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux
2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux
5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc
fullrace_t3 t67ho turbo 82 back/70 front housing p trim wheel no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_
''''' LOOKING FOR A ATV WITH PLOW WILL TRADE FOR PARTS OR BUY OUT RITE''''
__________________
silver pro comp 2 1/16 0-100 oil psi gauge 40 bux
aem wide band gauge with new sensor 175 bux
silver sport comp monster tach 10,000 with adjustable rpm setting and external shift light=175 bux
phantom 2 1/16 0-100 psi mechanical fuel gauge 30 bux
phantom 2 1/16 30psi boost gauge 40 bux
96-00 civic 2 gauge cluster bezel 30 bux
autometer low oil psi pencil warning light with 15 psi sensor=40 bux
2 gauge pillar mount for 2 1/16 gauges fits 96- civic/integra =25 bux
00 civic si cluster 175 bux
aem twin fire and aem pencil coils make offer
aem 30-1020 ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $600
ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)
2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux
2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux
5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc
fullrace_t3 t67ho turbo 82 back/70 front housing p trim wheel no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_
''''' LOOKING FOR A ATV WITH PLOW WILL TRADE FOR PARTS OR BUY OUT RITE''''
__________________
03-02-2011, 09:12 PM
#25
Re: March FS thread
I'm selling a precision billet 6262BB. The turbo is no more than one season old. Has a couple handfuls of track use and probably a couple hours on the dyno. The car was not street driven much at all.
specs:
Exhaust:
T3 inlet
.63a/r housing
4bolt outlet
brand new turbine wheel
center:
Ball Bearing
compressor:
62mm billet wheel
SP housing (S housing with ported shroud)
This turbo took a chunk of a screw that went through the motor. It was sent to precision to repair. They tore it down, refreshed it, and installed a brand new exhaust wheel. It just came back from Precision and has no use on it since. While all this was happening, we upgraded to a 372.
PM me for info. I have many vouches throughout the site and am paypal verified so buy with confidence.
$975 plus shipping from MN
[/QUOTE]
specs:
Exhaust:
T3 inlet
.63a/r housing
4bolt outlet
brand new turbine wheel
center:
Ball Bearing
compressor:
62mm billet wheel
SP housing (S housing with ported shroud)
This turbo took a chunk of a screw that went through the motor. It was sent to precision to repair. They tore it down, refreshed it, and installed a brand new exhaust wheel. It just came back from Precision and has no use on it since. While all this was happening, we upgraded to a 372.
PM me for info. I have many vouches throughout the site and am paypal verified so buy with confidence.
$975 plus shipping from MN
[/QUOTE]